Texas Instruments TMS370 Series Manuel utilisateur

TMS370 Family

EPROM/EEPROM

Programming Tool

Getting

Started Guide

1996 Microprocessor Development Systems

查询TMS370供应商捷多邦，专业PCB打样工厂，24小时加急出货

Printed in U.S.A., September 1996

M411007-9741 revision B SPNU128A

TMS370 Family

EPROM/EEPROM

Programming Tool

Getting Started Guide

SPNU128A

September 1996

BOOK BLOCKS ONLY

Printed on Recycled Paper

IMPORTANT NOTICE

Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor

product or service without notice, and advises its customers to obtain the latest version of relevant information

to verify, before placing orders, that the information being relied on is current.

TI warrants performance of its semiconductor products and related software to the specifications applicable at

the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are

utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each

device is not necessarily performed, except those mandated by government requirements.

Certain applications using semiconductor products may involve potential risks of death, personal injury, or

severe property or environmental damage (“Critical Applications”).

TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED

TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER

CRITICAL APPLICATIONS.

Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI

products in such applications requires the written approval of an appropriate TI officer. Questions concerning

potential risk applications should be directed to TI through a local SC sales office.

In order to minimize risks associated with the customer’s applications, adequate design and operating

safeguards should be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein. Nor does TI warrant or represent that any license, either

express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property

right of TI covering or relating to any combination, machine, or process in which such semiconductor products

or services might be or are used.

Chapter Title—Attribute Reference

Preface

Read This First

About This Manual

This manual helps you install the TMS370 Family EPROM/EEPROM pro-

grammer.YoucanusetheprogrammertoprogramEPROMandEEPROMde-

vices.The interface totheprogrammer issimilar tothatof theTMS370Family

Csourcedebugger.Chapter2ofthismanualdescribes the programmer inter-

face; for additional information about the interface, see the

TMS370 Family C

Source Debugger User’s Guide

Notational Conventions

This document uses the following conventions.

The TMS370 family of processors is referred to as the ’370.

Programmercommandsarenotcasesensitive;youcanentertheminlow-

ercase, uppercase, or a combination. To emphasize this fact, commands

areshown throughout thisuser’sguidein bothuppercaseand lowercase.

However, parameters for certain commands

are

case sensitive; the book

describes these instances.

In syntax descriptions, the instruction or command is in a bold face font,

and parameters are in

italics

. Portions of a syntax that are in bold face

should be entered as shown; portions of a syntax that are in

italics

describe the kind of information that should be entered. Here is an exam-

ple of a command syntax:

prog

address, length

[

, filename

]

prog is the command. This command has three parameters, indicated by

address

length

, and

filename

. The third parameter is optional.

Square brackets ( [and ]) identify an optional parameter. If you use an

optional parameter, you specify the information within the brackets; you

don’t enter the brackets themselves. Here’s an example of a command

that has an optional parameter:

ver

address, length

[

, filename

]

The VER command has three parameters; the third parameter,

filename

is optional.

Information About Cautions / Related Documentation From Texas Instruments

Information About Cautions

This book contains cautions.

This is an example of a caution statement.

A caution statement describes a situation that could potentially

damage your software or equipment.

The information in a caution is provided for your protection. Please read each

caution carefully.

Related Documentation From Texas Instruments

The following books describe the TMS370 family of devices and related sup-

porttools.ToobtainacopyofanyoftheseTIdocuments,calltheTexasInstru-

mentsLiteratureResponseCenterat(800)477–8924.Whenordering,please

identify the book by its title and literature number.

TMS370 Family C Source Debugger User’s Guide

(literature number

SPNU028) tells you how to invoke the ’370 XDS/22 emulator and ap-

plication board versions of the C source debugger interface. This book

discusses various aspects of the debugger interface, including window

management, command entry, code execution, data management, and

breakpoints,and includesatutorialthatintroducesbasicdebuggerfunc-

tionality. It also includes an advanced tutorial that introduces the break-

point, trace, and timing features.

TMS370 Family Data Manual

(literature number SPNS014) discusses hard-

ware aspects of the TMS370, such as pin functions, architecture, stack

operation, and interfaces. The manual also contains the TMS370 as-

sembly language instruction set.

TMS370 and TMS370C8 8-Bit Microcontroller Family Optimizing C Com-

piler User’s Guide

(literature number SPNU022) describes the

TMS370/C8 8-bit C compiler. This C compiler accepts ANSI standard C

source code and produces assembly language source code for the

TMS370/C8 8-bit family of devices.

TMS370 and TMS370C8 8-Bit Microcontroller Family Assembly Lan-

guageTools User’sGuide

(literaturenumberSPNU010)describes the

assembly language tools (assembler, linker, and other tools used to de-

velopassemblycode),assemblerdirectives,macros,commonobjectfile

format,andsymbolicdebuggingdirectivesfortheTMS370/C88-bitfami-

ly of devices.

If You Need Assistance

iii

Read This First

If You Need Assistance . . .

If you want to .

Contact Texas Instruments at . . .

Visit TI online World Wide Web: http://www.ti.com

Receive general information World Wide Web: http://www.ti.com/sc/docs/pic/home.htm

or assistance North America, South America: (214) 644–5580

Europe, Middle East, Africa

Dutch:

English:

French:

Italian:

German:

33–1–3070–1166

33–1–3070–1165

33–1–3070–1164

33–1–3070–1167

33–1–3070–1168

Japan (Japanese or English)

Domestic toll-free:

International: 0120–81–0026

81–3–3457–0972 or

81–3–3457–0976

Ask questions about micro-

controller product operation

or report suspected prob-

lems

Hotline:

Fax:

Email:

World Wide Web:

BBS:

(713) 274–2370

(713) 274–4203

*[email protected]

http://www.ti.com/sc/micro

(713) 274–3700 8–N–1

Request tool updates Software:

Software fax:

Hardware:

(214) 638–0333

(214) 638–7742

(713) 274–2285

Order Texas Instruments

documentation (see Note 1) Literature Response Center: (800) 477–8924

Make suggestions about or Email: [email protected]

report errors in documenta-

tion (see Note 2) Mail: Texas Instruments Incorporated

Technical Publications Manager, MS 702

P.O. Box 1443

Houston, Texas 77251–1443

Notes: 1) The literature number for the book is required; see the lower-right corner on the back cover.

2) Pleasemention thefull title of the book, the literaturenumber from the lower-right corner ofthe back cover, and the

publication date from the spine or front cover.

FCC Warning / Trademarks

FCC Warning

Thisequipmentisintendedforuseinalaboratorytestenvironmentonly.Itgen-

erates,uses,and canradiate radiofrequencyenergyand hasnot beentested

for compliance with the limits of computing devices pursuant to subpart J of

part 15 of FCC rules, which are designed to provide reasonable protection

against radio frequency interference. Operation of this equipment in other en-

vironmentsmaycause interferencewith radiocommunications,inwhich case

the user at his own expense will be required to take whatever measures may

be required to correct this interference.

Trademarks

Microsoft and Windows are registered trademarks of Microsoft Corp.

PC is a trademark of International Business Machines Corporation.

Pentium is a trademark of Intel Corporation.

Contents

1 Installing the Programming Tool With Windows 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Liststhe hardwareandsoftware necessarytoinstall theEPROM/EEPROMprogramming tool;

provides installation instructions for PC systems running Windows.

1.1 System Requirements 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hardware checklist 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Software checklist 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Step 1: Installing the Programmer Board 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Programming notes 1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Step 2: Installing the Programmer Software 1-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Creating a program group 1-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using a program-item icon 1-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Step 3: Setting Up the Programmer Environment 1-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Modifying the PATH statement 1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting up the environment variables 1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Invoking the new or modified batch file 1-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Step 4: Verifying the Installation 1-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Using the Programmer 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Describes the programmer interface and its similarities to the C source debugger interface.

2.1 Invoking the Programmer 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Descriptions of the Interface Windows and Their Contents 2-3. . . . . . . . . . . . . . . . . . . . . . .

2.3 Using the Menu Bar and the Pulldown Menus 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4 Defining a Memory Map 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.5 Programming Memory Devices 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the device name 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Verifying that the device EPROM is blank 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Transferring data into the device 2-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Verifying that the device was programmed correctly 2-11. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Uploading data from the device’s on-chip EPROM/EEPROM 2-12. . . . . . . . . . . . . . . . . . . .

2.6 Functional Summary of Programmer Commands 2-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Managing windows 2-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Displaying files, loading programs, and changing data 2-14. . . . . . . . . . . . . . . . . . . . . . . . . .

Programming memory devices 2-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Performing system tasks 2-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Memory mapping 2-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Customizing the screen 2-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Autres manuels pour TMS370 Series

Table des matières

Autres manuels Texas Instruments Microcontrôleur

Texas Instruments

Texas Instruments CC2540DK-MINI Manuel utilisateur

Texas Instruments

Texas Instruments Errata MSP430F6779 Manuel utilisateur

Texas Instruments

Texas Instruments CC2531 Manuel d'installation

Texas Instruments

Texas Instruments MSPM0L1306 Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad MSP430FR5994 Manuel utilisateur

Texas Instruments

Texas Instruments CC2540 Manuel utilisateur

Texas Instruments

Texas Instruments AFE722 Series Manuel utilisateur

Texas Instruments

Texas Instruments CC2540 Mode d’emploi

Texas Instruments

Texas Instruments MSP430F67451 Manuel utilisateur

Texas Instruments

Texas Instruments MSP432P401R Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink CC3200 Wi-Fi Manuel utilisateur

Texas Instruments

Texas Instruments bq2415 Series Manuel utilisateur

Texas Instruments

Texas Instruments CC2530-CC2592EM Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon Products CC1110DK Manuel de programmation

Texas Instruments

Texas Instruments TMS570LS0 32 Series Manuel utilisateur

Texas Instruments

Texas Instruments MSP430G2744DA Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F67471 Manuel utilisateur

Texas Instruments

Texas Instruments C2620 Manuel du produit

Texas Instruments

Texas Instruments MSP430FG6625 Manuel utilisateur

Texas Instruments

Texas Instruments Serial Programming Adapter MSP430 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F28376D Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6726 Manuel utilisateur

Texas Instruments

Texas Instruments DLP Discovery 4100 Manuel utilisateur

Texas Instruments

Texas Instruments TMS570LS31 HDK Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manuel utilisateur

Mikroe

Mikroe click Proximity 2 Manuel utilisateur