Titan TTI866JSW Manuel utilisateur

Original Instructions_MNL_TTI866JSW_GB_V01_220221

TTI866JSW

WARNING: Read the instructions before using the product!

V11221 / BX220IM

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 1 2021/12/22 1:37 PM

In more detail...

Product functions

Operation

Care and maintenance

Troubleshooting

Recycling and disposal

Guarantee

Declaration of conformity

Getting started...

Technical and legal information

Your product

Technical

Before you start

These instructions are for your safety. Please read through them

thoroughly before use and retain them for future reference.

Let’s

get started...

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 2 2021/12/22 1:37 PM

TTI866JSW

Getting started...

Safety information

Safety warnings

General power tool safety warnings

WARNING! Read all safety warnings,

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 3 2021/12/22 1:37 PM

instructions, illustrations and specifications

provided with this power tool. Failure to follow

all instructions listed below may result in electric

shock, fire and/or serious injury.

TTI866JSW

Getting started...

EN Safety information

Safety warnings

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool.

switch or energising power tools that have the switch

on invites accidents.

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 4 2021/12/22 1:37 PM

TTI866JSW

Getting started...

Safety information

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 5 2021/12/22 1:37 PM

TTI866JSW

Getting

started...

EN Safety information

Safety warnings

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) Battery tool use and care

manufacturer. A charger that is suitable for one type

with another battery pack.

battery packs. Use of any other battery packs may

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 6 2021/12/22 1:37 PM

TTI866JSW

Getting started...

Safety information

c) When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

e) Do not use battery pack or tool that is damaged or

risk of injury.

or excessive temperature.

temperature above 130 °C may cause explosion.

g) Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

Charging

range may damage the battery and increase the risk

6) Service

repair person using only identical replacement

parts. This will ensure that safety of the power tool is

maintained.

b) Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 7 2021/12/22 1:37 PM

TTI866JSW

Safety information

Getting started...

Safety warnings

Jig Saw safety warnings

a) Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fastener contacting a

“live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

b) Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the workpiece by hand or against your body leaves it

unstable and may lead to loss of control.

c) Turn the product off immediately, if the cutting

blade gets jammed.

d) Ensure that the workpiece is free of foreign objects

such as screws or nails.

e) The power tool shall not be wet or applied in wet

environment. Keep the handles dry to ensure safe

control.

f) Grip the product securely with two hands so you

have full control at all times.

g) Ensure that the air vents are always unobstructed

and clear. Clean them if necessary with a soft brush.

Blocked air vents may lead to overheating and damage

the product.

h) Switch the product off immediately if you are

disturbed while working by other people entering

the working area. Always let the product come to

complete stop before putting it down.

i) Do not overwork yourself. Take regular breaks to

ensure you can concentrate on the work and have full

control over the product.

j) Keep hands away from the sawing area. Do not

reach under the workpiece. Contact with the saw

blade can lead to injuries.

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 8 2021/12/22 1:37 PM

TTI866JSW

Getting started...

Safety information EN

k) Only bring the power tool into contact with the

workpiece when switched on. Otherwise there

is danger of kickback if the cutting tool jams in the

workpiece.

l) Ensure that the base plate always rests securely

while sawing. A jammed saw blade can break or lead

to kickback.

m) When the cut is completed, switch off the power

tool and then pull the saw blade out of the cut only

after it has come to a standstill. In this manner you

can avoid kickback and can place down the power tool

securely.

n) Use only undamaged saw blades that are in

perfect condition. Bent or dull saw blades can break,

o) Do not brake the saw blade to a stop by applying

side pressure after switching off. The saw blade

can be damaged, break or cause kickback.

p) Use suitable detectors to determine if there are

hidden supply lines or contact the local utility

company for assistance. Contact with electric cables

can lead to explosion. Breaking water pipes causes

property damage.

Additional safety warnings for battery pack

a) Battery pack needs to be charged before use.

Always refer to the charger’s instruction and charge it

properly.

b) Remove the battery pack from the product when

not in use.

c) Don’t maintain the battery pack on the charger

when not in use.

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 9 2021/12/22 1:37 PM

TTI866JSW

Getting

started...

Safety information

Safety warnings

d) After extended periods of storage, it may be

necessary to charge and discharge the battery pack

several times to obtain the maximum performance.

e) Longer life and better performance can be obtained

if the battery is charged when the air temperature

is between 18°C and 24°C. Do not charge the battery

in air temperature below 5°C or above 40°C. This is

important as it can prevent serious damage to the

battery.

f) Do not charge battery in a damp or wet location.

Following this rule will reduce the risk of electric shock.

g) Do not disassemble the battery and avoid

mechanical damage to the battery. Risk of short

circuit and fumes may be emitted. Ensure fresh air

and seek medical assistance in the event of discomfort.

h) When disposing of battery pack, keep the battery

pack of different electrochemical systems separate

from each other.

The following information applies to professional

users only but is good practice for all users:

ADDITIONAL SAFETY WARNING FOR

CONSTRUCTION DUST

The updated Control of Substances Hazardous to Health

Regulations 1st October 2012 now also targets to reduce

the risks associated with silica, wood and gypsum dusts.

Construction workers are one of the at- risk groups within

this because of the dust that they breathe: silica dust is

not just a nuisance; it is a real risk to your lungs!

MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 10 2021/12/22 1:37 PM

Table des matières

Autres manuels Titan Outils électriques

Titan

Titan 51886 Manuel utilisateur

Titan

Titan TT5MTP33BP-2 Manuel utilisateur

Titan

Titan LX-70 Manuel utilisateur

Titan

Titan SF800XPL Manuel d'installation

Titan

Titan Pro V55 Manuel utilisateur

Titan

Titan TS005V2 Manuel utilisateur

Titan

Titan TTB285JSW Manuel utilisateur

Titan

Titan TTI913TOR Manuel utilisateur

Titan

Titan TTB935HTG Manuel utilisateur

Titan

Titan TTB773HTG Manuel utilisateur

Titan

Titan TTB883ROU Manuel utilisateur

Titan

Titan TTB591ROU Manuel d'installation

Titan

Titan SF1500XP Manuel d'installation

Titan

Titan SF1022 Manuel d'installation

Titan

Titan EHS Manuel utilisateur

Titan

Titan TT5MTP26-2 Manuel utilisateur

Titan

Titan TTB924DBT Manuel utilisateur

Titan

Titan TTK587GD0 Manuel d'installation

Titan

Titan TTB280DRH Manuel d'installation

Titan

Titan SF2843 Manuel d'installation

Titan

Titan TTB284HTG Manuel d'installation

Titan

Titan CAPSpray 0524000 Manuel utilisateur

Titan

Titan PR 33 Manuel utilisateur

Titan

Titan TTI882MLT Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel