Titan TTI882MLT Manuel utilisateur
Original Instructions_TTI882MLT_(EN)_V01_220222
TTI882MLT
WARNING! Read the instructions before using the product!
EN
2
TTI882MLT
Let's
get started...
These instructions are for your safety. Please read through them thoroughly
before use and retain them for future reference.
Getting started... 02
Safety 03
Symbols 17
Your product 18
Technical and legal information 19
Before you start 21
In more detail... 26
Product functions 27
Operation 30
Care and maintenance 33
Trouble shooting 36
Guarantee 38
Declarations of conformity 39
33
Getting started...
EN
TTI882MLT
Safety warnings
General power tool safety warnings
WARNING! Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for
future reference. The term “power tool” in
the warnings refers to your mains-operated
(corded) power tool or battery operated
(cordless) power tool.”
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Safety
44
Getting started...
EN TTI882MLT
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
Safety
55
Getting started...
EN
TTI882MLT
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non- skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off- position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or longhair
can be caught in moving parts.
Safety
66
Getting started...
EN TTI882MLT
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a
second.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the rate
for which it was designed.
2. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
3. Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dangerous
in the hands of untrained users.
Safety
77
Getting started...
EN
TTI882MLT
5. Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
8. Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
Battery tool use and care
1. Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
Safety
88
Getting started...
EN TTI882MLT
3. Use power tools only with specifically
designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
4. When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
5. Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
6. Do not use battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
7. Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
8. Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
Safety
99
Getting started...
EN
TTI882MLT
Service
1. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
2. Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
Additional safety warnings for multi tool
1. Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
2. Where possible, secure workpieces to prevent them
from moving under the tool.
3. Do not force the tool; let the tool do the work at
a reasonable speed. Overloading will occur if too
much pressure is applied and the motor slows
resulting in inefficient operating and possible
damage to the motor.
4. Only use application accessories in good condition.
Do not use them if they are damaged or worn.
5. Do not touch the moving sanding sheet or blade,
Safety
1010
Getting started...
EN TTI882MLT
risk of injury.
6. Do not treat the surface to be worked with solvent
containing fluids. Materials being heated by the
scraping can cause toxic vapours to develop.
7. Exercise extreme caution when handling the scraper
accessory. The accessory is very sharp; danger of
injury.
8. Keep your hands away from the cutting area. Do not
reach under the material being cut.
9. Ensure that you have removed foreign objects such
as nails and screws from the workpiece before
commencing sanding.
10.Don’t use the tool for wet sanding. For dry sanding
only.
11.Do not continue to use worn, torn or heavily clogged
sanding sheets.
12.Do not scrape wet or dampened materials (e.g.
wallpaper) or on moist surfaces. Penetration of
water into the machine increases the risk of an
electric shock.
Additional safety warnings for battery
1. Do not connect the positive terminal and negative
terminal of the battery to each other with any metal
object (such as wire).
Safety
Table des matières
Autres manuels Titan Outils électriques
Titan
Titan TT5MTP26-2 Manuel utilisateur
Titan
Titan TM45FG Manuel utilisateur
Titan
Titan SF1022 Manuel d'installation
Titan
Titan CAPSpray 0524000 Manuel utilisateur
Titan
Titan TTB280DRH Manuel d'installation
Titan
Titan Pro V55 Manuel utilisateur
Titan
Titan TTB935HTG Manuel utilisateur
Titan
Titan SF800XPL Manuel d'installation
Titan
Titan SF2843 Manuel d'installation
Titan
Titan EHS Manuel utilisateur
Titan
Titan TTB773HTG Manuel utilisateur
Titan
Titan TTB924DBT Manuel utilisateur
Titan
Titan TTB285JSW Manuel utilisateur
Titan
Titan TTK587GD0 Manuel d'installation
Titan
Titan TS005V2 Manuel utilisateur
Titan
Titan TT5MTP33BP-2 Manuel utilisateur
Titan
Titan LX-70 Manuel utilisateur
Titan
Titan TTB284HTG Manuel d'installation
Titan
Titan PR 33 Manuel utilisateur
Titan
Titan TTI913TOR Manuel utilisateur
