Synology VS80 Manuel utilisateur
VS80 User’s Guide
Firmware version 1.3-0303
VS8001042011
Table of Contents
TOC
2
3 Chapter 1: Getting Started with VS80
4 Package Contents
5 Software Specications
5 Operating Requirements
6 Appearance
7 LED Behavior
7 Safety Instructions
8 Hardware Setup
8 Chapter 2: Using VS80
10 Enabling VS80 on your Synology DiskStation
11 Live-view
11 More Functions
12 Snapshot
12 Start PTZ
13 Event Playback
15 Switch Resolution
15 Firmware Upgrade
17 Chapter 3: Troubleshooting
CHAPTER
1
3
Congratulations on your purchase of Synology VS80. It is designed to expand the
exibility of your Surveillance Station.
By connecting VS80 to an video output device, like a LCD or a TV, for example,
users can directly have live-view of their IP camera set up on their Synology
DiskStation, or play the recordings stored on it, all without a PC. If they have
multiple cameras, VS80 even provides live-view of multiple cameras as a video
wall system.
This user’s guide will assist you through the installation and usage of your VS80.
Before going further, please conrm that you have at least one IP camera
managed by your Synology DiskStation. For information on how to set up an
IP camera on your Synology DiskStation, please check the user's guide of your
Synology DiskStation.
Getting Started with VS80
USB Flash
Mouse
Serveillance Station
VS80
VGA
DiskStation
USB
Network
4 Chapter 1: Getting Started with VS80
Package Contents
Before installation, please check the package contents to verify that you have
received the items below.
Main Unit AC power adapter
2M RJ-45 LAN cable
User's Guide
Hardware Specications
USB 1 port in front, 1 port in rear
(For USB disk and mouse)
Video Output VGA x 1
Audio Output 3.5mm Stereo Audio Jack x 1
Size (HxWxD) (mm) 160x63x218 mm
Weight 0.78Kg
LAN 10/100BaseT
AC Input Power Voltage 100V to 240V AC
Power Frequency 50 / 60Hz, Single Phase
Operating Temperature 5°C ~ 35°C (40°F ~ 95°F)
Storage Temperature -10°C ~ 70°C (15°F ~ 155°F)
Relative Humidity 5% to 95% RH
Maximum Operating Altitude 10,000 feet
Certication FCC Class B, CE Class B
Chapter 1: Getting Started with VS80 5
Software Specications
Channel # 4, 6 or 9
Display Mode 2x2, 3x2 or 3x3 panels
Compression Formats MJPEG, MPEG-4, H.264
Decoding Throughput [MJPEG] MJPEG:
4,6 channel: 80 FPS, D1
9 channel: 80 FPS, CIF
Decoding Throughput [MPEG4] MPEG4:
4,6 channel: 80 FPS, D1
9 channel: 80 FPS, CIF
Decoding Throughput [H.264] H.264:
4,6 channel: 60 FPS, D1
9 channel: 80 FPS, CIF
Maximum Camera Resolution 4,6 channel D1: (640x480 in VGA, 720x480 in
NTSC, 720x576 in PAL)
9 channel CIF: (320x240 in VGA, 352x240 in
NTSC, 352x288 in PAL)
Snapshot Yes (save to USB disk)
PTZ Yes (for PTZ cameras only)
Playback Event Timeline
Firmware Upgrade Yes (via USB disk)
Resolution 1280x768, 1024x768, 800x600
Operating Requirements
Synology DiskStation Recommend DSM 3.1 and onwards to support
full features of VS80.
Supported IP cameras For the complete list of supported IP cameras,
please visit http://www.synology.com
6 Chapter 1: Getting Started with VS80
Front View Rear View
LED indicators
USB 2.0 port
LOCK button
POWER button
VGA port
AUDIO jack
USB 2.0 port
LAN port
RESET button
DC IN 5V port
Article Name Location Description
POWER button Front The POWER button is used to turn the Synology VS80 on or off.
LOCK button Front The LOCK button is used to prevent VS80 from paring with
other Synology DiskStations.
LED Indicator Front
The LED Indicators are used to display the status of the
system, network connection, and Lock function. For complete
details, please refer to the LED Behavior table below.
USB port Front &
Rear
The Synology VS80 offers 2 USB ports for both mouse plug-in
and USB ash drive connection*. One of the ports is located
on the front and the other on the rear.
VGA port Rear To connect the monitor’s VGA adapter to VS80.
AUDIO jack Rear The AUDIO jack is used to connect external speakers or
earphone to VS80 (for audio supported cameras).
LAN port Rear The LAN port is used to connect the LAN cable to VS80.
RESET button Rear The RESET button is used to restore the settings to the factory
default.
DC IN 5V port Rear The DC IN 5V port is used to connect the AC Power Adapter to
provide power to your Synology VS80.
Appearance
Chapter 1: Getting Started with VS80 7
LED Behavior
LED Behavior Description
POWER
Solid Blue System is ready
Flashing Blue System is starting up
Off The power is off
STATUS Solid Green Server is connected
Off Server is not connected
LAN Solid Green LAN is connected
Flashing Green LAN is active
LOCK
Solid Green Locked (Pairing is not allowed with Synology DiskStation)
Flashing Green Unlocked (Pairing is allowed with Synology DiskStation)
RESERVE Off No functionality (Reserved for future use)
Safety Instructions
To use your Synology product safely, please follow these instructions and warnings
at all time.
Keep away from direct sunlight and away from chemicals. Make sure
the environment does not experience abrupt changes in temperature
or humidity.
Keep Synology product upright. Do not lay it down horizontally.
Do not place the Synology product close to any liquid.
Before cleaning, unplug the power cord rst. Wipe Synology product
with damp paper towels. Do not use chemical or aerosol cleaners to
clean it.
Do not place the Synology product on a cart, table, or desk, which is
not stable to avoid the product from falling over.
The power cord must plug in to the right supply voltage. Make sure
that the supplied AC voltage is correct and stable.
2
8
Using VS80
Hardware Setup
1 Connect the AC power adapter to VS80, and the other end to the power outlet.
2 Use the LAN cable to connect VS80 to your switch/router/hub.
Chapter 2: Using VS80 9
3 Connect your monitor's VGA cable to the VGA port on the back of VS80.
4 Connect the mouse to the USB port on the back of VS80.
5 Push the Power button on the front of your VS80. Your VS80 is now online and
ready to work with your DiskStation.
10 Chapter 2: Using VS80
Enabling VS80 on your Synology DiskStation
Before you start, make sure the DSM version of your DiskStation is 3.1 or later
to support the full features of VS80. You can view your current DSM version by
going to Control Panel > DSM Update.
To update DSM, please visit: http://www.synology.com/support
To Enable VS80 on your Surveillance Station:
1 Enter Surveillance Station.
2 Click on the Management tab at the top.
3 Select Advanced option under System category.
4 Enable VS80 by checking Enable VisualStation checkbox.
5 Click on Save to save the changes. After conguration, VisualStation will
appear under the Management tab.
Table des matières
Autres manuels Synology Stockage
Synology
Synology DS414slim Manuel utilisateur
Synology
Synology DS1823XS+ Manuel utilisateur
Synology
Synology DiskStation DS1517+ Manuel
Synology
Synology DS509+ Manuel utilisateur
Synology
Synology DS120j Manuel
Synology
Synology DS923+ Manuel utilisateur
Synology
Synology DiskStation DS213+ Manuel utilisateur
Synology
Synology RackStation RS2423RP+ Manuel utilisateur
Synology
Synology DiskStation DS418 Manuel
Synology
Synology DiskStation DS418j Manuel
Synology
Synology DiskStation DS718+ Manuel
Synology
Synology TC500 Manuel utilisateur
Synology
Synology DS1621xs+ Manuel
Synology
Synology CS-406 Manuel utilisateur
Synology
Synology DiskStation DS415+ Manuel utilisateur
Synology
Synology DiskStation DS918+ Manuel
Synology
Synology DiskStation DS418 16TB-IW Manuel
Synology
Synology Disk Station DS1010+ Manuel utilisateur
Synology
Synology DiskStation DS411slim Manuel utilisateur
Synology
Synology DS207 Series Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur