Supero Supero SAS-826A Manuel utilisateur

Rev. 1.0

SAS-826A Backplane

USER'S GUIDE

JSM1

JSM3

JSM2

DESIGNED IN USA

JP46

JP13

JP10

U40

111

U19

48 33

BZ1

C33

C94

C132

C32

C100

C285

C119

C197

C198

C201

C202

C44

C45

C84

C85

C138

C208

C107

C145

C215

C86

C87

C88

C213

C271 C272

D53

D54

D36

RT2

JP18

JP35

JP50

R330

R336

R337

R141

R376

R94

R208

R423

R422

R325

R201

R257

R200

R425

R424

R347

R63

R226

R249

R98

R123

R120

R126

R132

JP25

JP45

JP84

JP37

JP95

JP52

U24

U41

JP69

JP78

RP1

JP26

JP47

U18

BAR CODE

SAS IN #1

SAS IN #2

9072 RST

9071 RST

ACT4

ACT11

ACT10

ACT9

ACT8

ACT3

ACT2

ACT1

ACT7

ACT6

ACT5

ACT0

2-3:I2C

1-2:SGPIO

JP84:MODE

C2-3:55

1-2:50 C

COPEN:45

JP45:OH#2TEMP

C2-3:55

1-2:50

OPEN:45

JP25:OH#1TEMP

ALARM#1

ALARM#2

ACT_IN#8-11

ACT_IN#0-7

UPGRADE#2

UPGRADE#1

SAS IN #3

I2C#3

I2C#2

I2C#1

BUZZER RESET

REV 1.00

SAS826A

SUPER ®

SAS-826A Backplane User’s Guide

Manual Revision 1.0

Release Date: January 2, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Table of Contents

Contacting Supermicro.......................................................................................iv

Returning Merchandise for Service.....................................................................v

Introduction to the SAS-826A Backplane...........................................................vi

Chapter 1 SAS-826A Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

Chapter 2 Jumpers and Pin Denitions

2-1 Front Connectors and Jumpers ...................................................................... 2-1

Front Connectors ............................................................................................ 2-1

2-2 FrontConnectorandPinDenitions............................................................... 2-2

2-3 FrontJumperLocationsandPinDenitions................................................... 2-4

Explanation of Jumpers .................................................................................. 2-4

I2C and SGPIO Modes and Jumper Settings ................................................. 2-5

Front LED Indicators ....................................................................................... 2-6

2-4 Rear Connectors and LED Indicators............................................................. 2-7

SAS-826A Backplane User’s Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8226-1900

Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

For faster service, RMA authorizations may be requested online (http://www.super-

micro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

SAS-826A Backplane User’s Guide

Introduction to the SAS-826A Backplane

The SAS-826A backplane has been designed to utilize the most up-to-date technol-

ogy available, providing your system with reliable, high-quality performance.

ThismanualreectsSAS-826ARevision1.00,themostcurrentreleaseavailableat

the time of publication. Always refer to the Supermicro Web site at www.supermicro.

comforthelatestupdates,compatiblepartsandsupportedcongurations.

1-1

Chapter 1: Safety Guidelines

Chapter 1

SAS-826A Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufcient to protect your equipment from ESD.

Use a grounded wrist strap designed to prevent static discharge.•

Touch a grounded metal object before removing a component from the antistatic•

bag.

Handle the RAID card by its edges only; do not touch its components, peripheral•

chips, memory modules or gold contacts.

When handling chips or modules, avoid touching their pins.•

Put the card and peripherals back into their antistatic bags when not in use.•

1-2 General Safety Guidelines

Always disconnect power cables before installing or removing any components•

from the computer, including the SAS-826A backplane.

Disconnect the power cable before installing or removing any cables from the•

SAS-826A backplane.

Make sure that the SAS-826A backplane is securely and properly installed on•

the motherboard to prevent damage to the system due to power shortage.

1-2

SAS-826TQ Backplane User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB•

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this manual.

2-1

Chapter2:JumpersandPinDenitions

Chapter 2

Jumpers and Pin Denitions

2-1 Front Connectors and Jumpers

JSM1

JSM3

JSM2

DESIGNED IN USA

JP46

JP13

JP10

U40

111

U19

48 33

BZ1

C33

C94

C132

C32

C100

C285

C119

C197

C198

C201

C202

C44

C45

C84

C85

C138

C208

C107

C145

C215

C86

C87

C88

C213

C271 C272

D53

D54

D36

RT2

JP18

JP35

JP50

R330

R336

R337

R141

R376

R94

R208

R423

R422

R325

R201

R257

R200

R425

R424

R347

R63

R226

R249

R98

R123

R120

R126

R132

JP25

JP45

JP84

JP37

JP95

JP52

U24

U41

JP69

JP78

RP1

JP26

JP47

U18

BAR CODE

SAS IN #1

SAS IN #2

9072 RST

9071 RST

ACT4

ACT11

ACT10

ACT9

ACT8

ACT3

ACT2

ACT1

ACT7

ACT6

ACT5

ACT0

2-3:I2C

1-2:SGPIO

JP84:MODE

C2-3:55

1-2:50 C

COPEN:45

JP45:OH#2TEMP

C2-3:55

1-2:50

OPEN:45

JP25:OH#1TEMP

ALARM#1

ALARM#2

ACT_IN#8-11

ACT_IN#0-7

UPGRADE#2

UPGRADE#1

SAS IN #3

I2C#3

I2C#2

I2C#1

BUZZER RESET

REV 1.00

SAS826A

Front Connectors

#1. ACT_IN: JP26 and JP47

#2. Chips: MG9071 and MG9072

#3. I2C Connector#1 JP37

#4. I2C Connector#2 JP95

#5. I2C Connector#3 JP52

#6. Power Connectors (4-pin): JP10,

JP13, and JP46

#7. IPASS #1 JSM1

#8. IPASS #2 JSM2

#9. IPASS #3 JSM3

#10. Upgrade Connectors, JP69 and

JP78

Figure 2-1: Front Connectors

2-2

SAS-826A Backplane User's Guide

2-2 Front Connector and Pin Denitions

#2. MG9071 and MG9072 Chips

The MG9071 and MG9072 are enclosure

management chips that support the SES-2

controller and SES-2 protocols.

SAS Activity LED Header

Pin Denitions (JP26)

Pin#Denition Pin#Denition

1 ACT IN#0 6 ACT IN#4

2 ACT IN#1 7 ACT IN#5

3 ACT IN#2 8 ACT IN#6

4 ACT IN#3 9 ACT IN#7

5 Ground 10 Empty

#1. Activity LED Headers

The activity LED headers, designated JP26

and JP47, are used to indicate the activity

status of each SAS drive. The activity LED

headers are located on the front panel. For the

activity lead headers to work properly, connect

to them using a 10-pin LED cable. This is only

used when the activity LED is not supported

by the hard drive.

SAS Activity LED Header

Pin Denitions (JP47)

Pin#Denition Pin#Denition

1 ACT IN#8 6 ACT IN#12

2 ACT IN#9 7 ACT IN#13

3 ACT IN#10 8 ACT IN#14

4 ACT IN#11 9 ACT IN#15

5 Ground 10 Empty

#3., #4., #5. I2C Connectors

The I2C Connectors, designated JP37, JP52,

and JP95, are used to monitor HDD activity

and status. See the table on the right for pin

denitions.

I2C Connector

Pin Denitions

(JP37, JP52,

and JP95)

Pin#Denition

1 Data

2 Ground

3 Clock

4 No Connection

Table des matières

Autres manuels Supero Matériel informatique

Supero

Supero SAS-747TQ BACKPLANE Manuel utilisateur

Supero

Supero Supero SAS2-847EL BACKPLANE Manuel utilisateur

Supero

Supero Supero SAS 846 TQ BACKPLANE Manuel utilisateur

Supero

Supero SAS 808TQ Manuel utilisateur

Supero

Supero Supero SAS 815TQ Manuel utilisateur

Supero

Supero AOC-UG-i4 Manuel utilisateur

Supero

Supero SAS-216EL1/EL2 Manuel utilisateur

Supero

Supero AOC-SIM1U Add-on Card Manuel utilisateur

Supero

Supero Supero SAS-846EL Manuel utilisateur

Supero

Supero Supero SAS-836TQ Manuel utilisateur

Supero

Supero SAS 828TQ BACKPLANE Manuel utilisateur

Supero

Supero AOC-USAS-S4ir Manuel utilisateur

Supero

Supero AOC-SIMLC Manuel utilisateur

Supero

Supero X10DGO-T Manuel utilisateur

Supero

Supero AOC-1UIPMI-B Manuel utilisateur

Supero

Supero AOC-SIMSO+ Manuel utilisateur

Supero

Supero SAS2-836EL Manuel utilisateur

Supero

Supero CSE-SATA-813L Manuel utilisateur

Supero

Supero BPN-SAS3-827HQ Backplane Manuel utilisateur

Supero

Supero SAS-827B Manuel utilisateur

Supero

Supero Supero BPN-SAS-823TQ Manuel utilisateur

Supero

Supero AOC-USAS-L4i Manuel utilisateur

Supero

Supero BPN-EXP-847DR1EL1 Manuel utilisateur

Supero

Supero SAS 822TQ BACKPLANE Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur