Stanley TLM165I Manuel utilisateur

Stanley TLM165I 1

Table of Contents

Instrument Set-up- - - - - - - - - - - - - - - - - - - - - - -2

Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - -3

Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - -4

Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Adjusting measuring reference - - - - - - - - - - - - - - - - -4

Distance unit setting - - - - - - - - - - - - - - - - - - - - - - - - 5

Multifunctional endpiece- - - - - - - - - - - - - - - - - - - - - - 5

Measuring Functions - - - - - - - - - - - - - - - - - - -6

Measuring single distance - - - - - - - - - - - - - - - - - - - -6

Permament measuring- - - - - - - - - - - - - - - - - - - - - - - 6

Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7

Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7

Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - -8

Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - -8

Memory (5 last results) - - - - - - - - - - - - - - - - - - - - - -9

Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - 10

Message Codes - - - - - - - - - - - - - - - - - - - - - - - - 11

Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

Safety Instructions - - - - - - - - - - - - - - - - - - - - - 11

Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - 11

Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12

Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - -12

Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - -12

Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12

Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12

Electromagnetic Compatibility (EMC)- - - - - - - - - - - -12

FCC statement (applicable in U.S.) - - - - - - - - - - - - -13

Laser classification- - - - - - - - - - - - - - - - - - - - - - - - -13

Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13

Stanley TLM165I

Instrument Set-up

Introduction

The safety instructions and the user manual should be

read through carefully before the product is used for the

first time.

The person responsible for the product must ensure that

all users understand these directions and adhere to them.

The symbols used have the following meanings:

WARNING

Indicates a potentially hazardous situation or an unintended use

which, if not avoided, will result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation or an unintended use

which, if not avoided, may result in minor injury and/or appreci-

able material, financial and environmental damage.

Important paragraphs which must be adhered to in practice

as they enable the product to be used in a technically

correct and efficient manner.

Overview

Display

On / Measure /

Tracking

Area /

Volume /

Pythagoras/

Memory

Measuring

reference /

Unit

Add /

Subtract

Clear / Off

Stanley TLM165I

Instrument Set-up

Display

Battery

Units

Area /

Volume

Min/Max

Measuring

reference

Info

Addition /

Subtraction

Pythagoras

Memory

Main line

Insert batteries

To ensure a relia-

ble use, do not

use zinc-carbon

batteries.

Change batteries

when battery

symbol is flash-

ing.

Stanley TLM165I

Operations

Switching ON/OFF Clear Message Codes

2 sec

Device is

turned OFF.

Undo last action.

If the info icon appears with a

number, observe the instruc-

tions in section "Message

Codes".

Example:

Adjusting measuring reference

Distance is measured from the

front of the device.

Distance is measured from the pin

of the endpiece.

Distance is measured from the rear

of the device (standard setting).

Stanley TLM165I

Operations

Distance unit setting

0.000m

0'00" 1/16

0 in 1/16

Switch between the

following units:

2 sec

Multifunctional endpiece

Stanley TLM165I

Measuring Functions

Measuring single distance

Aim active laser at target.

8.532 m

Target surfaces: Measuring

errors can occur when meas-

uring to colourless liquids,

glass, styrofoam or semi-per-

meable surfaces or when

aiming at high gloss surfac-

es. Against dark surfaces the

measuring time increases.

Permament measuring

2 sec

8.532 m

Aim active laser at target.

The last value mea-

sured is displayed.

Stops permanent measuring.

Add / Subtract

7.332 m

The next meas-

urement is added

to the previous

one.

1x1x 2x

The next meas-

urement is sub-

tracted from the

previous one.

5.5I5 m

I2.847 m

The result is shown in the

main line and the measured

value above. This process

can be repeated as required.

The same process can be

used for adding or subtracting

areas or volumes.

Stanley TLM165I

Measuring Functions

Area

Aim laser at first

target point.

Aim laser at sec-

ond target point.

24.352 m

The result is shown in the

main line and the measured

value above.

Volume

Aim laser at first

target point.

Aim laser at sec-

ond target point.

Aim laser at third

target point.

78.694 m

The result is

shown in the

main line and

the measured

value above.

Stanley TLM165I

Measuring Functions

Pythagoras (2-point)

Aim laser at up-

per point.

Aim laser rectan-

gular at lower

point.

8.294 m

The result is shown

in the main line and

the measured dis-

tance above.

Pressing the meas-

uring key for 2 sec

in the function acti-

vates automatically

Minimum or Maxi-

mum measure-

ment.

Pythagoras (3-point)

Aim laser at up-

per point.

Aim laser at rec-

tangular point.

Aim laser at lower point.

8.294 m

The result is shown in the main

line and the measured distance

above.

Pressing the measuring key for

2 sec in the function activates

automatically Minimum or Maxi-

mum measurement.

Stanley TLM165I

Measuring Functions

Memory (5 last results)

8.294 m

5 last results are

displayed.

8.294 m

Navigates trough

5 last results.

Stanley TLM165I

Technical Data

* applies for 100 % target reflectivity (white painted

wall), low background illumination, 25 ºC

** applies for 10 to 500 % target reflectivity, high back-

ground illumination, -10 ºC to 50 ºC

*** Tolerances apply from 0.05 m to 10 m with a confi-

dence level of 95%. The maximum tolerance may

deteriorate to 0.15 mm/m between 10 m to 30 m and

to 0.2 mm/m for distances above 30 m

**** applies for 100 % target reflectivity, background

illumination of approximately 30'000 lux

Distance measurement

Typical Measuring Tolerance* ± 1.5 mm / 0.06 in ***

Maximum Measuring Toler-

ance**

± 3.0 mm / 0.12 in ***

Range at Target Plate 60 m / 197 ft

Typical Range* 50 m / 164 ft

Range at unfavourable condi-

tion ****

40 m / 132 ft

Smallest unit displayed 1 mm / 1/16 in

Ø laser point

at distances

6 / 30 mm

(10 / 50 m)

General

Laser class 2

Laser type 635 nm, < 1 mW

Protection class IP54 (dust- and splash

water protected)

Autom. laser switch off after 90 s

Autom. power switch-off after 180 s

Battery durability (2 x AAA) up to 3000 measure-

ments

Dimension (H x D x W) 104 x 58.8 x 29.6 mm

4.25 x 2.31 x 1.17 in

Weight (with batteries) 100 g / 3.53 oz

Temperature range:

- Storage

- Operation

-25 to 70 °C

-13 to 158 °F

-10 to 50 °C

14 to 122 °F

Functions

Distance measuring yes

Min/Max measuring yes

Permanent measuring yes

Addition/Subtraction yes

Area yes

Volume yes

Pythagoras 2-point, 3-point

Memory 5 results

Table des matières

Autres manuels Stanley Instrument de mesure

Stanley

Stanley STHT77611 Manuel utilisateur

Stanley

Stanley IntelliSensor Plus 77-115 Manuel utilisateur

Stanley

Stanley STHT77498 Manuel utilisateur

Stanley

Stanley Fatmax FMHT77446 Manuel utilisateur

Stanley

Stanley FATMAX FMHT77585 Manuel utilisateur

Stanley

Stanley TLM99 Manuel utilisateur

Stanley

Stanley 77-030 Manuel utilisateur

Stanley

Stanley STHT77616 Manuel utilisateur

Stanley

Stanley S4002 Manuel utilisateur

Stanley

Stanley STHT77502 Manuel utilisateur

Stanley

Stanley STHT77616 Manuel utilisateur

Stanley

Stanley Compulevel Manuel utilisateur

Stanley

Stanley TLM65 Manuel

Stanley

Stanley STHT1-77366 Mode d’emploi

Stanley

Stanley FMHT77165 Manuel utilisateur

Stanley

Stanley IntelliMeasure 0-77-018 Manuel utilisateur

Stanley

Stanley STHT1-77032 Manuel utilisateur

Stanley

Stanley Fatmax TLM330S Manuel utilisateur

Stanley

Stanley Tabs 25222 Manuel utilisateur

Stanley

Stanley SLL360 Manuel utilisateur

Stanley

Stanley TLM 130i Manuel utilisateur

Stanley

Stanley TLM160 Manuel utilisateur

Stanley

Stanley Fatmax TLM165S Manuel utilisateur

Stanley

Stanley TLM99 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur