Synology DiskStation DS1522+ Manuel
Synology NAS DS1522+
Hardware Installation Guide
Table of Contents
Chapter 1: Before You Start
Package Contents 3
Synology DS1522+ at a Glance 4
System Modes and LED Indicators 5
Other LED Indicators 7
Hardware Specication 8
Spare Parts 9
Optional Accessories 9
Safety Instructions 10
Chapter 2: Hardware Setup
Tools and Parts for Component Installation 11
Install Drives 11
Start up Your Synology NAS 13
Add a Memory Module to Synology NAS 14
Add an M.2 NVMe SSD to Synology NAS 16
Install Network Upgrade Module 17
Chapter 3: Install DSM on Synology NAS
Install DSM with Web Assistant 18
Learn More 18
Synology_HIG_DS1522+_20220124
2
3
Thank you for purchasing this Synology product! Before setting up your new Synology NAS, please check the
package contents to verify that you have received the items below. Also, make sure to read the safety instructions
carefully to avoid harming yourself or damaging your Synology NAS.
Note: All images below are for illustrative purposes only, and may dier from the actual product.
Package Contents
Main unit x 1 AC power cord x 1
AC power adapter x 1
Screws for 2.5" drives x 24 Hard drive tray key x 2 RJ-45 LAN cable x 2
Before You Start 1
Chapter
4Chapter 1: Before You Start
Synology DS1522+ at a Glance
No. Article Name Location Description
1 STATUS Indicator
Front
Displays the status of the system. For more information, see
"System Modes and LED Indicators".
2 Drive Status Indicator Displays the status of drive. For more information, see "Other
LED Indicators".
3 Drive Tray Lock Lock or unlock drive trays.
4 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Synology
NAS here.
5 Power Button and
Indicator
1. Press to power on your Synology NAS.
2. To power o the Synology NAS, press and hold until you
hear a beep sound and the Power LED starts blinking.
6 Drive Tray Install drives (hard disk drives or solid state drives) here.
7 eSATA Port
Rear
Connect Synology Expansion Unit1to the Synology NAS here.
8 Power Port Connect power cord here.
9 Network Upgrade Slot Supports the addition of E10G22-T1-Mini network upgrade
module.
10 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Synology
NAS here.
11 LAN Port Connect network cable here.
12 RESET Button
1. Mode 1: Press and hold until you hear a beep sound to
restore the IP address, DNS server, and password for the
admin account to default.
2. Mode 2: Press and hold until you hear a beep, release
the button immediately, then press and hold again until
you hear three beeps to return the Synology NAS to "Not
Installed" status so that DiskStation Manager (DSM) can be
reinstalled.
For detailed information on how to reset your Synology NAS,
please refer to this article.
13 Fan Disposes of excess heat and cools the system. If the fan
malfunctions, the Synology NAS will emit a beeping sound.
14 Kensington Security Slot Attach a Kensington security lock here.
1For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com.
5Chapter 1: Before You Start
System Modes and LED Indicators
System Modes and Denitions
There are 7 system modes in Synology NAS. The System modes and their denitions are as below:
System mode Denition
Powering on
Synology NAS is powering on when you press the power button or restarting when
you run operations in DSM. During the boot up process, the device also performs
hardware initialization, such as hardware reset or BIOS initialization.
Shutting down Synology NAS is shutting down as a result of pressing the power button or operation
in DSM.
DSM not ready
DSM is not ready for use. This could either be:
• Synology NAS is powered on, but DSM is not properly installed.
• Synology NAS is currently powering on and initializing services necessary for
DSM to fully function.
• The attached UPS device has insucient power; DSM stops all services to
prevent data loss (enters safe mode).
DSM is ready for use DSM is fully functioning and users can sign in.
Hibernation Synology NAS has been idle for a while and is now in Hibernation mode.
Application
Certain packages/services (e.g., USB Copy and Find me service) while in operation
will control the actions of the LED. After the operation is complete, the LED indicator
will return to its normal state.
Powered o Synology NAS is powered o.
Identify System Modes
You can identify the system mode through the POWER and STATUS LED indicators. Please refer to below table
for more details.
System mode
LED Indicator
POWER STATUS
Blue Green Orange
Powering on Blinking O O
Shutting down Blinking Static O/Static1
DSM not ready Static Blinking O/Blinking1
DSM is ready for use Static Static O/Static1
Hibernation Static O O/Static1
Application Static Switching
Powered o O O O
Note:
1 If the STATUS LED remains static orange or continuously blinks orange, this indicates there are system
errors such as fan failure, system overheating, or volume degrade. Please sign in to DSM for detailed
information.
6Chapter 1: Before You Start
Transitions between System Modes
To better understand the transition between system modes, please refer to below examples:
• Powered on with no DSM installed:
Powered o > Powering on > DSM not ready
• Powered on with DSM installed:
Powered o > Powering on > DSM not ready > DSM is ready for use
• Enter hibernation then wake up from hibernation:
DSM is ready for use > Hibernation > DSM is ready for use
• Shutdown Synology NAS:
DSM is ready for use > Shutting down > Powered o
• Power failure with UPS attached:
DSM is ready for use > DSM not ready (due to power failure, DSM enters safe mode) > Shutting down >
Powered o > Powering on (power has recovered, DSM will reboot) > DSM not ready > DSM is ready for use
7Chapter 1: Before You Start
Other LED Indicators
LED Indicator Color Status Description
DRIVE status
Green
Static Drive ready and idle
Blinking Accessing drive
Orange Static
Locating drive
Drive deactivated by user
Port disabled1
Drive health status is Critical or Failing
Removing this drive will cause system
damage; this is the only drive with DSM
installed.
O No internal drive
Rear LAN
(on left side of jack)
Green
Static Network connected
Blinking Network active
O No network
Rear LAN
(on right side of jack)
Green Static 1 Gbps connection
Orange Static 100 Mbps connection
O 10 Mbps connection/No network
Note:
1 When the drive LED indicator is red/orange, we recommend you sign in to DSM and go to Storage Manager
> HDD/SSD for more information.
2 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's
diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in
S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical
Support for help.
8Chapter 1: Before You Start
Hardware Specication
Item DS1522+
CPU AMD Ryzen R1600
RAM DDR4 8G
Compatible Drive Type • 3.5"/2.5" SATA x 5
• M.2 2280 NVMe SSD x 2
External Port • USB 3.2 Gen 1 x 2
• eSATA x 2
LAN Port 1GbE (RJ-45) x 4
Network Upgrade Slot Gen3 x2 slot (x2 link) x 1
Size (H x W x D) (mm) 166 x 230 x 223
Weight (kg) 2.7
Agency Certication • FCC Class B • CE Class B • UKCA • BSMI Class B
• EAC • VCCI • CCC • RCM • KC • RoHS Compliant
HDD Hibernation Yes
Scheduled Power On/O Yes
Wake on LAN Yes
Environment Requirement
• Line voltage: 100V to 240V AC
• Frequency: 50 / 60Hz
• Operating Temperature: 32 to 104˚F (0 to 40˚C)
• Storage Temperature: -5 to 140˚F (-20 to 60˚C)
• Relative Humidity: 5% to 95% RH
Note: Model specications are subject to change without notice. Please refer to www.synology.com for the latest information.
9Chapter 1: Before You Start
Spare Parts
Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply
units.
Model Name Picture Description
Disk Tray (Type D9) 3.5"/2.5" HDD Tray With Lock
Fan 92*92*25_1 System Fan 92*92*25 mm
Adapter 120W_1 Adapter 120W Level VI
Optional Accessories
With Synology accessories, you can customize your Synology NAS to t dierent business environments without
worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.
10 Chapter 1: Before You Start
Safety Instructions
Keep away from direct sunlight and away from chemicals. Ensure a stable environment
with no abrupt changes in temperature or humidity.
Place the unit right side up at all times.
Keep the unit away from liquids.
Before cleaning, unplug the power cord. Do not use chemical or aerosol cleaners. Wipe
with damp paper towels.
To prevent the unit from falling over, do not place it on carts or any unstable surfaces.
The power cord must plug into the correct supply voltage. Ensure the supplied AC voltage
is correct and stable.
Warning, electric shock hazard. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
appropriately.
Power cord must be plugged into a socket-outlet with earthing connection.
Keep body parts away from moving fan.
This product must be installed by qualied personnel in a restricted access location (like
dedicated equipment rooms, service closets).
Table des matières
Autres manuels Synology Stockage
Synology
Synology DiskStation DS916+ Manuel utilisateur
Synology
Synology DX513 Manuel utilisateur
Synology
Synology DiskStation DS3612xs Manuel utilisateur
Synology
Synology DiskStation DS1817 Manuel
Synology
Synology DiskStation DS214se Manuel utilisateur
Synology
Synology DiskStation DS209 Manuel utilisateur
Synology
Synology SA3610 Manuel utilisateur
Synology
Synology RackStation RS815 Manuel utilisateur
Synology
Synology DS1621+ Manuel
Synology
Synology DS223 Manuel utilisateur
Synology
Synology DiskStation DS214 Manuel utilisateur
Synology
Synology DS720+ Manuel
Synology
Synology DiskStation DS423 Manuel utilisateur
Synology
Synology DiskStation DS410j Manuel utilisateur
Synology
Synology DiskStation DS218 Manuel
Synology
Synology DS509+ Manuel utilisateur
Synology
Synology RS2821RP+ Manuel
Synology
Synology DS-106 Series Manuel utilisateur
Synology
Synology SA3600 Manuel
Synology
Synology DS1821+ Manuel
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur