StarTech.com ST12MHDLAN4K Manuel utilisateur

Manual Revision: 03/29/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/ST12MHDLAN4K.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

ST12MHDLAN4K

HDMI® Over IP Extender Kit - 4K

*actualproductmayvaryfromphotos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction manual

Table of Contents

Introduction......................................................................................................... 1

Packaging contents.................................................................................................................................. 1

System requirements............................................................................................................................... 1

Product diagram................................................................................................. 2

Transmitter Unit......................................................................................................................................... 2

Receiver Unit............................................................................................................................................... 3

Installation............................................................................................................ 4

Preparing your site.................................................................................................................................... 4

Hardware installation .............................................................................................................................. 4

Software installation................................................................................................................................ 6

Technical support............................................................................................... 7

Warranty information ....................................................................................... 7

Introduction

Packaging contents

• 1 x HDMI over IP transmitter

• 1 x HDMI over IP receiver

• 2 x universal power adapters (NA, EU, UK, ANZ)

• 2 x mounting brackets

• 2 x CAT5 cables

• 2 x RJ11 to RS232 adapters

• 2 x RJ11 cables

• 1 x plastic screwdriver

• 1 x quick-start guide

System requirements

• An HDMI video source with cabling such as a computer or Blu-ray™ player

• An HDMI display with cabling such as televisions or projectors (one for each

receiver)

• A run of Network cabling for the transmitter and each receiver

Instruction manual

Instruction Manual

Product diagram

Transmitter unit

1. Function 1 button

2. Function 2 button

3. Dip rotary switch

4. Serial control port (not active)*

5. Serial extension (RS-232 signal)

6. Infrared (in) and (out) ports

7. Audio out port **

8. DC 9-12V power jack

Front view

Back view

34 5

11 12

9. Reset LED

10. Reset button

11. LAN port (RJ-45)

12. HDMI input port (audio/video)

13. Analog audio source port (3.5 mm stereo)

14. Audio source selection switch

15. Link and power LED

* Serial control port is not active. To control the ST12MHDLAN4K download

our free mobile application. (see Page 6).

**Audio out port is not functional in video wall or point to multi-point

congurations.

Instruction manual

Receiver unit

1. Function 1 button

2. Function 2 button

3. Dip rotary switch

4. Serial control (not active)*

5. Serial extension (for extending RS-232 signal)

6. Infrared (in) and (out) ports

7. Audio in port**

8. Video resolution selection switch

9. DC 9-12V power jack

10. Reset LED

11. Reset button

12. LAN port (RJ-45)

13. HDMI output port (audio/video)

14. Analog audio output (3.5 mm stereo)

15. Link and power LED

Front view

Back view

2345

910

12 13

* Serial control port is not active. To control the

ST12MHDLAN4K download our free mobile

application. (see Page 6).

**Audio in port is not functional in Video Wall or

Point to Multi-Point congurations.

Additional receiver units sold separately:

StarTech.com SKU: ST12MHDLAN4R

Instruction manual

Installation

Preparing your site

Note: The HDMI extender kit lets you extend your 4K30 video signals over a Gigabit

LAN network, beyond the typical cable length restriction of 330 ft. (100m) of Gigabit

network portals.

Refer to the manufacturer of the network equipment to determine the length

restriction and to ensure the transmitter unit and receiver unit(s) are all within the

restricted range of the nearest network portal.

Note: Ensure the transmitter unit, and receiver unit(s) are all situated near AC electrical

outlets.

1. Determine where the local video source will be located and set up the transmitter

near that location.

2. Determine where the remote display will be located and set up the receiver near

that location.

3. (Optional) If you’re using additional displays, determine where they will be located

and set the additional receiver unit(s) near that location.

Hardware installation

Video wall or point to multi-point installation with a Gigabit LAN network.

1. Install the transmitter unit.

a) Connect your video source to the transmitter’s video input port.

b) Connect the transmitter’s DC 9-12V power jack to an AC electrical outlet, using one

of the included power adapters.

c) (Optional) If you intend to add a separate 3.5 mm audio source that can be

embedded into the HDMI signal and selected as the audio source, connect a 3.5

mm audio cable to your audio source device and to the transmitter’s analog audio

source port.

2. Install the receiver unit(s).

a) Connect a display to the receiver unit’s video output port using an HDMI cable.

b) Connect the receiver unit’s power jack to an AC electrical outlet, using one of the

included power adapters.

c) (Optional) If you are using additional ST12MHDLAN4R receivers (sold separately),

repeat steps [a) through b)] for each additional receiver.

Note: The rotary dip switches on the transmitter and each receiver connected to the

network must be set in the same position for the devices to communicate.

Instruction Manual

3. Connect the devices to a Gigabit LAN network

a) Connect an RJ-45 terminated Cat5e or Cat6 Ethernet cable to the LAN port on the

transmitter unit, and to each of the receiver units.

b) Connect the other end of the Cat5e or Cat6 cable to a Gigabit LAN hub, router or

switch.

Note: Your router must support IGMP snooping and Jumbo frames. Please refer to your

network switch or router documentation to ensure IGMP snooping is supported and

enabled.

b) Connect the other end of the Cat5e or Cat6 cable to a Gigabit LAN hub, router or

switch.

4. Verify that the image from your video source appears on video display(s) attached

to the receiver unit(s).

(Additional receiver units sold separately, StarTech.com SKU: ST12MHDLAN4R)

HDMI over IP transmitter

HDMI over IP receivers

HDMI video source

Gigabit network switch

HDMI displays

Instruction Manual

Software installation

The HDMI distribution kit features video control software that helps you manage your

IP video distribution and video wall conguration. The software is available on iOS

for your iPhone or iPad, Android™ for your smartphone or tablet, and for the Google

Chrome™ browser.

To install the software:

1. Visit http://www.StarTech.com/ST12MHDLAN4K, using the device you intend to

install software on.

2. Under the overview tab, select the link for the store that corresponds with your

device.

Select the option to download and install the software from the store page.

3. Open the software, to verify that it has installed correctly.

Please note: A full production manual with details regarding operation of the

application is available at: http://www.startech.com/ST12MHDLAN4K

5. (Optional) Connect external 3.5 mm speakers to your remote receiver(s) Analog

audio output port.

6. Select your audio source.

a) If you’d like the remote device(s) (external speakers and HDMI displays) to output

the native HDMI audio that’s on your HDMI source, set the transmitter’s audio

selection switch to Video.

b) If you’d like to use the 3.5mm audio source that you connected to the Analog audio

source port, set the transmitter’s audio selection switch to Audio In.

Note: Both the HDMI output port and the Analog audio output will output whatever

audio source is selected.

Instruction manual

Technical support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship

for the periods noted, following the initial date of purchase. During this period,

the products may be returned for repair, or replacement with equivalent

products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Table des matières

Autres manuels StarTech.com Extenseur

StarTech.com

StarTech.com SV565UTPU Manuel utilisateur

StarTech.com

StarTech.com ST121UTPMINI Manuel utilisateur

StarTech.com

StarTech.com USBthere USB201EXT Manuel utilisateur

StarTech.com

StarTech.com USBthere USB100EXT Manuel utilisateur

StarTech.com

StarTech.com USB2G4LEXT2 Manuel utilisateur

StarTech.com

StarTech.com SV565UTPU Manuel utilisateur

StarTech.com

StarTech.com USBthere USB100EXT Manuel utilisateur

StarTech.com

StarTech.com USB3004EXT2 Manuel utilisateur

StarTech.com

StarTech.com SV565FXHD4KU Manuel utilisateur

StarTech.com

StarTech.com VS321HDBTK Manuel utilisateur

StarTech.com

StarTech.com PS2UTPEXT Manuel utilisateur

StarTech.com

StarTech.com ST122UTPA Manuel utilisateur

StarTech.com

StarTech.com ST121HD20FXA2 Manuel utilisateur

StarTech.com

StarTech.com ST1214T Manuel utilisateur

StarTech.com

StarTech.com USBthere USB204EXTFIB Manuel utilisateur

StarTech.com

StarTech.com ST121UTP232 Manuel utilisateur

StarTech.com

StarTech.com ST12MHDLAN2K Manuel utilisateur

StarTech.com

StarTech.com F35023-USB-EXTENDER Manuel utilisateur

StarTech.com

StarTech.com 4K70IC-EXTEND-HDMI Manuel utilisateur

StarTech.com

StarTech.com SV565UTPDUA Manuel utilisateur

StarTech.com

StarTech.com ST1218T Manuel utilisateur

StarTech.com

StarTech.com USBthere USB204EXTFIB Manuel utilisateur

StarTech.com

StarTech.com ST121UTPMINI Manuel utilisateur

StarTech.com

StarTech.com ST121WHDS Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur