ST Turbo+ mPSD DK3400 Manuel utilisateur

March 2007 Rev 3 1/24

UM0299

User manual

Turbo+ µPSD DK3400 with RIDE software

Introduction

The Turbo+ µPSD DK3400 with RIDE software is a development kit which provides all you

need to develop and debug applications. An easy-to-use graphical interface provides a quick

and efficient way of:

■Compiling projects and programming the flash memory, see Section 3.2 on page 9.

■Doing single-step execution and source-level debugging, see Section 3.3 on page 10.

■Obtaining device specific formatted displays, see Section 3.4 on page 10.

■Inserting breakpoints, see Section 3.5 on page 11.

■Performing symbolic debugging and monitoring variables, see Section 3.6 on page 12.

■Iterating code, see Section 3.7 on page 12.

■Setting instruction traces approaching real-time performance, see Section 3.8 on page

13.

This development kit contains a simple demonstration project that illustrates the power and

efficiency of the software development tools based upon Raisonance RIDE software. It also

demonstrates the capabilities of the embedded eRLink which provides many features for

editing, compiling, programming, and debugging programs developed for the Turbo+ µPSD

DK3400 MCU Series from STMicroelectronics.

The demonstration application code is a RIDE-based project that shows how to use the

GPIO block within the µPSD3400 device. It is a very simple demo that drives an external red

LED. During the short tutorial, you will be able to step through the code and change the LED

blinking rate.

The DK3400 kit also includes an evaluation version of Keil µVision 3 and Keil ULINK JTAG

adapter. You can try the evaluation version of µVision 3 (code-limited) and upgrade to a full

version for a complete µPSD3400 development environment.

www.st.com

Contents UM0299

2/24

Contents

1 Delivery checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Installing the software and connecting the hardware . . . . . . . . . . . . . . 7

2.1 Installing the µPSD3400 development kit CD . . . . . . . . . . . . . . . . . . . . . . . 7

2.2 Connecting the µPSD3400 circuit board . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3 Running the demo project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1 Opening the demo project in RIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.2 Compiling the project and programming the flash memory . . . . . . . . . . . . 9

3.3 Debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.4 Changing the display of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.5 Setting breakpoints in the program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.6 Monitoring variables in the Watch window . . . . . . . . . . . . . . . . . . . . . . . . 12

3.7 Iterating code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.8 Setting instruction traces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.8.1 Starting the trace utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.8.2 Displaying traces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.9 RIDE windows and icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Appendix A µPSD3400 jumper descriptions and default settings. . . . . . . . . . . 19

Appendix B Product support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

B.1 Software updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

B.2 Hardware spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

B.2.1 Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

B.2.2 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

B.3 Getting prepared before you call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Appendix C Revision history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

UM0299 List of tables

3/24

List of tables

Table 1. Summary of icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Table 2. ED3K4 jumpers factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Table 3. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

List of figures UM0299

4/24

List of figures

Figure 1. Turbo+ µPSD DK3400 development board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 2. RIDE menu bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Figure 3. Project window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 4. MCU registers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Figure 5. Watch window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 6. Trace options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Figure 7. Code view (disassembly) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Figure 8. Trace display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Figure 9. Messages window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Figure 10. RIDE interface window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Figure 11. ED3K4 jumpers factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

UM0299 Delivery checklist

5/24

1 Delivery checklist

This section lists the hardware and software components of the Turbo+ µPSD DK3400

development kit.

Hardware components

●Turbo+ µPSD DK3400 development board- with a ED3K4 v1.1 daughter-card and

µPSD3434E-40U6 (see Figure 1),

●eRLINK, an embedded JTAG adapter from Raisonance for debugging with Raisonance

integrated development environment (RIDE), present on bottom-side of ED3K4,

●ULINK, a USB-based JTAG adapter from Keil for debugging with Keil's uVision tools,

●USB cables and RS232 cable,

●A 110/220V universal power supply adapter.

Figure 1. Turbo+ µPSD DK3400 development board

Delivery checklist UM0299

6/24

Software components on the Turbo+ µPSD DK3400 CD from

STMicroelectronics

●RIDE C-compiler and assembler (limited to 4Kbytes code size) in RIDE

●RIDE debugger utility (no code size limit) in RIDE

●µPSD3400 sample projects with USB support and application notes

●CAPS software (configuration and programming system) from STMicroelectronics for

configuring the programmable logic inside the µPSD3400. This software is a

replacement for the former PSDSoft Express tool.

●STMicroelectronics datasheets, tools, software, user manual and application notes

●Keil uVision 3 software and support tools for µPSD3400 - (demo version limited to

2Kbytes code size)

The µPSD3400 circuit board with its embedded RLINK tool or your own designed circuit

board with a µPSD3400 MCU is all that is needed to develop code. The RIDE debugger

utility can be used to symbolically debug 8051 code generated from almost any 8051

compiler. Therefore, you have the choice between two options:

●Keeping your existing 8051 compiler and debugging with the RIDE debugger (no code

size limit),

●Upgrading from the evaluation version of the RIDE compiler on the CD to the full

version so that you can compile with no size limit and debug code all within the RIDE

environment. Go to the Raisonance web site for more information on RIDE and

upgrades.

UM0299 Installing the software and connecting the hardware

7/24

2 Installing the software and connecting the hardware

This section explains how to install the software provided on the development kit CD and

how to connect the µPSD3400 circuit board.

2.1 Installing the µPSD3400 development kit CD

1. Insert the STMicroelectronics CD supplied with the µPSD3400 development kit in your

CD drive. The auto run utility will bring up the home page or the main menu page.

2. Click on Install ST and 3rd Party Tools.

3. Install CAPS, accept all default choices.

4. Install RIDE, accept all default choices.

5. Go back to the home page and click on Copy Device Drivers and Demo Code.

6. Click on Install Demos for the Ride Environment (Raisonance).

7. Unzip the files in the foloder of your choice on your hard drive.

2.2 Connecting the µPSD3400 circuit board

1. Check the jumper settings on the board and make sure that they match the default

settings shown in Appendix A: µPSD3400 jumper descriptions and default settings on

page 19.

The embedded Rlink should detect the Turbo+ µPSD DK3400 MCU immediately.

2. Connect the eRLINK USB plug to your PC/laptop using the supplied USB cable and let

the USB driver install on Windows.

3. Attach the power plug (9V DC, 500mA) to the CN0 power jack of the motherboard.

4. Switch ON the DK3400 motherboard (SW1 in position ON).

Running the demo project UM0299

8/24

3 Running the demo project

This section contains a number of exercises that will rapidly help you become familiar with

the major steps for creating and debugging µPSD3400 projects.

Using the demo project supplied with the µPSD3400 development kit as an example, it

provides step-by-step instructions on how to to do basic tasks in RIDE. You can refer to

Figure 10 on page 18 for help as you follow the procedures.

3.1 Opening the demo project in RIDE

1. Launch RIDE from the Windows programs menu (Raisonance Kit 6.1) or from the RIDE

icon.

The RIDE title menu bar is diplayed (see Figure 2) with a blank workspace.

Figure 2. RIDE menu bar

2. Open the demo project.

a) In title menu bar click "Project", then "Open".

b) Double-click on the project named led_blink.prj, in the folder:

\RIDE\EXAMPLES\8051\DERIVATIVES\ST_UPSD\UPSD3400\LED_BLINK

The project files are displayed in the left side of the window. (See Figure 3).

3. Click on the "+" to expand the project files and then double-click on led_blink.c to open

it.

UM0299 Running the demo project

9/24

Figure 3. Project window

3.2 Compiling the project and programming the flash memory

1. Click the "Make All" icon in the menu bar:

This compiles and builds the project.

2. Start the debugger by clicking the debugger icon in the menu bar.

This programs the flash and refreshes the RIDE environment, showing actions in the

"Debug/Action/Messages Window" (See Figure 10 on page 18 ).

The line highlighted in blue in the Code/ Edit/Trace window indicates where MCU

execution has stopped in the main program, waiting for your debugging command. In

the example shown in Figure 10, MCU execution stopped at the first line of executable

code.

Running the demo project UM0299

10/24

3.3 Debugging

1. Click the "Go" icon in the menu bar to run the program.

The program runs full speed with the D6 red LED (middle LED in the bank of 3 red

ones) blinking at a couple HZ frequency.

2. Click the "Reset" icon to restart execution at the first line of the main program.

The blue line should be on blink_delay = SHORT.

3. Click the "Step-In" icon twice.

The debugger is now in the called function, timer0_init().

4. Double click " Disassembly Code" in the left debugger window.

This opens a display named "Disassembly code (led_blink)" showing both C and

Assembly code source instructions.

5. Click the "Step-Over" icon a few times to see that code execution can be stepped one

assembly instruction at a time.

6. Click "Reset" to return to the main program, led_blink.c.

7. Click on the LED_BLINK.C tab the Code/ Edit/Trace window to return to the C code

window.

3.4 Changing the display of information

1. Double-click the "Main Registers" icon in the left debugger window.

The contents of the MCU core registers is displayed (see Figure 4).

Table des matières

Autres manuels ST Microcontrôleur

ST STM32F030 Manuel utilisateur

ST ST802RT1 Manuel utilisateur

ST ST25R3911B-DISCO Manuel utilisateur

ST STM32F205 series Manuel du propriétaire

ST STM32F7508-DK Manuel

ST STM32F446 Series Manuel utilisateur

ST UM0250 Manuel utilisateur

ST STM32F20 Series Instructions d'installation et d'utilisation

ST STM32F101xx series Manuel utilisateur

ST STM32 Nucleo Instructions d'installation et d'utilisation

ST STEVAL-IDB007V1M SPBTLE-1S Manuel utilisateur

ST ST7LITE1 B Series Manuel utilisateur

ST ST10F276E Manuel utilisateur

ST STM32G0 1 Series Manuel utilisateur

ST FP-SNS-SMARTAG1 Manuel utilisateur

ST SPC574S-DISP Sphaero Discovery+ Manuel utilisateur

ST STM8S Manuel utilisateur

ST STM32H5 Nucleo-144 Manuel utilisateur

ST STM32L496 Series Instructions d'installation et d'utilisation

ST STM32C0 Series Instructions d'installation et d'utilisation

ST STM8L Instructions d'installation et d'utilisation

ST STM32F0 Series Instructions d'installation et d'utilisation

ST STM32F4DISCOVERY Manuel utilisateur

ST STM32F105 series Instructions d'installation et d'utilisation

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur