Titan TTI913TOR Manuel utilisateur

Original Instructions_MNL_TTI913TOR_GB_BX220IM_V01_220420

WARNING: Read the instructions before using the product!

TTI913TOR

Let’s

get started...

In more detail...

Intended use

Product functions

Care and maintenance

Troubleshooting

Recycling and disposal

Guarantee

Declaration of conformity

Getting Started...

Safety information

Symbols

Your product

Technical specifications

Before you start

These instructions are for your safety. Please read through them

thoroughly before use and retain them for future reference.

Getting Started...

TTI913TOR Safety information

Safety warnings

WARNING! Read all safety warnings, instructions,

illustrations and specifications provided with this

torch. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious

injury. Save all warnings and instructions for future

reference.

WARNING! Fire hazard. Do not operate torch near

flammable liquids or in gaseous or explosive

atmospheres. Internal sparks may ignite fumes

causing personal injury.

WARNING! Do not place the torch in a position

which may cause anyone to intentionally or

unintentionally stare into the torch. Serious eye

injury could result.

Do not expose torch to wet or damp areas. Do not

expose torch to rain or snow.

Do not wash torch with water or allow water to get inside

torch. Do not submerge torch in water at any time.

Check the torch, its battery pack and charger for

damage before each use. Do not use the product if it is

damaged.

The torch shall be always used with its protective shield.

If the protective shield is cracked, it shall be replaced.

EN TTI913TOR

Safety information

Getting Started...

CAUTION! When not in use, place torch on its side

on a stable surface where it will not cause a tripping

or falling hazard. Some products with large battery

packs will stand upright on the battery pack but may

be easily knocked over.

BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

Use torch only with specifically designated battery

packs. Use of any other battery packs may create a risk

of injury and fire.

When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

Do not use battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or temperature

above 130 °C may cause explosion.

TTI913TOR Safety information

Getting Started...

>Follow all charging instructions and do not charge

the battery pack outside the temperature range

specified in the instructions. Charging improperly or

at temperatures outside the specified range may

damage the battery and increase the risk of fire.

SERVICE

Have your torch serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the torch is maintained.

Never service damaged battery packs. Service of

battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY WARNINGS FOR BATTERY

Do not connect the positive terminal and negative terminal

of the battery to each other with any metal object (such

as wire).

Do not carry or store battery together with necklaces,

hairpins or other metal objects.

Do not pierce the battery with nails, strike the battery

with a hammer, step on the battery or otherwise subject

it to strong impacts or shocks.

Do not solder directly onto the battery.

Do not expose battery to water or salt water, or allow the

battery to get wet.

Do not disassemble or modify the battery.

Do not place the battery in or near fire, on stoves or other

high temperature locations. Do not place the battery in

direct sunlight, or use or store the battery inside cars in

hot weather.

Do not place the battery in microwave ovens, highpressure

containers or on induction cookware.

EN TTI913TOR

Safety information

Getting Started...

Additional safety warnings for charger

If you intend to store a battery for a period without use

then store battery at room temperature (19°C to 25°C),

charged to about 30 – 50% of capacity. When storing for

very long periods boost charge the battery once per year

to prevent over discharge.

This charger can be used by children aged from 8 years

and above and persons with reduced physical, sensory

or mental capabilities or lack of experience and knowledge

if they have been given supervision or instruction

concerning use of the charger in a safe way and

understand the hazards involved.

Children shall not play with the charger. Cleaning and

user maintenance shall not be made by children without

supervision.

Disconnect the charger from the power supply and allow

it to cool down before cleaning, maintenance, storage

and transportation.

Before using the charger, read all the instructions and

cautionary markings on the charger and battery pack.

The charger and battery pack supplied with it are

specifically designed to work together. Only use the

charger with the battery pack specified for this product.

Charge the battery pack indoors only as the charger is

designed for indoor use only.

Do not charge non-rechargeable batteries.

Protect the charger against moisture and wet conditions.

There is a danger of electric shock.

Do not place any object on top of the charger as it could

cause overheating. Do not place the charger near any

heat source.

Do not use an extension cord unless it is absolutely

necessary. The use of an improper extension cord could

cause the risk of fire, electric shock or electrocution.

TTI913TOR Safety information

Getting Started...

Do not use the charger if it has been subjected to a

heavy knock, dropped or otherwise damaged in any

way. Have the charger checked and repaired by an

authorised service centre.

EN TTI913TOR

Symbols

Getting Started...

Do not dispose of battery packs in rivers or immerse in water.

Do not dispose of battery packs in fire. They will explode and

cause injury.

Do note expose battery packs to heat in excess of 45ºC.

Do not charge or store the battery pack in temperatures below

0°C (32°F) and above 45°C (113°F).

Class III torch.

Do not stare at the operating light source.

Manufacturing date code: Year of manufacturing (20yy) and week

of manufacturing (Wxx)

The product complies with the applicable European directives and

an evaluation method of conformity for these directives was done.

WEEE symbol. Waste electrical products should not be disposed

of with household waste. Please recycle where facilities exist.

Check with your Local Authority or local store for recycling advice.

Crossed out dust bin. Batteries and battery packs should not be

disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or local store for recycling

advice.

Indoor use only.

Approx. 1h charging time.

Replace any cracked protective shield

Symbols

TTI913TOR Symbols

Getting Started...

This is a product of class II. This means it is equipped with an

insulation reinforced or double insulation.

Time lag fuse with rated current of 3.15A

Read instructions manual

Maximum ambient temperature

The product complies with the applicable European directives

and an evaluation method of conformity for these directives was

done.

UK Conformity Assessed.

ta:

EN TTI913TOR

Your product

Getting Started...

Your product

1. Lens (Transparent cover)

2. Rotative torch head

3. ON/OFF switch

4. Main handle

5. Battery pack release button

6. Battery pack

a. Battery docking port

c. Air vents

d.Charging status indicator (RED)

e.Power indicator (GREEN)

b. Battery capacity indicators

c. Battery capacity button

a. Sliding slots

b. Power cord with plug

7. Charger

Table des matières

Autres manuels Titan Outils électriques

Titan

Titan SF1500XP Manuel d'installation

Titan

Titan TTB280DRH Manuel d'installation

Titan

Titan TTB883ROU Manuel utilisateur

Titan

Titan 51886 Manuel utilisateur

Titan

Titan TTI882MLT Manuel utilisateur

Titan

Titan LX-70 Manuel utilisateur

Titan

Titan TTB924DBT Manuel utilisateur

Titan

Titan TT5MTP33BP-2 Manuel utilisateur

Titan

Titan CAPSpray 0524000 Manuel utilisateur

Titan

Titan TT5MTP26-2 Manuel utilisateur

Titan

Titan SF2843 Manuel d'installation

Titan

Titan SF800XPL Manuel d'installation

Titan

Titan TTB591ROU Manuel d'installation

Titan

Titan TTB773HTG Manuel utilisateur

Titan

Titan Pro V55 Manuel utilisateur

Titan

Titan TS005V2 Manuel utilisateur

Titan

Titan TTB285JSW Manuel utilisateur

Titan

Titan TM45FG Manuel utilisateur

Titan

Titan TTI866JSW Manuel utilisateur

Titan

Titan TTK587GD0 Manuel d'installation

Titan

Titan SF1022 Manuel d'installation

Titan

Titan TTB284HTG Manuel d'installation

Titan

Titan TTB935HTG Manuel utilisateur

Titan

Titan PR 33 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel