Symbol LS1902-T Manuel du propriétaire

BARCODE SCANNER

Programming the LS1902-T & LS2208 for use with

StarShip

These instructions are for the Symbol LS1902-T & LS2208 Barcode scanner

ONLY!

The following instructions will allow the user to scan a bar-coded

Invoice\Order number into Starship and automatically “press” the Enter key.

Repetitive keystrokes such as SAVE, DEFER, REPEAT, and NEXT can

also be programmed. These repetitive keystrokes can be scanned using the

preprinted Barcodes at the end of these instructions.

You must tell the scanner what kind of keyboard connection you are using

by scanning the appropriate Barcode on the following page. Connect the

scanner to the PC and Keyboard while the PC is on (see page 1-6 of the

Online Manual for connection instructions). IMPORTANT: The keyboard

will be disabled until you scan one of the Barcodes on the next page.

The “ENTER” command must be programmed before any of the other

commands are entered. To program a command, “scan” each barcode in

order on that page. If you do not hear a beep or series of beeps, the scanner

did not read the barcode. Try scanning the barcode at different angles until

you hear the beep(s). If you make a mistake, scan the last barcode on that

page and start at the beginning of that page again. To reset the scanner back

to Factory Defaults scan this barcode:

“ENTER” Command

Scan these barcodes FIRST in order 1 through 10. If you make a mistake

just scan number 10 and start over at number 1. This command allows you to

scan an Invoice/Order number with an “Enter” command at the end.

IMPORTANT: Do not program an “Enter” command into your

Invoice\Order number Barcode.

SAVE

Scan these barcodes in order 1 through 11. If you make a mistake, scan the

last barcode and start again. The “SAVE” Barcode allows you to scan the

“SAVE” command in without using the keyboard or mouse. The “SAVE”

barcode can be found at the end of these instructions and should be posted in

a convenient place

DEFER

Scan these barcodes in order 1 through 12. If you make a mistake, scan the

last barcode and start again. The “DEFER” Barcode allows you to scan the

Defer command without using the keyboard or mouse. The “DEFER”

Barcode can be found on the last page of these instructions.

NEXT

Scan these barcodes in order 1 through 12. If you make a mistake, scan the

last barcode and start again. The “NEXT” Barcode allows you to enter

multiple packages without clicking on the Next button in Starship. The

“NEXT” Barcode can be found on the last page of these instructions.

REPEAT

13)

Scan these barcodes in order 1 through 13. If you make a mistake, scan the

last barcode and start over. The “REPEAT” barcode allows you to repeat the

package “x” amount of times (x being the number of packages) The

“REPEAT” barcode can be found on the last page of these instructions.

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Symbol Lecteur de codes-barres

Symbol

Symbol LS3408-FZ20005 Manuel utilisateur

Symbol

Symbol LS 6004 Mode d'emploi

Symbol

Symbol LS3008 Manuel utilisateur

Symbol

Symbol CS4070 Manuel d'installation et d'exploitation

Symbol

Symbol LS 9100 Manuel d'installation et d'exploitation

Symbol

Symbol Symbol DS6708 Manuel utilisateur

Symbol

Symbol DS3478 Manuel d'installation et d'exploitation

Symbol

Symbol LS3578 Manuel d'installation et d'exploitation

Symbol

Symbol SE955 Guide de configuration rapide

Symbol

Symbol DS3408-SF20005R Manuel utilisateur

Symbol

Symbol LS 4208 Manuel utilisateur

Symbol

Symbol LS4278 Manuel utilisateur

Symbol

Symbol LS 4008i Manuel d'installation et d'exploitation

Symbol

Symbol LS 9208 Manuel

Symbol

Symbol Symbol LS9208i Manuel utilisateur

Symbol

Symbol LS1900 Series Manuel d'installation et d'exploitation

Symbol

Symbol Symbol LS3478-FZ Manuel utilisateur

Symbol

Symbol LS1900 Series Manuel utilisateur

Symbol

Symbol Phaser P460 Manuel utilisateur

Symbol

Symbol LS 3020 Mode d'emploi

Symbol

Symbol LS 6800 Manuel utilisateur

Symbol

Symbol DS3578 Manuel utilisateur

Symbol

Symbol LT 1800 Manuel utilisateur

Symbol

Symbol LS 4208 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur