SOYO SY-6KL Manuel utilisateur

SY-6KL

Mainboard

Quick Start Guide

CTested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

RECYCLED PAPER

100%

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-6KL Mainboard

Pentium

II processor

82440 LX AGP/PCI Mainboard

66MHz Front Side Bus supported

AT/ATX Power Connectors

Trademarks:

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their

owners.

Product Rights:

Product and corporate names mentioned in this publication are used for identification purposes

only and may be registered trademarks or copyrights of their respective companies.

transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to revise the manual or make changes in the specifications of the

product described within it at any time without notice and without obligation to notify any

person of such revision or change. The information contained in this manual is provided for

general use by our customers. Our customers should be aware that the personal computer field is

the subject of many patents. Our customers should ensure that their use of our products does not

infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights

of third parties and not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide is for assisting system manufacturers and end users in setting up and

installing the mainboard. Information in this guide has been carefully checked for reliability;

however, no guarantee is given as to the correctness of the contents. The information in this

document is subject to change without notice.

If you need any further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

6KL Serial - Version 1.0 - Edition: August 1998

*Thesespecificationsaresubjecttochangewithoutnotice

SY-6KL

Quick Start Guide

Introduction

Congratulationsonyourpurchaseofthe

SY-6KL

Mainboard.ThisQuickStartGuide

describesthestepsforinstallingandsettingupyournewmainboard.

Thisguideisdesignedforalluserstoprovidethebasicstepsof mainboardsettingand

operation.Forfurtherinformation, pleasereferto SY-6KLMainboardUser'sGuideand

TechnicalReferenceonlinemanualincludedontheCD-ROMpackedwithyourmainboard.

Unpacking

*Ifyourboardcomeswithadriverdiscandapapermanual,theQuickStartGuideandtheCD-ROMarenotincludedinthepackage.

Whenunpackingthemainboard,checkforthefollowingitems:

TheSY-6KL82440LXAGP/PCI Mainboard

ThisQuickStartGuide

TheInstallation CD-ROM

TheCPURetentionSet

OneIDEDeviceFlat Cable

OneFloppyDiskDriveFlatCable

Onedual25-pinparallelwith25-pinflatcableand9-pin

serialwith9-pinflatcableexternalconnector

One9-pinserialconnectorwith9-pinflatcableand6-pin

PS/2mouseconnectorwith6-pincable

SY-6KL Quick Start Guide

Introduction

SY-6KL Mainboard Layout

Key Features

SupportsIntelPentium

processors(233-333MHz)&

Celeron™processors (266-366MHz)

Auto-detectCPUvoltage

PC97,ACPI,UltraDMA/33

Power-onbymodemoralarm

SupportsWake-On-LAN(WOL)

SupportsWake-UpbyPS/2Keyboard

orMouse

SupportsCreativeSB-LINK™(PC-PCI)

forPCIaudiocard

1x32-bitAGPslot

3x32-bitbusmasteringPCIslots

1xIrDAport

Supportsmultiple-bootfunction

DMIutility

AT/ATXpowerconnectors

Flash BIOS

JP44

IR1

JP5 1

SB-LINK™

AGP Slot

PCI Slot #1

PCI Slot #2

PCI Slot #3

ISA Slot #1

ISA Slot #2

ISA Slot #3

DIMM 1

DIMM 2

DIMM 3

IDE 1IDE 2

Slot 1 for

Pentium®

II Processor

PRT 1

COM 1

COM 2 FDC

ITE8671

Connector

PS/2 Mouse

Connector

ATX Power

AT Power

Speaker

Keylock

Power

LED

Reset

PWRBT

Turbo

LED

HDD LED

USB

JP12

JPW1

FAN1

FAN2

FAN3

SIMM 1

SIMM 2

Lithium

Battery

Intel

82371 AB

Intel

AGP Set

82443 LX

WOL

Header

CMOS Clear

Jumper

PS/2 Keyboard

Wake-Up

Jumper

781D

(optional)

(PC-PCI)5

SY-6KL

Quick Start Guide

Hardware

Installation

Toavoiddamagetoyourmainboard,followthesesimpleruleswhile

handlingthisequipment:

Beforehandlingthemainboard,groundyourselfbygraspinganunpaintedportionof

thesystem'smetalchassis.

Removethemainboardfromitsanti-staticpackaging.Holditbytheedgesandavoid

touchingitscomponents.

Checkthemainboardfordamage.Ifanychipappearsloose,presscarefullytoseatit

firmlyinitssocket.

Followthedirectionsinthissectiondesignedtoguideyouthroughaquickandcorrect

installationofyournew

SY-6KL

Mainboard.Fordetailedinformation,pleaserefer to SY-6KL

MainboardUser'sguideandTechnical Reference onlinemanualincludedontheCD-ROM

packedwithyourmainboard.

PREPARATIONS

Gatherandprepareallthenecessaryhardwareequipmenttocompletetheinstallation

successfully:

Pentium

processorwithbuilt-inCPUcoolingfan(boxedtype)

SDRAMmodule

Computercaseandchassiswithadequatepowersupplyunit

Monitor

PS/2Keyboard

PointingDevice

VGACard

SoundCard(optional)

Speaker(s)(optional)

DiskDrives:HDD,CD-ROM,Floppydrive…

ExternalPeripherals:Printer,Plotter,andModem-(optional)

InternalPeripherals:ModemandLANcards(optional)

SY-6KL Quick Start Guide

Hardware

Installation

Install the Mainboard

Followthestepsbelowinordertoperformtheinstallationofyournew

SY-6KL

Mainboard.

Step 1. Install the CPU

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourCPU

thatshouldbeclearlymarkedontheCPUcover.

233MHz (66 x 3.5) 300MHz (66 x 4.5) 366MHz (66 x 5.5)

266MHz (66 x 4.0) 333MHz (66 x 5.0)

CPU Mount Procedure:

TomountthePentium

IIprocessorthatyouhave

purchasedseparately,followthese instructions.

Unpack the Retention Kit 2

Position the Mainboard 3

Insert the Screws

Install the Supporting Base

Install the Retention Clip 6

Install the CPU

Install the Support Clip 8

Insert the Latches 9

Remember to connect the CPU

Cooling Fan to the FAN1 power

connector on the mainboard.

Supporting Base

Support Clip

Screws (x2)

Retention Clip

Latches (x2)

Larger Pinhole

Slot 1

ATX Power

Heat Sink

SY-6KL

Quick Start Guide

Hardware

Installation

Step 2. Make Connections to the Mainboard

Thissectiontellshowtoconnectinternalperipheralsandpowersupplytothemainboard.

InternalperipheralsincludeIDEdevices(HDD,CD-ROM),FloppyDiskDrive,Chassis Fan,

FrontPanelDevices(TurboLED,InternalSpeaker,ResetButton,IDELED,and KeyLock

Switch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.

FormoredetailsonhowtoconnectinternalandexternalperipheralstoyournewSY-6KL

Mainboard,pleasereferto SY-6KL MainboardUser's GuideandTechnicalReference online

manualonCD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link™(PC-PCI) Wake-On-LAN Header: JP44

Connect the SB-Link™(PC-PCI) cable from your

PCI audio card to this header. Connect the WOL cable from

your LAN card to JP44.

CPU Cooling Fan: FAN 1 Chassis Fan: FAN 3

Connect the CPU cooling fan cable to the

FAN1 power connector. Connect the case cooling fan cable to the

FAN3 power connector.

USB TB LED SPK

Plug your USB devices

to this header. Connect your Turbo LED

cable to this header. Connect the speaker cable to

this header.

RESET IDE LED KB-LOCK

Connect the reset button

to this header. Connect the IDE device

LED to this header. Connect the Power LED and

the KB Lock switch to this

header.

IrDA (Infrared Device Header): IR1 AT Power Supply

Connect the cable from your IrDA device to this

header. Connect the AT Power Supply

cable to this connector

ATX Power On/Off: PWRBT ATX Power Supply: ATX PW

Connect your power switch to this

header (momentary switch type).

Depending on the BIOS setting,

turning off the system is done by

“one touch”or by pressing the

switch for >4s longer than 4s.

ATX Power Select: JPW1

If you use a non-standard ATX power

supply, open this jumper.

Attach the ATX Power cable to this

connector.

When using the PS/2 Keyboard Wake-Up

function, please make sure the ATX

power supply can take at least 720mA

load on the 5V Standby lead (5VSB) to

meet the standard ATX specifications.

SY-6KL Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

YourboardcomeswiththreeDIMMsocketsandtwoSIMMbanks,providingsupportforup

to384MBofmainmemoryusingDIMMmodulesfrom8MBto128MBandSIMMmodules

from8MBto64MBwithnorestrictiononmemoryconfiguration.Therefore,youcaninstall

memorymodulesinanycombination.

For66MHzfrontsidebusCPUsuse12nsorfastermemory.

Memory Configuration

SIMM Bank DIMM BanksMEMORY

CONFIGURATION Bank 0 DIMM 1 DIMM 2 DIMM 3

RAM Type EDO EDO/SDRAM EDO/SDRAM EDO/SDRAM

Single RAM

Module Size (MB) 8/16/32/64 8/16/32/64/128 8/16/32/64/128 8/16/32/64/128

Notice 1: You must always install two (2) SIMM modules to complete the SIMM bank.

Notice 2: Do not install memory modules in SIMM and DIMM 3 at the same time.

Step 4. Set the CPU Frequency

YoudonotneedtosetanyjumperfortheCPUfrequency.Instead,CPUsettingarechanged

throughtheBIOS

[CHIPSETFEATURESSETUP].

Pleasereferto Chapter3-QuickBIOS

SetupfordetailsonhowtosetthePentium

IIprocessorfrequency.

Step 5. Enable/Disable PS/2 Keyboard Wake-Up (JP12)

YoucanchoosetoenabletheWake-UpbyPS/2KeyboardorMousefunctionbyshorting

pin1-2onjumperJP12,otherwise,removethejumpercaptoopenpin1-2anddisablethis

function.

Support Wake-Up

by Keyboard Enable Disable* (*Default)

JP12 Setting EnableWake-up

by Keyboard or

Mouse function

(short pin 1-2)

DisableWake-up

by Keyboard or

Mouse function

(open pin 1-2)

Important: When using the PS/2 Keyboard Wake-Up function, please make sure the

ATX power supply can take at least 720mA load on the 5V Standby lead (5VSB) to

meet the standard ATX specifications.

SY-6KL

Quick Start Guide

Hardware

Installation

Step 6. Clear CMOS Data (JP5)

CleartheCMOSmemorybymomentarilyshortingpin2-3onjumperJP5foratleast5

seconds,andthenbyshortingpin1-2toretainnewsettings. Thisjumpercanbeeasily

identifiedbyitswhitecoloredcap.

CMOS Clearing Clear CMOS Data Retain CMOS Data (Default)

JP5 Setting Short pin 2-3 for

at least 5 seconds

to clear the CMOS.

Short pin 1-2

to retain the

new settings.

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.

SY-6KL Quick Start Guide

Quick BIOS

Setup

Quick BIOS Setup

ThismainboarddoesnotuseanyhardwarejumperstosettheCPUfrequency.Instead,

CPUsettingsaresoftwareconfigurablewiththeBIOS

[CHIPSETFEATURESSETUP].

Afterthehardwareinstallationiscomplete,turnthepowerswitchon, thenpress the

<DEL>

key

duringthesystemdiagnostic checksto entertheAwardBIOSSetupprogram.The CMOS

SETUPUTILITYwilldisplayonscreen.Then,followthesestepsto configurethe CPUsettings.

Step 1. Select [LOAD SETUP DEFAULT]

Selectthe“LOADSETUPDEFAULT”menuandtype “Y”attheprompttoloadtheBIOS

optimalsetup.

Step 2. Select [STANDARD CMOS SETUP]

Set[Date/Time]and[Floppydrivetype],thenset[Hard DiskType]to “Auto”.

Step 3. Select [CHIPSET FEATURES SETUP]

Movethecursortothe

[CPUSpeed]

fieldtosettheCPUfrequency.

Available[CPUSpeed]settingsonyourSY-6KL Mainboardaredetailedinthefollowing

table.Ifyousetthisfieldto[Manual],youarethenrequiredtofillinthenexttwoconsecutive

fields:(1)the[CPUHostClock],and(2)the[CPURatio].

CPU Speed

233MHz (66 x 3.5)

266MHz (66 x 4.0)

300MHz (66 x 4.5)

333MHz (66 x 5.0)

366MHz (66 x 5.5)

Select the working frequency of your

Pentium®

II processor among these

preset values.

Note: Mark the checkbox that

corresponds to the working frequency of

your Pentium®

II processor in case the

CMOS configuration should be lost.

Step 4. Select [SAVE & EXIT SETUP]

Press

<Enter>

tosavethenewconfigurationtotheCMOSmemory,andcontinuetheboot

sequence.

Table des matières

Autres manuels SOYO Carte mère

SOYO

SOYO SY-P4X400 DRAGON Lite Manuel utilisateur

SOYO

SOYO 5XBE5 Manuel d'utilisation et d'entretien

SOYO

SOYO SY-P4ISR Manuel utilisateur

SOYO

SOYO SY-6KE Manuel utilisateur

SOYO

SOYO 6KF Manuel d'utilisation et d'entretien

SOYO

SOYO SY-7IWM Manuel utilisateur

SOYO

SOYO SY-K7ADA Manuel utilisateur

SOYO

SOYO SY-D6IBA Manuel d'utilisation et d'entretien

SOYO

SOYO SY-K7AIA Manuel utilisateur

SOYO

SOYO SY-P4I845PE Manuel utilisateur

SOYO

SOYO 6BE+ Manuel utilisateur

SOYO

SOYO SY-P4I875P DRAGON 2 V1.0 Manuel utilisateur

SOYO

SOYO SY-6BB Manuel utilisateur

SOYO

SOYO SY-K7V DRAGON Plus Manuel utilisateur

SOYO

SOYO SY-6IEM Manuel utilisateur

SOYO

SOYO 82430 TX Manuel d'utilisation et d'entretien

SOYO

SOYO SY-7IZB Manuel utilisateur

SOYO

SOYO SY-5EH5 Manuel d'utilisation et d'entretien

SOYO

SOYO 5ehm Manuel utilisateur

SOYO

SOYO Super 7 SY-5EMA+ Manuel d'utilisation et d'entretien

SOYO

SOYO 5EA5 Manuel d'utilisation et d'entretien

SOYO

SOYO SY-P4VGA Manuel utilisateur

SOYO

SOYO SY-K7VMP Manuel utilisateur

SOYO

SOYO 6KB 82440 LX Manuel d'utilisation et d'entretien

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur