Spypoint Force-Dark Manuel utilisateur
QUICK START GUIDE
FORCE-DARK AND
COMPARABLE * v.1.3
2
ENGLISH
IN THE BOX
1x Camera
1x 16 GB SD card
1x SD card reader
1x Mounting bracket
1x Installation strap
1x Quick Start Guide
NOTE
Batteries sold separately.
User Manual, software updates & FAQs available at:
www.spypoint.com/support.
COMPONENTS
qPhoto lens
wTest light
eDetection lens
r12 V jack
tMicrophone
yBUSY light
uBattery compartment
iSlot for installation strap
oScrew-thread for
standard ¼”-20
aLocking latch
sLED
dOK Button
fNavigation buttons
gViewing screen
hSD card slot
3
ENGLISH
q
w
e
r t
y u i
o
a
s
g
f
d
h
4
ENGLISH
The specications and characteristics of similar models
may vary. Refer to the website or packaging for details.
PREPARATION
SELECT A POWER SOURCE
Three types of power sources are available to the user:
8 AA batteries inserted in the battery compartment.
Make sure to insert the AA batteries according
to their polarity (+) and (-).
Alkaline or lithium batteries
5
ENGLISH
FOR MAXIMUM PERFORMANCE AND WITHOUT LEAKING BATTERIES
• Use new batteries.
• Use ONLY alkaline or ONLY lithium
batteries.
• Do not mix new and old batteries.
• Do not use rechargeable AA
batteries, as their lower voltage
may cause operating diculties.
1. An external 12V battery (#BATT-12V
sold separately) plugged into the
12V socket on the bottom of the
camera, behind a protective rubber
cap.
2. A rechargeable lithium battery
pack #LIT-09 (sold separately),
to insert in the camera's battery
compartment.
The camera was designed to draw its energy in the
following priority order:
• 12V battery plugged in the 12V camera socket.
• AA batteries/lithium battery pack.
For more information about the dierent power sources
for your camera, please refer to the User Manual at
www.spypoint.com/support.
12 V jack
6
ENGLISH
INSTALLING AN SD CARD
The camera was designed to operate with an SD card,
class 10, between 2 and 32 GB of memory.
INSERT AN SD CARD
• Make sure the camera is turned OFF.
• Locate the SD card slot. It is on the right, above the viewing
screen (see diagram).
• Insert an SD card (up to 32 GB) in the slot and make sure to
respect the direction indicated in the diagram.
• The card is inserted correctly when a click is heard.
FORMAT YOUR SD CARD
Before inserting the SD card in your camera, it must be fromatted
to ensure proper operations. Visit www.spypoint/support if
you need help formatting your SD card.
7
ENGLISH
CONFIGURATION
Use the and buttons to navigate the menus and change
options, the OK button to select and the BACK button to return
to the previous menu.
GENERAL SETTINGS SETUP
1. To turn the camera ON/OFF, press and hold the OK button.
2. Choose the language. By default, the camera menu is in
English. If you want to use another language, after turning
the camera ON, choose SETTINGS, GENERAL, then
LANGUAGE. Choose one of the 3 languages available:
English, Deutsch (German), or Français (French).
3. From the home menu, select SETTINGS, then GENERAL to
access the general conguration menu:
• Set the Date (MM/DD/YY or DD/MM/YY).
• Set the Time (hour/minute).
• Set the Nighttime (best option for photos).
(Conguration)
Photo
(Conguration)
Time lapse
(Conguration)
Vidéo
(Conguration)
Général
HOME
SETTINGS
Start camera
Detection test
View
Settings
Photo
Time-lapse
Video
General
8
ENGLISH
COMPARISON OF HYBRID ILLUMINATION MODES *
CONFIGURING THE SETTINGS FOR THE 3 OPERATING MODES
From the home menu, select SETTINGS, then PHOTO, TIME-LAPSE,
or VIDEO to access the respective mode conguration menu.
PHOTO
Delay: Sets the time interval between each detection before
the camera takes the next photo.
(Conguration)
Photo
(Conguration)
Time lapse
(Conguration)
Vidéo
(Conguration)
Général
SETTINGS
Photo
Time-lapse
Video
General
HOME
Start camera
Detection test
View
Settings
9
ENGLISH
Multi-shot: Takes up to 6 consecutive shots at each detection
with a 5 second delay between each photo.
TIME-LAPSE
Interval: This option allows the camera to take photos at regular
preset intervals without movement detection.
VIDEO
Delay: Sets the time interval between each detection before
the camera records the next video.
Video length: Allows the user to select the duration of the
recording.
Photo rst: When this option is enabled, a photo is taken
immediately before each video.
SUGGESTED PHOTO MODE CONFIGURATION
Usage in trails Usage by a feeder
Delay Instant. 5 min
Multi-shot 1 1-3
10
ENGLISH
INSTALLING YOUR CAMERA
MOUNTING BRACKET AND STRAP
Install your camera against a tree, using either:
1. The strap and the mounting bracket together.
2. Only the strap inserted directly into the camera.
When the camera is installed using the mounting bracket, it
can be removed to access the battery compartment without
disturbing the installation.
MOUNTING BRACKET
To remove the camera from
the mounting bracket:
1. Push the tab to release the
camera from the mounting
bracket.
2. Remove the camera.
OR
q
Autres manuels pour Force-Dark
2
Table des matières
Autres manuels Spypoint Caméra de repérage
Spypoint
Spypoint BF-6 Manuel utilisateur
Spypoint
Spypoint LINK-DARK Manuel utilisateur
Spypoint
Spypoint LINK-MICRO Manuel utilisateur
Spypoint
Spypoint LING-4G Manuel utilisateur
Spypoint
Spypoint LIVE-3G Manuel utilisateur
Spypoint
Spypoint Solar-Dark Manuel utilisateur
Spypoint
Spypoint FORCE-11 Manuel utilisateur
Spypoint
Spypoint CELL-LINK Manuel utilisateur
Spypoint
Spypoint Solar-Dark Manuel utilisateur
Spypoint
Spypoint IRON-9 Manuel utilisateur
Spypoint
Spypoint mini-LIVE Manuel utilisateur
Spypoint
Spypoint LINK-CT Manuel utilisateur
Spypoint
Spypoint FORCE-10 Manuel utilisateur
Spypoint
Spypoint S-WiFi model Manuel utilisateur
Spypoint
Spypoint FORCE-PRO-S Manuel utilisateur
Spypoint
Spypoint mini-LIVE Manuel utilisateur
Spypoint
Spypoint IRON-9 Manuel utilisateur
Spypoint
Spypoint Force-Dark Manuel utilisateur
Spypoint
Spypoint LINK-MICRO-LTE Manuel utilisateur
Spypoint
Spypoint G4 Manuel utilisateur
