Titan TM45FG Manuel utilisateur

OPERATION MANUAL

TM45FG

TITAN MACHINERY CO., LTD.

www. Titanmachine y.com.cn

1. In order to safety operate the machine please read the

instruction manual seriously especially the “ Safety Items ”

before installation and operation otherwise running machine is

not allowed.

2. The machine was manufacturered according to the following

standards：

EN13128-2001:《Safety of machines-Milling

machines(including boring machine)》；

EN12717-2001 《 Safety of machines tools-drilling

machine》；

EN60204-1:2006《Safety of machinery-Electrical equipment

of machines –Part1:General requirements》；

3. For anything else please contact us according to the following

informations at the proper time：

ENVIRONMENTAL PROTECTION NOTICE

Following instructions should be abided when machine have

to be scrapped finally：

1、 The poisonous, harmful article or un-degradated waste

materials and other waste electric components which can

not be re-used should be sent to the designated place to

deal with.

2、 The waste liquids like lubrication oil and coolant which

cannot be re-used should be sent to the designated place to

deal with.

3、 We suggest the workshop to equip with drawing device to

exhaust the poisonous, harmful gases created during

machining。

1. SAFETY ITEMS

1.BASIC SAFETY ITEMS

▲ DANGER！

1.1The electric system should have good earth, the yellow and

green leads should not less than 2.5mm

。 The required

earth line which import power supply general earth terminal are

muti-ply yellow/green soft wires which≥4mm

，and connect to

copper bar. Machine and building should have reliable earth

system.

1.2 The un-trained person should not operate the machine

otherwise will be dangerous.

1.3 Don’t touch the place marked “lightning” when machine

electrified otherwise will get an electric shock.

1.4 Remove and re-equip the safety guard without authorization

is forbidden.

1.5 Remember the position of emergency stop button so that you

can stop the machine in any case.

1.6 Do not open the safety guard when machine running.

▲ WARNING！

1.7 Do not touch the rotating workpiece and tools.

1.8 Check moving parts of machine and make sure the safety

guard is reliable before power connection.

▲ NOTE！

1.9 Un-specific person cannot open the electric box to repair the

electrical equipment.

1.10 We suggest use the coolant accorded with environment

protection and assigned lubricant.

2. SAFETY ITEMS WHEN OPERATING

▲ DANGER！

2.1 The installed work piece and tool should be firmed and reliable,

prevent the work piece from interference with other parts of

machine otherwise not to run the machine.

2.2 Make sure no obstacles in the running range before starting

machine otherwise not to run the machine.

2.3 Close the safety guard to prevent injury from the chips and

spattering coolant when machine running.

2.4 Stop all other operation when changing tool or work piece.

2.5 Check after installing work piece make sure the firm clamping

then start milling or drilling.

2.6 Do not use the wet hand to touch the electric components

otherwise the created short-circuit will cause personal injury.

2.7 Turn the feed switch button to the （OFF），and turn the

feed control button to（0） when tapping。

2.8 Adjust flow of coolant under the circumstance of stopping.

2.9 Do not wear gloves when operating machine.

2.10 Machine put on the flat and firmed foundation which should

be ready a month ago and then level the machine.

2.11 When lifting the machine, make sure the lifting device is

reliable; the load of lifting equipment should bigger than the

machine gross weight and the defected lifting tools are

forbidden; lock all handles before lifting and put soft things

between ropes and machine to avoid of damaging the machine

and paintings.

2.12 Fix the foundation bolt to prevent machine from inclining.

2.13 Make sure machine in good status before operation.

2.14 Remove the chips timely when heavy cutting because the hot

chips will catch fire.

2.15 Do not touch the coolant with naked hand. To wear the

special gloves avoid of skin allergy.

▲ NOTE！

2.16 Timely lubricate the machine according to the instruction

manual.

2.17Suggest not running the machine during the thunder weather.

2.18 If you want to leave for a while shut off the power supply

switch on the operation panel and the main power supply switch

after finishing procession.

3. MAINTENANCE SAFETY ITEMS

▲ DANGER！

3.1 Shut off the general power supply before performing any

maintenance and do not let anyone else to start the machine.

3.2 Shut off the power supply a period of time and check with

multimeter to make sure no more dangerous voltage then start

to repair.

3.3 Do not remove the safety device of machine (such as limit

switch, dog etc) otherwise safety accident will be caused.

3.4 Make sue all removed parts recover then running machine.

▲ WARNING！

3.5 Electric equipment maintenance should be performed by the

qualified electric engineer.

3.6 Do not remove or change the mutual- lock structure like limit

switch , dog and etc.

▲ NOTE！

3.7 The changed electric components should be same with the

original one.

3.8 Put the removed parts far away from the machine to keep

safety.

4、SAFETYGUARD POINTS FOR ATTENTION

▲ DANGER！

4.1 Stop machine when cleaning。

▲ WRNING！

4.2 Change the easy damaged parts according to the manual.

▲ NOTE！

4.3 Clean the machine after working to keep working place clean.

2. USAGE AND FEATURES

The machine may perform drilling, enlarging, tapping,

milling and surface machining to the small and medium sized

parts with good rigidity and high accuracy. It is also possess

auto-tapping function. Machine have 4 spindle auto feed for

selection according to the different materials and different

procession size. It is widely used in factory, school , family and

etc.

1. MAIN STRUCTURE AND FEATURES

The machine is consist of base, column, cross table, spindle

box, motor and etc. The spindle can get 6 to 12 speeds by the

motor through gear transmission of each axis. Strong structure of

spindle may install many kinds of tools to process and the

spindle sleeve is equipped with lock device which make the

positioning more reliable. Also the super strong column make

machine more rigidity.

The machine is applied with 3 phase motor and equipped

with complete coolant system.

The machine is applied with gear transmission and gears are

more durable after special treating. When need to adjust speed,

two groups of sliding gear adjusted by the speed handle, easy

operation and flexible.

2. MACHINE TRANSPORTION AND INSTALLATION

DIA.1

Dia.1

1、TRANSPORTION

Machine sends to the customer with solid packing. Please pay

attention to the marks (especially the rope position and center

Table des matières

Autres manuels Titan Outils électriques

Titan

Titan SF2843 Manuel d'installation

Titan

Titan TTK587GD0 Manuel d'installation

Titan

Titan TTB285JSW Manuel utilisateur

Titan

Titan TT5MTP26-2 Manuel utilisateur

Titan

Titan EHS Manuel utilisateur

Titan

Titan TTB284HTG Manuel d'installation

Titan

Titan PR 33 Manuel utilisateur

Titan

Titan TTI913TOR Manuel utilisateur

Titan

Titan SF800XPL Manuel d'installation

Titan

Titan 51886 Manuel utilisateur

Titan

Titan TTI882MLT Manuel utilisateur

Titan

Titan TTI866JSW Manuel utilisateur

Titan

Titan TTB924DBT Manuel utilisateur

Titan

Titan TTB935HTG Manuel utilisateur

Titan

Titan TTB773HTG Manuel utilisateur

Titan

Titan Pro V55 Manuel utilisateur

Titan

Titan SF1500XP Manuel d'installation

Titan

Titan TTB280DRH Manuel d'installation

Titan

Titan CAPSpray 0524000 Manuel utilisateur

Titan

Titan TTB883ROU Manuel utilisateur

Titan

Titan TS005V2 Manuel utilisateur

Titan

Titan TTB591ROU Manuel d'installation

Titan

Titan TT5MTP33BP-2 Manuel utilisateur

Titan

Titan LX-70 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel