Spypoint LINK-MICRO Manuel utilisateur

LINK-MICRO

QUICK START

GUIDE

v.1.1

ENGLISH

In the Box

1x Camera

1x Installation strap

1x Quick Start Guide

1x Micro SIM card already activated and inserted in the camera

Note: Memory card and batteries sold separately.

User manual, latest rmware & FAQ available at

support.spypoint.com

Antenna

Detection lens

Micro SD Card slot

Light sensor

Delay light

Photo lens

LED

“status” Light

ON/OFF button

Battery case outlet

MicroSIM Card slot

Battery housing

Slot for installation strap

Locking latch

Cable lock hole

12V Jack

Tripod stand

COMPONENTS

ENGLISH

Steel security boxes may reduce the wireless functionalities of the product.

(#SB-300 sold separately)



ENGLISH

PREPARATION

FINDING THE SIM ID

The SIM ID number is located inside the casing behind the battery

housing. You will need this number to complete the LINK-MICRO camera

registration to connect to the application.

CHOOSING A POWER SOURCE

Be sure to insert the AA batteries according to the polarity indications (+) and (-).

Lithium or Alkaline batteries



12V

12V power source

ENGLISH

To ensure maximum performance of the camera and prevent battery

leakage, we recommend using new batteries. Use ONLY Lithium

batteries or ONLY Alkaline batteries. Rechargeable [AA] batteries are not

recommended as the lower voltage they produce can cause operational

issues.

To get the best possible results and maximum battery life, we

recommend the use of an external 12V source.

INSERTING A MEMORY CARD

Always ensure that the camera is turned off before inserting a memory

card. Insert a MICRO SD memory card (up to 32 GB capacity) into the

MICRO SD card slot with the label side facing upwards. The card is

inserted correctly when a click is heard.

We recommend formatting your MICRO SD card if it was previously in another

electronic device.





ENGLISH

GETTING STARTED

INSTALLING THE FREE SPYPOINT APP

The SPYPOINT App allows you to connect and control your camera

remotely using a smartphone or tablet. Features include viewing your

camera status, viewing pictures, full remote camera control and more.

Note: If you don’t have a smartphone or tablet, please contact our

Customer Service to activate your camera.

Call us at our toll free number: 1-888-779-7646 or email us:

[email protected]

Installing the free App

1. Make sure you have a data plan with either your smartphone or

tablet, or a WIFI connection.

2. To install the App, you can either:

• Download it from Google Play™ (Google Play is a registered trademark of Google Inc)

• Download it from the App Store™ (App Store is a trademark of Apple Inc.)

3. Search for the App: SPYPOINT by SPYPOINT.

4. Install the App on your smartphone or tablet.

ENGLISH

Run the App SPYPOINT

Start the App and it will guide you through a few questions. You will then

receive an email conrming the activation of your camera.

Just follow the prompts in the App.

APP CONFIGURATION

The SPYPOINT App allows you to congure all the camera settings. These

new settings will take effect the next time the camera transfers data to

update its status. The most important settings are:

Basic settings

MODE - PHOTO

Delay : Sets the time interval between each detection before

the camera takes the next photo.

Multi-photo : Takes up to 2 consecutive shots at each detection

with a 5 second delay between each photo

Transfer conguration

First transfer time: Allows the user to choose what time of the day

the camera will carry out its rst transfer.

Transfer frequency: Allows the user to choose the number of

transfers that the camera performs daily.

ENGLISH

Advanced options conguration

Schedule: Allows the user to set the period of operation of the camera

for each day of the week. The scheduled start and stop times

delineate the hours when the camera is activated and can

record photos. For a 24 h activation, the start and

stop times shall be 00 h 00 or 12 h AM.

ENGLISH

STARTING THE CAMERA

We recommend formatting your MICRO SD card if it was used in another electronic

device.

• Turn on the camera (ON button);

- Use the OFF/ON switch to turn on the camera;

• The green “status” light ashes – searching for a signal;

- The signal search can take a few minutes;

• Light “status”: One of the following 3 colors will light up continuously:

- Red: insufcient signal;

- Orange: acceptable signal;

- Green: optimal signal;

• When the top right light ashes red, 30 seconds remain before the

photo mode is turned on;

• The camera is ready for use when all the lights turn off;

• If the light is red during step 3, you should:

- Turn your camera off and then back on;

- Retry while pointing the antenna at different angles;

- Move the camera.

*Using an amplied antenna (#CA-01, not included) could improve

signal capture.



ENGLISH

CAMERA INSTALLATION

Install the camera using the strap

Recommended installation height

The camera should be installed at the same height as the animal’s mid-

body.

Ideal installation for quality images

The targeted animal should be 7.5 m away from the camera for a better

eld of view.

To get brighter pictures at night, you should have elements in the

background to reect back the camera’s ash.

Please note that the camera should not be placed directly facing the sun

to avoid backlighting and false detection.

Important

Before the end of the free 30-day trial

Subscribe to a service plan in the App to benet from SPYPOINT

EXPERIENCE lease note that if you choose not to subscribe to a plan,

you will still be able to receive up to 100 photos per month with a

photo history of the last 7 days with our FREE monthly plan.

www.spypoint.com/plans

Table des matières

Autres manuels Spypoint Caméra de repérage

Spypoint

Spypoint XCEL 720W Manuel utilisateur

Spypoint

Spypoint SMART Manuel utilisateur

Spypoint

Spypoint LINK-EVO? LINK-EVO-V Manuel utilisateur

Spypoint

Spypoint mini-LIVE Manuel utilisateur

Spypoint

Spypoint LINK-EVO Mode d’emploi

Spypoint

Spypoint IRON-9 Manuel utilisateur

Spypoint

Spypoint LINK-S Manuel utilisateur

Spypoint

Spypoint BF-6 Manuel utilisateur

Spypoint

Spypoint FORCE-10 Manuel utilisateur

Spypoint

Spypoint LINK-S-DARK Manuel utilisateur

Spypoint

Spypoint LINK-EVO Mode d’emploi

Spypoint

Spypoint CELL-LINK Series Manuel utilisateur

Spypoint

Spypoint LINK-3G Manuel utilisateur

Spypoint

Spypoint CELL-LINK Manuel utilisateur

Spypoint

Spypoint LINK-MICRO-LTE Manuel utilisateur

Spypoint

Spypoint mini-LIVE Manuel utilisateur

Spypoint

Spypoint LINK-EVO Manuel utilisateur

Spypoint

Spypoint LING-4G Manuel utilisateur

Spypoint

Spypoint LINK-MICRO-S-LTE Manuel utilisateur

Spypoint

Spypoint IRON-10 Manuel utilisateur

Spypoint

Spypoint FORCE-20 Manuel utilisateur

Spypoint

Spypoint FORCE-PRO Manuel utilisateur

Spypoint

Spypoint LM2 Manuel utilisateur

Spypoint

Spypoint LIVE Manuel utilisateur

Manuels Caméra de repérage populaires d'autres marques

Nestbox

Nestbox C13 Manuel utilisateur

Wildview

Wildview STC-TGL1 Manuel utilisateur

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuel utilisateur

Suntek

Suntek HC-800M Manuel utilisateur

Duramaxx

Duramaxx 10029765 Manuel utilisateur

Brecom

Brecom C2400 Manuel utilisateur

BlazeVideo

BlazeVideo A280W Manuel utilisateur

Bestok

Bestok 5210GM Manuel utilisateur

GardePro

GardePro X60P Manuel utilisateur

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuel utilisateur

PNI

PNI HUNTING 280C Manuel utilisateur

Muddy

Muddy Pro-Cam 14 Manuel utilisateur

Bresser

Bresser 3310006 Manuel utilisateur

Recon Outdoors

Recon Outdoors HS410 Manuel utilisateur

Braun

Braun 57660 Manuel utilisateur

Wildgame

Wildgame Shadow Manuel utilisateur

Hieha

Hieha WiFi900Pro Instructions de montage

Bushnell

Bushnell 119437 Manuel utilisateur