Tektronix TDS3TMT Manuel utilisateur

User Manual

TDS3TMT

Telecom Mask Test

Application Module

071-0648-02

*P071064802*

071064802

products are owned by Tektronix or its subsidiaries or suppliers,

and are protected by national copyright laws and international

treaty provisions.

Tektronix products are covered by U.S. and foreign patents,

issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and

price change privileges reserved.

TEKTRONIX, TEK, TEKPROBE, and TekSecure are registered

trademarks of Tektronix, Inc.

DPX, WaveAlert, and e*Scope are trademarks of

Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

HIn North America, call 1-800-833-9200.

HWorldwide, visit www.tektronix.com to find contacts in

your area.

Contents

Safety Summary 2.............................

Installing the TDS3TMT Application Module 5........

Telecom Mask Test Features 5...................

Accessing TDS3TMT: QuickMenu 6................

Accessing TDS3TMT: Utility Menu 7...............

Conventions 8...............................

TDS3TMT Menu 9.............................

Telecom Pass/Fail Mask Test Example 24............

Safety Summary

To avoid potential hazards, use this product only as

specified. While using this product, you may need to

access other parts of the system. Read the General Safety

Summary in other system manuals for warnings and

cautions related to operating the system.

Preventing Electrostatic Damage

CAUTION. Electrostatic discharge (ESD) can

damage components in the oscilloscope and its

accessories. To prevent ESD, observe these

precautions when directed to do so.

Use a Ground Strap. Wear a grounded antistatic wrist strap

to discharge the static voltage from your body while

installing or removing sensitive components.

UseaSafeWorkArea.Do not use any devices capable of

generating or holding a static charge in the work area

where you install or remove sensitive components.

Avoid handling sensitive components in areas that have a

floor or benchtop surface capable of generating a static

charge.

Handle Components Carefully. Do not slide sensitive

components over any surface. Do not touch exposed

connector pins. Handle sensitive components as little as

possible.

Transport and Store Carefully. Transport and store sensitive

components in a static-protected bag or container.

Manual Storage

The oscilloscope front cover has a convenient place to

store this manual.

Installing the TDS3TMT Application Module

Refer to the TDS3000, TDS3000B, and TDS3000C

Series Application Module Installation manual for

instructions on installing and testing the application

module.

Telecom Mask Test Features

The TDS3TMT application module adds waveform

mask testing capabilities to your oscilloscope. This

section provides an overview of these additional features.

Telecom Mask Test QuickMenu

Use the telecom mask test QuickMenu function to

display bottom and side menus that provide access to all

key mask test functions from one screen.

Predefined Telecom Industry Masks

The TDS3TMT application module provides compliance

masks for testing to ITU-G.703 and ANSI T1.102

telecommunications standards, up to STS-1 (52 Mb/s)

line rates.

Multiple Channel Testing

The TDS3TMT application module enables you to

perform multiple simultaneous testing on all active

oscilloscope channels.

Test Automation

You can connect the oscilloscope to do automated mask

testing by using the RS--232, GPIB, or LAN commu-

nication ports.

Accessing TDS3TMT: QuickMenu

1. Push the QuickMenu front-panel button to display

the quick menu items.

2. Push the Menu bottom screen button to select and

display the Telecom bottom and side menu items.

3. Push bottom and side menu buttons to select a mask,

set test control parameters, and test pass/fail

responses.

Accessing TDS3TMT: Utility Menu

1. Push the UTILITY front-panel button to display the

utility menu items.

2. Push the System bottom screen button to display

Apps.

3. Push the Module bottom screen button to select

Telecom. The screen displays the telecom bottom and

side menu items.

4. Push bottom and side menu buttons to select a mask,

set test control parameters, and test pass/fail

responses.

Conventions

The following conventions apply to all TDS3TMT

functions:

HYou can perform multiple waveform mask testing by

connecting signals to all oscilloscope input channels.

HWhile in Telecom Mask test mode, the AUTOSET

front-panel button automatically sets the oscilloscope

horizontal, vertical, and trigger parameters, and

positions the waveform in the selected mask.

HMask testing only works with live channels. It is

recommended that you turn off math and reference

waveforms while doing mask testing.

Table des matières

Autres manuels Tektronix Unité de contrôle

Tektronix

Tektronix 73A-270 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 7710 Manuel utilisateur

Tektronix

Tektronix 80A02 Manuel utilisateur

Tektronix

Tektronix DPO3PWR Manuel utilisateur

Tektronix

Tektronix VX4790A Manuel utilisateur

Tektronix

Tektronix 80E07 Manuel utilisateur

Tektronix

Tektronix VX4521 Manuel utilisateur

Tektronix

Tektronix 3B5 Manuel utilisateur

Tektronix

Tektronix 80A01 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 4225-RPM Manuel utilisateur

Tektronix

Tektronix TLA7B Series Manuel utilisateur

Tektronix

Tektronix TM 506A Manuel utilisateur

Tektronix

Tektronix 73A-851 Manuel utilisateur

Tektronix

Tektronix TM 503 Manuel utilisateur

Tektronix

Tektronix TM 515 Manuel utilisateur

Tektronix

Tektronix TM 502A Manuel utilisateur

Tektronix

Tektronix ECO422D Manuel d'utilisation et d'entretien

Tektronix

Tektronix TM 5006 Manuel utilisateur

Tektronix

Tektronix TDS3TRG Manuel utilisateur

Tektronix

Tektronix TM 501 Manuel utilisateur

Tektronix

Tektronix VX4730 Manuel utilisateur

Tektronix

Tektronix VX4240 Manuel utilisateur

Tektronix

Tektronix TM 506 Manuel utilisateur

Tektronix

Tektronix ECO170A Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur