SMART-AVI HDR-16x16 Plus V3-S Manuel utilisateur
HDR-16x16 Plus V3
User Manual
16 Port 4K 30Hz HDMI Matrix Switch
www.smartavi.com
Tel: (800)AVI-2131 (702) 800-0005
2455WCheyenneAve, Suite 112
North LasVegas, NV89032
Table of Contents
TABLE OF CONTENTS / WHAT'S IN THE BOX? 2
INTRODUCTION 3
FEATURES 3
APPLICATIONS 3
TECHNICAL SPECIFICATIONS 4
HARDWARE INSTALLATION 5
VOLTAGE WARNING 6
FRONT PANEL CONTROL 7
ESTABLISHING AN RS-232 CONNECTION 8
USING THE SmartControl SOFTWARE 9-11
Using TCP/IP Control 12-13
LIMITED WARRANTY STATEMENT 14
WHATS IN THE BOX?
Model Number Descripon
HDR-16x16 Plus V3-S 16 Port HDMI Matrix Switch, Power Cord, Manual
NOTICE:
The informaon contained in this document is subject to change without noce. Smart-AVI makes no warranty of any kind with regard to this material,
including but not limited to, implied warranes of merchantability and tness for any parcular purpose. Smart-AVI will not be liable for errors contained
herein or for incidental or consequenal damages in connecon with the furnishing, performance or use of this material. No part of this document may be
photocopied, reproduced or translated into another language without prior wrien consent from Smart-AVI.
The HDR-16x16 Plus V3 conforms to the HDMI (High Denion Media Interface) standard with HDCP compliance and pro-
vides a connecon to view any of sixteen HDMI video sources on any combinaon of sixteen video displays. The HDR-16x16
Plus V3 provides HDMI output up to 40 feet away at resoluons up to 3840x2160 (4k) @30Hz. The system works with Blu-
ray players, TiVo systems, HTPCs, and satellite set-top boxes that connect to an HDMI display. Users can switch to any source
locally using the Front Panel or remotely via RS-232 with Windows®-based soware that is easy to understand and simple to
use, a cornerstone of all SmartAVI products. It can also be controlled via TCP/IP.
• 4K 30Hz HDMI 16x16 router switches 16 HDMI inputs with 16 HDMI outputs
• Sources can be routed independently to displays
• Switching controlled via the front panel, RS-232 and TCP/IP
• Supports high denion video resoluons of 720p, 1080i, 1080p and 3840x2160 (4k) @ 30Hz
• Supports 7.1 Digital Surround Sound Audio
• HDCP and HDMI 1.4 compliant
• Supports EDID for total control of compliant displays
• Learn EDID from any display
• Delivers uncompressed digital video with zero signal loss
• Outputs HDMI up to 40 feet (with high quality acve cables)
• Rack-mountable
•Wall Displays
• Digital Signage
• Airports
• Dealer Rooms
• Control Rooms
• Audio/Visual Presentaons
• Shopping Centers
• Security
• Point-of-Sale
• Hotels/Resorts
APPLICAtions:
fEATURES:
introduction
technical specifications:
VIDEO
HDTV Resoluons 480p, 720p, 1080i, 1080p and 3840x2160 (4k) @30Hz
SDTV Resoluons 480i
Input Interface (TX) (16) HDMI Type A 19-pin Female TMDS
Output Interface (RX) (16) HDMI Type A 19-pin Female TMDS
Input Cable Length Up to 40 .
Output Cable Length Up to 40 .
OTHER
Warranty Limited 1 Year Parts and Labor
Power Internal 100-240 VAC
Dimensions 17”W x 7 1/8”H x 15”D
Front Panel is 19” wide to t a 19” rack
Weight 24.45 lbs. (Unit only)
ENVIRONMENTAL
Operang Temp. 0 to +40° C (+32° to 104° F)
Storage Temp. -20° to +60° (+20° to +140° F)
Operang Humidity 10% to 85% (Non-condensing)
Storage Humidity 10% to 85% (Non-condensing)
CONTROL
Front Panel Buons & LCD Display
RS-232 DB9 Female, 9600 bps, N, 8 1, No ow control
TCP/IP On-Board LAN
HDR-16x16 Plus
V3 Front
1. Turn o all input devices and displays.
2. Connect male to male HDMI cables to the input devices or sources and the “IN” ports on the
HDR-16x16 Plus V3.
3. Connect the displays to the “OUT” ports on the HDR-16x16 Plus V3.
4. Power on the input devices and the displays.
5. Connect the power cord and power-on the HDR-16x16 Plus V3.
IMPORTANT:
Each input and output can support up to 10mA/5VDC.
Do not connect extenders that are powered by HDMI.
hardware installation
HDR-16x16 Plus
V3 Rear
The top power-plug is 230V and is intend-
ed for use within the EU or countries where
230V is the standard. Please check all volt-
ages and inputs before proceeding with
powering on the unit.
The boom power-plug is 115V and is in-
tended for the United States or countries
where 110-115V is the standard. Please
check all voltages and inputs before pro-
ceeding with powering on the unit.
There are mulple ways to control the HDR-16x16 Plus V3: via the front panel, via RS-232 using the
SmartControl soware, via RS-232 commands (with AMX, Crestron), and with a TCP-IP module.
FRONT PANEL CONTROL
Input and output are relave to the HDR-16x16 Plus V3. Output refers to displays or monitors. Input re-
fers to video sources such as DVD players or computers.
During normal operaon, you will see a list of ports on the front panel display. See Figure 6-2.
DEFAULT DISPLAY HDR-16x16 Plus V3
Display Input Status: This displays the status of the inputs. If no input is present, the display will read
NONE.
To select INPUT/OUTPUT for display: Press the desired number into the Out Select row; for example
Monitor 1 will be “01”; Once you have selected the output, enter the desired input from the In Select row
(boom row), then press TAKE to conrm.
PANEL LOCK: This mode prevents any buon commands from being entered while the PANEL LOCK is
acve. Press the PANEL LOCK buon again to disable the LOCK.
Before you start:
Controlling a Smart-AVI device via RS-232 requires an RS-232 card installed on your computer or a USB
to RS-232 adapter. Below are instrucons on how to create an RS-232 connecon between a PC and the
Smart-AVI device.
Use terminal client soware such as the PuTTY to connect to the Smart-AVI device. Make sure to use
communicaon sengs 9600 bps, N, 8, 1, No ow control.
Check the device and your PC to determine if you need a male to male or a male to female cable and how
long it needs to be. The Smart-AVI device requires a straight through cable. You can use a Null Modem
Adapter to convert a crossed cable to a straight through cable. Examples of crossed and straight thorough
cable pin-outs are shown below. The standard maximum length for an RS-232 cable is 50 feet. Call our
Smart-AVI Support Engineer if you require more informaon.
ESTABLISHING AN RS-232 CONNECTION
Establish a connecon to the Smart-AVI device:
1. Connect an RS-232 cable to the RS-232 connec-
tor on the PC.
2. Connect the other end of the cable to the RS-232
port of the Smart-AVI device.
3. Use Windows Control Panel / Device Manager to
idenfy the Com port number. See instrucons and
Figure 9-2 below.
4. Power on the device.
If you are using a USB to COM port adapter on a
Windows PC and need to idenfy the COM port
used, do the following:
1. Click on the start buon.
2. Click on Control Panel.
3. Click on Device Manager.
4. Click on the arrow next to Ports (COM & LPT).
You should see the name of your adapter and the
COM port number in use.
RS-232: Controlling the HDR-16x16 Plus V3 has never been simpler with SmartControl soware. With
SmartControl, you can assign a unique name to each port on the HDR-16x16 Plus V3, as well as each
display, customizing projects to meet your needs. Although all the funcons of the matrix are available
locally on the front panel of the HDR-16x16 Plus V3, using SmartControl allows for customizaon of all
the matrix funcons.
• Download the Smart Control Pro soware from the Smart-AVI website. www.smartavi.com
• Double click SmartControlPro-v5-0-03_Installer.exe in order to iniate soware installaon.
• Click Install. Aer installaon has completed, click CLOSE.
• In order to use the soware, click on the START buon>Programs>SmartControl Pro.
• There you should see a help le, the SmartControl Pro launcher as well as a shortcut to uninstall
SmartControl Pro.
Click on SmartControl Pro in order to launch the soware. When the soware starts you will see a
screen like this:
using the smartcontrol software
Advanced Conguraon:
If you have more than one
Router installed you will
want to check this box.
Router Type:
Select HDR-16x16 Plus V3
Inputs/Outputs:
Enter the number of Inputs/Outputs
your HDR-16x16 Plus V3 has.
The HDR-16x16 Plus V3 can have up
to 16 inputs and 16 outputs.
Com Port:
Select the appropriate com port that your computer is using to access the router.
To nd the com port number that your computer is using click on the Start Menu. Right click on computer.
Click on Properes. Click on Device Manager. Click on the symbol next to Ports (COM & LPT). Your com
port number should be listed here.
Router Time out:
This eld is set to 0 by default, meaning the computer acknowledges commands almost instantly. Some-
mes a computer takes longer to respond. This seng should be le at 0. If you need to change it, it
should be no higher than 0.2.
Aer you have entered in the necessary informaon click OK. This will now take you to the Main Roung
Window where you can route the dierent video/audio connecons.
using the smartcontrol software
Main Roung Window
The Main Roung Window enables you to control the router(s) connecons by means of the Crosspoint
panel, the buon panel, or with pre-recorded routes called macros.
Crosspoint Panel: This is the simplest way to route the connecons. Simply click on the cross point itself.
The input on the le will then be routed to the output above.
Note: Inputs can be routed to several dierent outputs, but each output can only have a single input.
On the screen shown in gure 11-1 the input buons run down the le side and the output buons run
across the top. They’re each labeled 1 through 16. This conguraon directs video from source 1 to be
displayed on all 16 displays
Table des matières
Autres manuels SMART-AVI Changer
SMART-AVI
SMART-AVI DVN-4DUO Manuel utilisateur
SMART-AVI
SMART-AVI SM-UHN-8S Manuel utilisateur
SMART-AVI
SMART-AVI HDMV16X-PLUS-S Manuel utilisateur
SMART-AVI
SMART-AVI SKM-04-LT-S Manuel utilisateur
SMART-AVI
SMART-AVI SM3-UHX-2D Manuel utilisateur
SMART-AVI
SMART-AVI SM-DVN-4S Manuel utilisateur
SMART-AVI
SMART-AVI DVR8X8 Manuel utilisateur
SMART-AVI
SMART-AVI HDMV Manuel utilisateur
SMART-AVI
SMART-AVI DVN-4QUAD-DL Manuel utilisateur
SMART-AVI
SMART-AVI HDN-4DUO-S Manuel utilisateur
SMART-AVI
SMART-AVI SM-DPN-4S Manuel utilisateur
SMART-AVI
SMART-AVI QKVMPro Manuel utilisateur
SMART-AVI
SMART-AVI DVNET-4Duo-DL Manuel utilisateur
SMART-AVI
SMART-AVI SM-DPN-4D Manuel utilisateur
SMART-AVI
SMART-AVI HR2P Manuel utilisateur
SMART-AVI
SMART-AVI DVN-16Pro Manuel utilisateur
SMART-AVI
SMART-AVI UHDN-4P Duo Manuel utilisateur
SMART-AVI
SMART-AVI SM-DVN Series Manuel utilisateur
SMART-AVI
SMART-AVI SM-HDN-4D Manuel utilisateur
SMART-AVI
SMART-AVI D2H-4P Duo Manuel utilisateur
