Texas Instruments Sub-1 GHz Sensor-to-Cloud Linux E14 Kit Manuel utilisateur

SWRU533–October 2017

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

Getting Started Guide

SWRU533–October 2017

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

This guide provides steps to run the out-of-box Sensor-to-Cloud example. This kit allows you to view and

control sensors on a Sub-1 GHz network from the cloud. All the devices in the kit are preprogrammed with

required software. The kit includes two methods of operation: a cloud-connected gateway and a local

gateway. The cloud-connected gateway lets you leverage cloud services such as Amazon Web

Services™ (AWS) and IBM Watson®Internet of Things (IoT). The local gateway lets you run a gateway

within a local IP network for privately managed networks that do not require external connectivity. It is

important to note that the design lets you quickly add any desired cloud service.

Kit Contents

• 5-V Power Supply

•BeagleBone Black

•BeagleBone Wireless Connectivity Cape

• FTDI Cable

• Preflashed MicroSD

• 2× TI SimpleLink™ CC1350 LaunchPad™

• 2× Micro-USB Type B Cable

Contents

1 Hardware Setup.............................................................................................................. 2

2 Running the Demo........................................................................................................... 2

3 Running Local Gateway..................................................................................................... 4

4 Running Cloud Gateway.................................................................................................... 5

5 Using Amazon Web Services (AWS) ..................................................................................... 7

6 Using IBM Quickstart........................................................................................................ 9

7 Using IBM Cloud Service.................................................................................................. 10

7.1 Download and Install Cloud Foundry CLI...................................................................... 10

7.2 Open IBM Bluemix Account...................................................................................... 10

7.3 Create a Service................................................................................................... 11

7.4 Upload the Provided Cloud Foundry Application.............................................................. 15

7.5 Launching the Demo.............................................................................................. 17

8 Troubleshooting ............................................................................................................ 19

8.1 Sensor Will Not Join the Network............................................................................... 19

8.2 How to Determine if the Sensor is Connected to a Network ................................................ 20

8.3 BeagleBone Black Will Not Connect to a Cloud Service..................................................... 20

8.4 Local Gateway Fails to Start..................................................................................... 20

9 Next Steps................................................................................................................... 21

9.1 Get More Details on the Software Design ..................................................................... 21

9.2 Sensor Examples.................................................................................................. 21

9.3 SimpleLink™ Sub-1 GHz Embedded Sensor-to-Cloud Gateway........................................... 21

9.4 Support ............................................................................................................. 21

USB connecting BBB &

LaunchPad

5 V Power Supply BBB + WiFi

Connectivity Cape

Hardware Setup

www.ti.com

2SWRU533–October 2017

Submit Documentation Feedback

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

Trademarks

SimpleLink, LaunchPad, Sitara, E2E are trademarks of Texas Instruments.

Amazon Web Services is a trademark of Amazon Web Services, Inc.

IBM Watson is a registered trademark of IBM Corporation.

Bluemix is a registered trademark of IBM.

Linux is a registered trademark of Linus Torvalds.

Wi-Fi is a registered trademark of Wi-Fi Alliance.

All other trademarks are the property of their respective owners.

1 Hardware Setup

The BeagleBone Black (BBB) comes equipped with a BeagleBone Wireless Connectivity Cape and a

preinserted microSD card with necessary software. Connect the BBB to the CC1350 LaunchPad labeled

MAC co-processor as shown in Figure 1. Connect the 5-V power supply to the BBB and an electrical

outlet. The CC1350 LaunchPad labeled Sensor in Figure 1 should be connected to any USB power

source using the provided USB cable.

Figure 1. Sensor-to-Cloud Hardware Setup

2 Running the Demo

The BBB operates out of the box as a Wi-Fi®access point with SSID: SitaraAP. Connect to the network

with a PC by using the password: sensor-to-cloud. Once connected, open a browser and type in the

address bar: http://192.168.43.1:1310. This opens the Sensor-to-Cloud welcome page hosted on the BBB

(see Figure 2).

www.ti.com

Running the Demo

SWRU533–October 2017

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

Figure 2. Sensor-to-Cloud Welcome Page

Select the method of operation for the demo:

• Cloud Gateway (see Section 3)

The Cloud Gateway allows you to monitor and control the Sub-1 GHz network using AWS or IBM

Cloud Service. The IBM Quickstart method is easy and requires no setup, while other methods require

additional steps.

• Local Gateway (see Section 8)

The Local Gateway is the best method to start with. This method allows you to monitor and control the

Sub-1 GHz network using a local IP network for privately managed networks that do not need external

connectivity.

Figure 3. Sensor-to-Cloud Main Portal

Running Local Gateway

www.ti.com

4SWRU533–October 2017

Submit Documentation Feedback

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

3 Running Local Gateway

Clicking Local Gateway automatically redirects to the TI 15.4-Stack Example Application - Collector

Application after a short delay (see Figure 4).

Figure 4. Selecting Local Gateway

1. Select open to allow the sensor to join the network.

2. Power on the sensor, if not done so already. The sensor will automatically join the network.

NOTE: If the sensor does not connect automatically, see Section 8.1.

Figure 5. TI 15.4-Stack Linux Gateway Example Application

www.ti.com

Running Cloud Gateway

SWRU533–October 2017

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

3. The sensor is now reporting data to the Sub-1 GHz gateway and allows you to control and visualize

data on a local cloud platform. Use the Red LED option to control the red LED on the CC1350

LaunchPad labeled Sensor.

NOTE: There may be a few seconds of delay with the Toggle command.

4 Running Cloud Gateway

To run a Cloud Gateway, the BBB must be connected to the Internet.

1. Click Cloud Gateway.

2. The BBB can be connected through ethernet or Wi-Fi.

a. If you are using a Wi-Fi connection, skip to Step 3.

b. For ethernet connections, attach an ethernet cable to the ethernet port on the BBB. You should

see Ethernet in the Network Connection Status as seen in Figure 6. Next, skip to Step 4.

Figure 6. BBB Ethernet Connection

Running Cloud Gateway

www.ti.com

6SWRU533–October 2017

Submit Documentation Feedback

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

3. To begin a 10-second network scan, select the drop-down menu adjacent to the SSID labeled Click

here to scan for available networks. Select from the list of available networks and provide the

Network Key. Selecting Remember Network causes the BBB to automatically connect to the selected

network when possible. This is true even after the device has been reset.

Figure 7. Internet Connection Configuration

4. After successfully connecting to the Internet, select the desired cloud service (see Figure 8). The Local

Gateway option may be selected even though it does not require an Internet connection. Amazon Web

Services is provided through stackArmor.

Figure 8. Cloud Service Selections

www.ti.com

Using Amazon Web Services (AWS)

SWRU533–October 2017

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

5 Using Amazon Web Services (AWS)

Use the following steps for Amazon Web Services:

1. Section 2 and Section 3 should be followed before continuing here (see Section 2 and Section 3,

respectively).

2. Request credentials from stackArmor.

If approved, stackArmor will provide the security credentials necessary for the steps that follow.

3. Use Choose File to select the security credentials received from stackArmor.

4. Click Submit to upload the selected files.

Figure 9. Uploading Security Credentials

5. After uploading the security files, select Start AWS Gateway. You will be prompted to enter the

username and password provided through email from stackArmor.

Using Amazon Web Services (AWS)

www.ti.com

8SWRU533–October 2017

Submit Documentation Feedback

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

6. You will automatically be redirected to the AWS IoT Dashboard through stackArmor, as shown in

Figure 10.

Figure 10. Internet-of-Things (IoT) Dashboard

6. Power-on the sensor, if this is not already done. The sensor automatically joins the network and

appears in the Network Chart and Sensor Nodes table, as shown in Figure 10.

NOTE: If sensor does not connect automatically, see Section 8.1.

7. The sensor is now reporting data to the Sub-1 GHz gateway and allows you to control and visualize

data through AWS. Use the Toggle option to control the red LED on the CC1350 LaunchPad labeled

Sensor.

NOTE: There may be a few seconds of delay with the Toggle command.

www.ti.com

Using IBM Quickstart

SWRU533–October 2017

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

6 Using IBM Quickstart

Section 2 and Section 3 should be followed before continuing here (see Section 2 and Section 3,

respectively).

Selecting IBM Quickstart launches the IBM Watson IoT Platform.

NOTE: Currently, IBM Quickstart does not support a way to send commands from the cloud to the

Sub-1 GHz gateway.

Figure 11. IBM Quickstart

1. Power on the sensor, if not done so already. The platform automatically detects the sensor, and the

web page updates with a list of sensor data.

NOTE: If sensor does not connect automatically, see Section 8.1.

2. From the list of sensor data, select a sensor data point to see its value graphed. In Figure 12,

smart_objects.temperature.0.sensorValue is selected.

Figure 12. IBM Quickstart Graph

3. The sensor is now reporting data to the Sub-1 GHz gateway and allows you to visualize data through

IBM Quickstart.

Using IBM Cloud Service

www.ti.com

10 SWRU533–October 2017

Submit Documentation Feedback

Sub-1 GHz Sensor-to-Cloud Linux®E14 Kit

7 Using IBM Cloud Service

7.1 Download and Install Cloud Foundry CLI

Use the steps that follow to install the Cloud Foundry CLI tool on your PC.

1. On your PC, download and install the program from Cloud Foundry CLI.

2. Verify installation by typing the command cf on the command line terminal. You should see output

similar to that shown in Figure 13.

Figure 13. S2C IBM cfTool

7.2 Open IBM Bluemix Account

If you do not have an IBM Bluemix®account, you must open one and use the steps that follow.

1. Create an IBM Bluemix account and register for a 30-day trial account.

2. Confirm the Bluemix account using the link provided by IBM through email.

3. Log into the Bluemix account page that is shown in Figure 14.

Figure 14. Sensor-to-Cloud IBM Bluemix

Table des matières

Autres manuels Texas Instruments Matériel informatique

Texas Instruments

Texas Instruments TMS320VC5509 Guide d'installation et d'utilisation

Texas Instruments

Texas Instruments TPA6138A2 EVM Manuel utilisateur

Texas Instruments

Texas Instruments TMDSCNCD2800157 Manuel technique

Texas Instruments

Texas Instruments BoosterPack BOOSTXL-ADS7142-Q1 Manuel utilisateur

Texas Instruments

Texas Instruments TIDA-070005 Mode d’emploi

Texas Instruments

Texas Instruments bq20z60EVM-001 Manuel utilisateur

Texas Instruments

Texas Instruments TUSB522P Manuel utilisateur

Texas Instruments

Texas Instruments XDS522 Manuel utilisateur

Texas Instruments

Texas Instruments AM57 Series Manuel utilisateur

Texas Instruments

Texas Instruments PGA309EVM Manuel utilisateur

Texas Instruments

Texas Instruments TMS320DM355 Manuel utilisateur

Texas Instruments

Texas Instruments C28 Series Manuel utilisateur

Texas Instruments

Texas Instruments F280025 Manuel utilisateur

Texas Instruments

Texas Instruments MSP-EXP430F5438 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320TCI6482 Mode d’emploi

Texas Instruments

Texas Instruments MSP430F51 Manuel utilisateur

Texas Instruments

Texas Instruments TS3USB3031 Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink CC3301 Manuel utilisateur

Texas Instruments

Texas Instruments TSC2007EVM Manuel utilisateur

Texas Instruments

Texas Instruments CC3100 SimpleLink Manuel utilisateur

Texas Instruments

Texas Instruments TMS320*2801 Series Manuel utilisateur

Texas Instruments

Texas Instruments AM62A7 Mode d’emploi

Texas Instruments

Texas Instruments ADS125H02 Manuel utilisateur

Texas Instruments

Texas Instruments System-Side Impedance Track bq27500 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur