SMAR TP302 Guide d'installation

FIELDBUS POSITION

TRANSMITTER

T 302P

VERSION 3

JUL / 16

OPERATION, MAINTENANCE

AND INSTRUCTIONS MANUAL

TP302ME

web: www.smar.com/contactus.asp

www.smar.com

Specifications and information are subject to change without notice.

Up-to-date address information is available on our website.

smar

Kpvtqfwevkqp"

KKK"

INTRODUCTION

The TP302 is from the first generation of Fieldbus devices. It is a transmitter for position

measurements. It can measure displacement or movement of rotary or linear type. The TP302 reads

the position and makes it available to Fieldbus system. The digital technology and communication

provide an easy interface between the field and control room and several interesting features that

considerably reduce the installation, operation and maintenance costs.

The TP302 is part of Smar's complete 302 line of Foundation Fieldbus devices.

Fieldbus is not only a replacement for 4-20 mA or intelligent/smart transmitter protocols. It contains

much more. Fieldbus is a complete system enabling distribution of the control function to equipment

in the field.

Some of the advantages of bi-directional digital communications are known from existing smart

transmitter protocols: Higher accuracy, multi-variable access, remote configuration and diagnostics,

and multi-dropping of several devices on a single pair of wires.

Some of the disadvantages, in comparison to 4-20 mA technology, are communication speed too

low for closed loop control, poor inter-operability between devices of different type and

manufacturer. Others: not possible to pass data direct from one device to another (peer-to-peer

communication).

The main requirement for Fieldbus was to overcome these problems. Closed loop control with

performance like a 4-20 mA system requires higher speed. Since higher speed means higher power

consumption, this clashes with the need for intrinsic safety. Therefore, a moderately high

communication speed was selected, and the system was designed to have minimum

communication overhead. Using scheduling so as the system controls variable sampling, algorithm

execution and communication to optimize the usage of the network, not loosing time. Thus

achieving high closed loop performance is achieved.

Using Fieldbus technology, with its capability to interconnect several devices, very large control

schemes can be constructed. In order too be user friendly the function block concept was introduced

(users of Smar CD600 should be familiar with this, since it was implemented several years ago).

The user may now easily build and overview complex control strategies. Another advantage is

adding flexibility, the control system may be edited without having to rewire or change the hardware.

The need for implementation of Fieldbus in small as well as large systems was considered when

developing the entire 302 line of Fieldbus devices. They have the common features of being able to

act as a master on the network and be configured locally using a magnetic tool, eliminating the need

for a configurator or console in many applications.

The TP302, like the rest of the 302 family, has several Function Blocks built in, like PID controller,

Input Selector and Splitter/Output selector, eliminating the need for a separate device. This takes to

reduced communication and thereby less dead-time and tighter control, not to mention the reduction

in cost.

NOTE

Get the best results of the TP302 by carefully reading these instructions.

VR524"⁄"Qrgtcvkqp."Ockpvgpcpeg"cpf"Kpuvtwevkqpu"Ocpwcn"

KX"

NOTE

This manual is compatible with version 3.XX, where 3 denotes software version and XX software release.

The indication 3.XX means that this manual is compatible with any release of software version 3.

Waiver of responsibility

The contents of this manual abides by the hardware and software used on the current equipment

version. Eventually there may occur divergencies between this manual and the equipment. The

information from this document are periodically reviewed and the necessary or identified corrections

will be included in the following editions. Suggestions for their improvement are welcome.

Warning

For more objectivity and clarity, this manual does not contain all the detailed information on the

product and, in addition, it does not cover every possible mounting, operation or maintenance

cases.

Before installing and utilizing the equipment, check if the model of the acquired equipment complies

with the technical requirements for the application. This checking is the user’s responsibility.

If the user needs more information, or on the event of specific problems not specified or treated in

this manual, the information should be sought from Smar. Furthermore, the user recognizes that the

contents of this manual by no means modify past or present agreements, confirmation or judicial

relationship, in whole or in part.

All of Smar’s obligation result from the purchasing agreement signed between the parties, which

includes the complete and sole valid warranty term. Contractual clauses related to the warranty are

not limited nor extended by virtue of the technical information contained in this manual.

Only qualified personnel are allowed to participate in the activities of mounting, electrical connection,

startup and maintenance of the equipment. Qualified personnel are understood to be the persons

familiar with the mounting, electrical connection, startup and operation of the equipment or othe

similar apparatus that are technically fit for their work. Smar provides specific training to instruct and

qualify such professionals. However, each country must comply with the local safety procedures,

legal provisions and regulations for the mounting and operation of electrical installations, as well as

with the laws and regulations on classified areas, such as intrinsic safety, explosion proof, increased

safety and instrumented safety systems, among others.

The user is responsible for the incorrect or inadequate handling of equipments run with pneumatic

or hydraulic pressure or, still, subject to corrosive, aggressive or combustible products, since thei

utilization may cause severe bodily harm and/or material damages.

The field equipment referred to in this manual, when acquired for classified or hazardous areas, has

its certification void when having its parts replaced or interchanged without functional and approval

tests by Smar or any of Smar authorized dealers, which are the competent companies for certifying

that the equipment in its entirety meets the applicable standards and regulations. The same is true

when converting the equipment of a communication protocol to another. In this case, it is necessary

sending the equipment to Smar or any of its authorized dealer. Moreover, the certificates are

different and the user is responsible for their correct use.

Always respect the instructions provided in the Manual. Smar is not responsible for any losses

and/or damages resulting from the inadequate use of its equipments. It is the user’s responsibility to

know and apply the safety practices in his country.

Vcdng"qh"Eqpvgpvu"

TABLE OF CONTENTS

UGEVKQP"3"/"KPUVCNNCVKQP"0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"303"

GENERAL ......................................................................................................................................................................................1.1

MOUNTING....................................................................................................................................................................................1.1

ELECTRONIC HOUSING ROTATION ...........................................................................................................................................1.7

ELECTRIC WIRING .......................................................................................................................................................................1.7

BUS TOPOLOGY AND NETWORK CONFIGURATION ................................................................................................................1.8

JUMPER CONFIGURATION .......................................................................................................................................................1.10

POWER SUPPLY ........................................................................................................................................................................1.10

RECOMMENDATIONS FOR MOUNTING APPROVED EQUIPMENTS WITH THE IP66/68 W CERTIFICATIONS (“W"

INDICATES CERTIFICATION FOR USE IN SALINE ATMOSPHERES) .....................................................................................1.10

ROTARY AND LINEAR MAGNET ...............................................................................................................................................1.10

REMOTE POSITION SENSOR....................................................................................................................................................1.11

INSTALLATION IN HAZARDOUS AREAS...................................................................................................................................1.12

EXPLOSION/FLAME PROOF......................................................................................................................................................1.12

INTRINSICALLY SAFE ................................................................................................................................................................1.12

UGEVKQP"4"/"QRGTCVKQP"000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"403"

FUNCTIONAL DESCRIPTION – HALL SENSOR ..........................................................................................................................2.1

FUNCTIONAL DESCRIPTION – ELECTRONICS .........................................................................................................................2.1

UGEVKQP"5"/"EQPHKIWTCVKQP"000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"503"

TRANSDUCER BLOCK .................................................................................................................................................................3.1

HOW TO CONFIGURE THE TRANSDUCER BLOCK ...................................................................................................................3.1

POSITION FIELDBUS TRANSDUCER..........................................................................................................................................3.1

PARAMETERS TABLE ..................................................................................................................................................................3.2

CALIBRATION ...............................................................................................................................................................................3.3

POSITION TRIM ............................................................................................................................................................................3.4

VIA LOCAL ADJUSTMENT............................................................................................................................................................3.5

DISPLAY TRANSDUCER BLOCK .................................................................................................................................................3.6

DEFINITION OF PARAMETERS AND VALUES............................................................................................................................3.6

PROGRAMMING USING LOCAL ADJUSTMENT .......................................................................................................................3.10

BLOCK TYPE AVAILABILITY AND INITIAL BLOCK SET............................................................................................................3.12

TABLE OF POINTS - LINEARIZATION .......................................................................................................................................3.13

UGEVKQP"6"/"OCKPVGPCPEG"RTQEGFWTGU"00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"603"

GENERAL ......................................................................................................................................................................................4.1

RECOMMENDATIONS FOR MOUNTING APPROVED EQUIPMENT WITH THE IP66/68 W CERTIFICATIONS (“W" INDICATES

CERTIFICATION FOR USE IN SALINE ATMOSPHERES) ...........................................................................................................4.1

DISASSEMBLY PROCEDURE ......................................................................................................................................................4.2

REASSEMBLY PROCEDURE .......................................................................................................................................................4.3

UPGRADING TP301 TO TP302 ....................................................................................................................................................4.4

ACCESSORIES .............................................................................................................................................................................4.4

EXPLODED VIEW .........................................................................................................................................................................4.5

SPARE PARTS LIST......................................................................................................................................................................4.6

UGEVKQP"7"/"VGEJPKECN"EJCTCEVGTKUVKEU"00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"703"

FUNCTIONAL SPECIFICATIONS .................................................................................................................................................5.1

PERFORMANCE SPECIFICATIONS.............................................................................................................................................5.1

PHYSICAL SPECIFICATIONS.......................................................................................................................................................5.1

ORDERING CODE.........................................................................................................................................................................5.2

CRRGPFKZ"C"/"EGTVKHKECVKQPU"KPHQTOCVKQP"000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"C03"

EUROPEAN DIRECTIVE INFORMATION............................................................................................................................. A.1

HAZARDOUS LOCATIONS GENERAL INFORMATION .................................................................................................... A.1

HAZARDOUS LOCATIONS APPROVALS ............................................................................................................................ A.2

IDENTIFICATION PLATE......................................................................................................................................................... A.5

CONTROL DRAWING .............................................................................................................................................................. A.7

CRRGPFKZ"D"⁄"UTH"⁄"UGTXKEG"TGSWGUV"HQTO"00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"D03"

RETURNING MATERIALS............................................................................................................................................................ B.2

VR524"⁄"Qrgtcvkqp."Ockpvgpcpeg"cpf"Kpuvtwevkqpu"Ocpwcn"

XK"

puvc

qp"

qye

ctv

Has the transmitter

been configured

in bench for the

application ?

Configure the transmitter

( Section 1 and Section 3).

Start

Field Installation.

Install the transmitter according

to the application.

Verify area classification and

its respective practices.

YES

Configure Fail Safe value

(Section 3).

Configure Damping (Section 3).

Configure the indication in

local Indicator (Section 3).

Configure the user unit in case

of specific measurements.

(Section 3)

Is the measurement

OK ?

YES

the

measuring ok

Using the GSD file, configure

the cyclic data in the system

configuration tool (Section 3)

YES

Consult the manual

Section 4 - Maintenance.

Consult the manual

Section 4 - Maintenance.

Dislocate the system to

upper position, execute the

upper position trim for 100%.

Dislocate the system to

lower position, execute the

lower position trim for 0%.

Power the transmitter.

Fix the transmitter magnet

in a position that allows to the

sensor to travel all magnet range.

Verify the most appropriate

position for local indicator.

Section 1

1.1

INSTALLATION

General

NOTE

The installation carried out in hazardous areas should follow the recommendations of the IEC60079-14 standard.

The overall accuracy of measurement and control depends on several variables. Although the

converter has an outstanding performance, proper installation is essential, in order to maximize its

performance.

Among all factors, which may affect converter accuracy environmental conditions are the most

difficult to control. There are, however, ways of reducing the effects of temperature, humidity and

vibration.

In warm environments, the transmitter should be installed to avoid, as much as possible, direct

exposure to the sun. Installation close to lines and vessels subjected to high temperatures should

also be avoided.

Use of sunshades or heat shields to protect the transmitter from external heat sources should be

considered, if necessary.

Humidity is fatal to electronic circuits. In areas subjected to high relative humidity, the o-rings for the

electronics cover must be correctly placed. Removal of the electronics cover in the field should be

reduced to the minimum necessary, since each time it is re-moved; the circuits are exposed to the

humidity.

The electronic circuit is protected by a humidity proof coating, but frequent exposures to humidity

may affect the protection provided. It is also important to keep the covers tightened in place. Every

time they are removed, the threads are exposed to corrosion, since painting cannot protect these

parts. Code approved sealing methods on conduit entering the transmitter should be employed.

Although the transmitter is virtually insensitive to vibration, installation close pumps, turbines or

other vibrating equipment should be avoided.

Mounting

The TP302 mounting depends on the type movement, linear or rotary. Two brackets are required for

mounting, one for the magnet and the other for the transmitter itself.

NOTE

Make sure that arrow engraved on the magnet coincides with the arrow engraved on the Position Transmitter

when the system is in mid travel. When mounting the the Position Transmitter, consider that:

1 . There is no attrict between the internal magnet face and the position sensor salience all over the travel

(rotary or linear).

2. A minimum distance of 2 mm to of 4 mm distance is recommended between the magnet external face

and the Position Transmitter face.

Should the transmitter installation change, or magnet change, or should any other modification, the

transmitter will require a re-calibration.

IMPORTANT

If the self diagnostics detect a transmitter failure, for example the loss of the power, the analog signal will go

to 3.9 mA or to 21.0 mA to alert the user (High or low alarm signal is user selectable).

TP302 – Operation, Maintenance and Instructions Manual

1.2

The following Figures 1.1 and 1.3 show both linear and rotary typical mounting:

Rotary Movement

Install the magnet on the valve stem using the magnet mounting bracket.

ROTATY

MAGNET

BRACKET

VALVE

STEM

ROTARY

MAGNET POSITIONER

TRANSMITTER

POSITIONER

TRANSMITTER

BRACKET

Figure 1.1 – Transmitter on a Rotary Actuator

BRACKET FOR REMOTE

SENSOR

REMOTE SENSOR

REMOTE POSITION

TRANSMITTER

M6 x 1SCREWS

(2 PLACES)

“L” BRACKET WITH “U” CLAMP FOR

REMOTE POSITION TRANSMITTER.

Figure 1.2 – Position Transmitter on Rotary Actuator with Remote Position Sensor

Installation

1.3

Linear Movement

Install the magnet on the valve stem using the magnet mounting bracket.

The linear magnet movement must be orthogonal in relation to the main axis of the position

transmitter. For example, if the linear magnet movement is vertical, the transmitter main axis must

be horizontal, as show in Figure 1.3.

Magnet Bracket

Linear

Valve Yoke

Valve Stem

Linear Magnetic

Centralizer Gadget Linear

Position Transmitter

M6 x 25 Screw

Position Trasmitter Bracket

with Clamp “L”

“U”

Figure 1.3 - Transmitter on a Linear Actuator

TP302 – Operation, Maintenance and Instructions Manual

1.4

CENTRALIZER

DEVICE

VALVE

STEM

VALVE YOKE

LINEAR

MAGNET

REMOTE

SENSOR

“L” BRACKET WITH “U” CLAMP

FOR REMOTE SENSOR

REMOTE POSITION

TRANSMITTER

LINEAR MAGNET

BRACKET

M6 x 1 SCREWS

(2 PLACES)

M6x1 SCREWS

(2 PLACES)

“L” BRACKET WITH “U”

CLAMP FOR REMOTE

POSITION TRANSMITTER

Figure 1.4 – Position Transmitter on Linear Actuator with Remote Position Sensor

Table des matières

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur