Spypoint CELL-LINK Manuel utilisateur

QUICK START GUIDE

CELL-LINK v.1.6

ENGLISH

IN THE BOX

1x CELL-LINK cellular adapter

1x Micro SIM card (preactivated and inserted into the CELL-LINK)

1x Cable with SD adapter (#CL-CBL)

1x Antenna

1x Mounting strap

1x Quick Start Guide

NOTE

Memory card and batteries are sold separately.

User Manual, latest rmware, and FAQ available at:

www.spypoint.com/support.

COMPONENTS

qCable with SD adapter

(#CL-CBL)

wSlot for mounting strap

eCable lock hole

rSIGNAL lights (5)

tSIM card slot

yLatch to hold/release

the battery compartment

uBattery compartment

iAA battery holder

oSTATUS light

aON/OFF switch

sMicroSD card slot

dScrew-thread for standard

¼”-20 tripod mount

fAntenna

gPort for cable with SD

adapter

h12 V jack

jLocking latch

ENGLISH

PREPARATION

ATTACH THE ANTENNA

When buying the CELL-LINK, the

antenna comes in the box and

is detached from the device.

To attach it, follow the next steps:

1. Remove the cap which covers

the antenna connector of the

CELL-LINK.

2. Screw the antenna in the

connector by turning it

clockwise.

SELECT A POWER SOURCE

• 8 lithium or alkaline AA batteries

• 12 V rechargeable battery

(#KIT-12V, sold separately)

• 3.7 V rechargeable battery pack

(#LIT-10, sold separately)

NOTE

We recommend using the SPYPOINT #LIT-10

rechargeable lithium battery pack, sold separately.

ENGLISH

FOR BEST RESULTS AND NO LEAKAGE

• Use only new lithium or alkaline batteries.

• Do not mix old and new batteries.

• Do not use rechargeable AA batteries

(their lower voltage can generate operational issues).

HOW TO INSTALL AA BATTERIES PROPERLY

• Unlock and open the CELL-LINK door.

• Eject the battery holder by pushing

the latch (1) forward and pressing

down on the battery holder (2).

The battery holder will be unlocked

and you will be able to remove it.

• Insert 8 AA batteries following the

(+) and (-) polarity indicators.

• Place the battery holder back into the battery compartment,

an audible click should be heard.

FORMATTING YOUR MICROSD CARD

Before inserting the microSD card into your CELL-LINK, you must

reformat it using a computer to ensure proper functionality. Go

to our website: www.spypoint.com, if you need help formating

your microSD card.

The memory card is sold separately. Therefore, you must

rst purchase a class 10 microSD card, between 2 and 32 GB

of memory.

ENGLISH

INSERTING A MICROSD CARD

• Open the CELL-LINK battery

compartment door.

• Make sure the camera is turned

OFF.

• Insert the microSD card in the

slot for microSD cards, the metal

contacts facing the bottom (as

shown).

• The card is inserted correctly when

a click is heard.

ACTIVATING YOUR CELL-LINK

You have to activate your CELL-LINK before you can

use it. To do so, you will need the activation code.

FINDING THE ACTIVATION CODE

The activation code is located inside the CELL-LINK’s battery

compartment door.

Activation code

ENGLISH

To activate your device, you have two choices: you can

either do it via the SPYPOINT app or via our website

www.spypoint.com.

SPYPOINT APP

If you choose to use the SPYPOINT app to activate your

device, follow these steps:

1. On Google PlayTM or the App StoreTM,

search for“SPYPOINT app”.

2. Download and install the app on your smartphone or tablet.

3. Start the app. Select “ACTIVATE A DEVICE”. In the list, select

“CELL-LINK”, then follow the steps to create an account.

4. Once completed, a conrmation email with instructions on

how to nalize the creation of your account will be sent to

you.

5. Log in to the SPYPOINT app using your email address and

password.

SPYPOINT.COM WEBSITE

If you choose to use our SPYPOINT website to

activate your device, follow these steps:

1. On the www.spypoint.com website, select“LOGIN”in the

top navigation menu. On the displayed “SPYPOINT”page,

select “REGISTER”, ll out the required elds, then log in.

2. Select the +sign on the far right of the page; in the list, select

“CELL-LINK”, then follow the steps.

ENGLISH

3. Once completed, a conrmation email with instructions on

how to nalize the creation of your account will be sent to

you.

4. On the SPYPOINT website, log in to your account using your

email address and password.

CHOOSING A PHOTO TRANSMISSION PLAN FOR YOUR CAMERA

Go to www.spypoint.com/en/spypoint-experience/plans

to read the latest oers and choose the plan that suits you.

CONFIGURING YOUR CELL-LINK

Both the SPYPOINT app and website allow you to remotely

congure all the CELL-LINK’s parameters and to obtain the status

of its main elements, including cellular signal strength, battery

power level, and space used on the SD card.

Your new settings will be applied the next time your CELL-LINK

communicates with the SPYPOINT app or website.

NOTE

Before starting the CELL-LINK, make sure you have successfully

congured your trail camera according to your preferences and

that you have done this by following your camera’s User Manual.

ENGLISH

CONFIGURATION: MAIN SETTINGS

Here are the recommended camera settings to ensure

the optimal performance of your CELL-LINK:

• A low-resolution photo format.

• Precisely adjust the date and time.

• A delay no shorter than 1 minute between each detection.

• In Time-lapse mode, a delay no shorter than 1 minute.

NOTE

The CELL-LINK doesn’t support video transfers. However, if you

congure your camera to take a picture before each of your

videos, that picture will be sent to you via the CELL-LINK.

STARTING YOUR CELL-LINK

BEFORE TURNING YOUR CAMERA ON

Refer to the image below to familiarize yourself with the meaning

of the STATUS and SIGNAL LEDS. These light indicators will guide

you along the startup process.

ENGLISH

STARTING THE CELL-LINK

1 2

All the lights turn on for

three seconds.

2 possibilities:

The 1st red signal LED ashes

=low batteries.

The STATUS light stays on

+5 LED ashing = searching

for cellular signal. This can

take a few minutes.

STARTING YOUR CELL-LINK

Autres manuels pour CELL-LINK

Table des matières

Autres manuels Spypoint Caméra de repérage

Spypoint

Spypoint LINK-S-DARK Manuel utilisateur

Spypoint

Spypoint SMART Manuel utilisateur

Spypoint

Spypoint LINK-EVO Manuel utilisateur

Spypoint

Spypoint LM2 Manuel utilisateur

Spypoint

Spypoint FORCE-10 Guide de dépannage

Spypoint

Spypoint FLEX G-36 Manuel utilisateur

Spypoint

Spypoint LINK-DARK Manuel utilisateur

Spypoint

Spypoint SOLAR-W Manuel utilisateur

Spypoint

Spypoint LINK-MICRO-LTE Manuel utilisateur

Spypoint

Spypoint S-WiFi model Manuel utilisateur

Spypoint

Spypoint LIVE-3G Manuel utilisateur

Spypoint

Spypoint LINK-MICRO-LTE Manuel utilisateur

Spypoint

Spypoint BF-6 Manuel utilisateur

Spypoint

Spypoint LINK-MICRO-LTE Manuel utilisateur

Spypoint

Spypoint FLEX Manuel utilisateur

Spypoint

Spypoint LING-4G Manuel utilisateur

Spypoint

Spypoint MMS Manuel utilisateur

Spypoint

Spypoint XCEL 720W Manuel utilisateur

Spypoint

Spypoint mini-LIVE Manuel utilisateur

Spypoint

Spypoint LINK-MICRO-LTE Manuel utilisateur

Spypoint

Spypoint FORCE-PRO Manuel utilisateur

Spypoint

Spypoint FORCE-10 Manuel utilisateur

Spypoint

Spypoint SOLAR Manuel utilisateur

Spypoint

Spypoint SDB-85 Manuel utilisateur

Manuels Caméra de repérage populaires d'autres marques

Nestbox

Nestbox C13 Manuel utilisateur

Wildview

Wildview STC-TGL1 Manuel utilisateur

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuel utilisateur

Suntek

Suntek HC-800M Manuel utilisateur

Duramaxx

Duramaxx 10029765 Manuel utilisateur

Brecom

Brecom C2400 Manuel utilisateur

BlazeVideo

BlazeVideo A280W Manuel utilisateur

Bestok

Bestok 5210GM Manuel utilisateur

GardePro

GardePro X60P Manuel utilisateur

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuel utilisateur

PNI

PNI HUNTING 280C Manuel utilisateur

Muddy

Muddy Pro-Cam 14 Manuel utilisateur

Bresser

Bresser 3310006 Manuel utilisateur

Recon Outdoors

Recon Outdoors HS410 Manuel utilisateur

Braun

Braun 57660 Manuel utilisateur

Wildgame

Wildgame Shadow Manuel utilisateur

Hieha

Hieha WiFi900Pro Instructions de montage

Bushnell

Bushnell 119437 Manuel utilisateur