Supero CSE-PTJBOD-CB3 Manuel utilisateur

CSE-PTJBOD-CB3

JBOD POWER BOARD

USER’S GUIDE

REVISION 1.0

CSE-PTJBOD-CB3

BACKPLANE

USER'S GUIDE

SUPER ®

1 2

16 19

A E K R Y

13 24

3748

MH2

MH4

JP6

U18

U17 U16U14

U13

JP7

JP5

JP1

JP2

JP3

JP4

JPW1

BT1

C10

MH3

MH1

C153

J4 J6 J7

JF1

JPI2C1

U12

U11

C131

FAN1

FAN2 FAN3 FAN4 FAN5 FAN6

FAN7

FAN8

FAN10

FAN9

Q27

Q16

D16

FB1

C21

LE2

LE1

Q5 Q4

JP5

JP7

2-3:DHCP

1-2:Static IP

2-3:SAS2_847D

1-2:SAS3 JF1

NMI X PWRLED X NIC1 X OH/FF X RST ON PWRON

Downloaded from Arrow.com.

CSE-PTJBOD-CB3 Power Board User's Guide

Manual Revision 1.0

Release Date: September 23 2014

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Downloaded from Arrow.com.Downloaded from Arrow.com.

iii

Preface

Table of Contents

Contacting Supermicro........................................................................................v

Returning Merchandise for Service....................................................................vi

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

1-4 Introduction to the CSE-PTJBOD-CB3 Power Board ..................................... 1-2

Chapter 2 Components, Connectors, Jumpers and LEDs

2-1 Components and Connectors ......................................................................... 2-1

2-2 ComponentandConnectorDenitions ........................................................... 2-2

2-3 Connectors Jumpers and LED Indicators ....................................................... 2-4

Chapter 3 Connecting to the Front and Rear Backplanes

3-1 SC847DJ JBOD Cabling................................................................................. 3-1

E16 I2C Cabling............................................................................................... 3-1

E26 I2C Cabling............................................................................................... 3-2

3-2 SC847B JBOD Cabling................................................................................... 3-3

SAS2/SAS3 I2C Cabling in the SC847B JBOD Chassis ................................ 3-3

3-3 SC847 Cabling ................................................................................................ 3-5

SAS I2C Cabling in the SC847 Chassis.......................................................... 3-5

3-4 SC417B Cabling.............................................................................................. 3-5

SAS2/SAS3 I2C Cabling in the SC417B Chassis ........................................... 3-5

Chapter 4 System Details

4-1 Chapter Overview ........................................................................................... 4-1

4-2 Control Panel .................................................................................................. 4-1

Control Panel Buttons ..................................................................................... 4-1

4-3 Control Panel LEDs ........................................................................................ 4-2

4-4 Power Up/Power Down Sequences................................................................ 4-4

Power Up Sequences ..................................................................................... 4-4

Power Down Sequence .................................................................................. 4-4

CSE-PTJBOD-CB3 IPMI Static IP to DHCP Setting ...................................... 4-5

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CSE-PTJBOD-CB3 Power Board User's Guide

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning to

the manufacturer, the RMA number should be prominently displayed on the outside

of the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Preface

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CSE-PTJBOD-CB3 Power Board User's Guide

Notes

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

1-1

Chapter 1 Safety Guidelines

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent damage

to your system, it is important to handle the backplane very carefully. The following

measures are generally sufcient to protect your equipment from ESD.

•Use a grounded wrist strap designed to prevent static discharge.

•Touch a grounded metal object before removing a component from the antistatic

bag.

•Handle the power board the edges only; do not touch the components, peripheral

chips, memory modules or gold contacts.

•When handling chips or modules, avoid touching their pins.

•Put the power board and peripherals back into their antistatic bags when not

in use.

1-2 General Safety Guidelines

•Always disconnect power cables before installing or removing any components

from the computer, including the backplane.

•Disconnect the power cable before installing or removing any cables from the

backplane.

•Make sure that the backplane is securely and properly installed on the mother-

board to prevent damage to the system due to power shortage.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

1-2

CSE-PTJBOD-CB3 Power Board User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this manual.

1-4 Introduction to the CSE-PTJBOD-CB3 Power Board

The CSE-PTJBOD-CB3 model power board has been designed to utilize the most

up-to-date technology available, providing your system with reliable, high-quality

performance.

The CSE-PTJBOD-CB3 allows the user to remotely control their jobs via IPMI, such

as powering on/off the server, controlling fan speeds and reading temperature data

from the backplane.

ThismanualreectstheCSE-PTJBOD-CB3Revision1.02powerboard,themost

current release available at the time of publication. Always refer to the Supermicro

web site at www.supermicro.com for the latest updates, compatible parts and sup-

portedcongurations.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

2-1

Chapter 2 Components, Connectors, Jumpers and LEDs

1 2

16 19

A E K R Y

13 24

3748

MH2

MH4

JP6

U18

U17 U16U14

U13

JP7

JP5

JP1

JP2

JP3

JP4

JPW1

BT1

C10

MH3

MH1

C153

J4 J6 J7

JF1

JPI2C1

U12

U11

C131

FAN1

FAN2 FAN3 FAN4 FAN5 FAN6

FAN7

FAN8

FAN10

FAN9

Q27

Q16

D16

FB1

C21

LE2

LE1

Q5 Q4

JP5

JP7

2-3:DHCP

1-2:Static IP

2-3:SAS2_847D

1-2:SAS3 JF1

NMI X PWR LED X NIC1 X OH/FF X RST ON PWR ON

Chapter 2

Components, Connectors, Jumpers and LEDs

2-1 Components and Connectors

Components and Connectors

1. BMC Chip

2. SAS2/SAS3 I2C Connectors JP1-JP4

3. Manufacturing Test Connector: J3

4. Manufacturer's USB Test Connector:

FB1

5. IPMI LAN LED Header: JP6

Figure 2-1: Components and Connectors on the CSE-PTJBOD-CB3

6. IPMI LAN Connector: J8

7. SC847D SAS2 I2C Connectors:

J4 - J7

8. Control Panel Connector: JF1

9. PMBus Connector: JPI2C1

10. Fan Connectors: FAN1 - FAN10

11. ATX Power Connector: JPW1

2-2

CSE-PTJBOD-CB3 Power Board User's Guide

2-2 ComponentandConnectorDenitions

2. SAS2/SAS3 I2C Connectors

These connectors are designated JP1-JP4

and allow the power board to be connected

to up to four SAS2/SAS3 backplanes.

1. BMC Chip

The Baseboard Management Controller

(BMC) chip monitors the physical state of

a system and provides communication with

the system administrator through an inde-

pendent connection.

4. Manufacturer's USB Test Connector

This connector is designated FB1 and is for

Supermicro manufacturing use only.

3. Manufacturing Test Connector

This connector is designated J3 and is for

Supermicro manufacturing use only.

5. IPMI LAN LED Header

This connector is designated JP6 and is

used to connect to the LED indicators on

the chassis using cable CBL-NTWK-0584

or CBL-NTWK-0587.

Table des matières

Autres manuels Supero Matériel informatique

Supero

Supero AOC-SIMSO+ Manuel utilisateur

Supero

Supero Supero SAS 815TQ Manuel utilisateur

Supero

Supero BPN-SAS3-213A Manuel utilisateur

Supero

Supero AOC-SIMLC Manuel utilisateur

Supero

Supero SAS 808TQ Manuel utilisateur

Supero

Supero SAS 933TQ Manuel utilisateur

Supero

Supero AOC-SIMLC-HTC Manuel utilisateur

Supero

Supero AOC-SGP-i4 Manuel utilisateur

Supero

Supero SAS-837A BACKPLANE Manuel utilisateur

Supero

Supero AOC-USAS-S4ir Manuel utilisateur

Supero

Supero SAS-216A Manuel utilisateur

Supero

Supero Supero SAS-846A Manuel utilisateur

Supero

Supero BPN-SAS3-827HQ Backplane Manuel utilisateur

Supero

Supero Supero SMT IPMI Manuel utilisateur

Supero

Supero BPN-SAS2-847DR Backplane Manuel utilisateur

Supero

Supero SAS 822TQ BACKPLANE Manuel utilisateur

Supero

Supero AOC-CGP-i2 Manuel utilisateur

Supero

Supero AOC-UG-i4 Manuel utilisateur

Supero

Supero SAS-747TQ BACKPLANE Manuel utilisateur

Supero

Supero Supero SAS-846EL Manuel utilisateur

Supero

Supero Supero BPN-SATA-933 BACKPLANE Manuel utilisateur

Supero

Supero AOC-1UIPMI-B Manuel utilisateur

Supero

Supero SAS 828TQ BACKPLANE Manuel utilisateur

Supero

Supero SAS-827B Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur