SIIG JJ-PCM012-S2 Manuel utilisateur
1
Single-Serial PC Card
Quick Installation Guide
04-0575B
Introducing the Single-Serial PC Card
The Single-Serial PC Card adds one high-speed serial port
(RS232) into your notebook computer to connect various
types of serial devices.
Keys Features and Benefits
• Works with notebook PC with a PCMCIA or Type
II/III PC Card slot
• 16650 UART supports baud rate up to 115.2Kbps
• Built-in 16-byte FIFO buffer to speed up data
transfers
• Works with various RS232 serial devices including
modems, PDAs, label printers, bar code scanners,
and more
• RoHS compliant
System Requirements
•Pentium or equivalent notebook computer with an
available PC Card slot
•Windows® 7 (32-bit) / Vista (32-bit) / Server 2003 &
2008 (32-bit) / XP (32-bit) / 2000 / ME / 98SE / 98
PackageContents
•Single-Serial PC Card
•Driver CD
•Quick installation guide
2
Layout
Serial Port
(9-pin)
PC Card
Connector
Figure 1: Single-Serial PC Card Layout
Hardware Installation
General instructions for installing the card are provided
below. Since the design of notebook computers may
vary, refer to your system’s reference manual for further
information, if needed.
1. Power off your notebook computer and any other
connected peripheral devices.
2. Insert the PC Card into the PC Card slot of your
notebook computer with its PC Card Connector
facing the slot. Make sure it is inserted all the way
in for a solid connection.
3. Power on your notebook computer.
3
Driver Installation
Windows 7 (32-bit)
1. Right click Computer, click Manage, then click
Device Manager.
2. Right click AVLAB PCMCIA_RS232_550, click
Update Driver Software.
3. Insert the driver CD, click Browse my computer for
driversoftware. ClosetheAutoPlay boxifprompted.
4. Type D:\, click Next. (Change D: to match your
CD/DVD-ROM drive letter)
5. Click Install this driver sofware anyway.
6. At Widows has successfully updated your driver
software, click Close to complete the installation.
Windows Vista (32-bit)
1. At the Found New Hardware window, click Locate
and install driver software (recommended), then
click Continue.
2. Click I don't have the disc. Show me other options.
3. Insert the driver CD, click Browse my computer for
driver software (advanced).
4. TypeD:\,thenclickNext. (ChangeD: tomatchyour
CD/DVD-ROM drive letter)
5. Click Install this driver software anyway.
6. Click Close to complete the installation.
Windows XP (32-bit) / Server 2003 (32-bit)
1. At the Found New Hardware Wizard,
XP (w/SP1 or earlier) / Server 2003: Go to step #2.
XP(w/SP2orlater)/ Server 2003 (w/SP1orlater):Select
No, not this time, click Next.
4
2. Insert the driver CD.
3. Select Install the software automatically,then click
Next.
4. If the Hardware Installation window pops up, click
Continue Anyway.
5. Click Finish to complete the installation.
Windows Server 2008 (32-bit)
1. At the Found New Hardware Wizard, click Locate
and install driver Software (recommended).
2. Click Don't search online.
3. Insert the driver CD when prompted.
4. Click Install this driver software anyway.
5. Click Close to complete the installation.
Windows 2000
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended), and click Next.
3. Insert the driver CD.
4. Check CD-ROM drives, uncheck the other boxes,
and click Next.
5. Click Next and Finish to complete the installation.
Windows ME
1. At the Add New Hardware Wizard, choose
Automatic search....
2. Insert the driver CD.
3. Click Next, then click Finish.
4. Restart Windows to complete the installation.
5
Windows 98SE / 98
1. At the Add New Hardware Wizard, click Next.
2. Select Search for the best driver for your device
(Recommended), then click Next.
3. InsertthedriverCD,checkCD-ROMdrives,uncheck
the other boxes, and click Next.
4. Click Next, then click Finish.
5. Restart Windows to complete the installation.
To Verify Windows Installation
1. UseDeviceManagertoverify successfulinstallation.
For Windows 7: Right click Computer, click Manage,
click Device Manager.
For Windows Vista: Right click Computer, click
Manage, click Continue, click Device Manager.
For Windows XP / Server 2003 / 2000: Right click My
Computer, click Manage, click Device Manager.
For Windows Server 2008: Right click Computer, click
Manage, double click Diagnostics, click Device
Manager.
For Windows ME / 98SE / 98: From the main desktop,
right click My Computer, then click Properties.
Click Device Manager tab.
2. Click on the +(plus sign) in front of Ports (COM &
LPT), PCMCIA-RS232_550 (COM...) should be
displayed.
6
Changing COM Port Number
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting. This option is only for Windows 7,
Vista, XP, Server 2003 & 2008, and 2000.
1. From the Device Manager window, double click
Ports (COM & LPT), then double click PCMCIA
RS232-550 ... .
2. Click Port Settings tab, then click Advanced.
3. Clickthedownarrownext to theCOMPort Number
box and select a COM port that is not in use. Click
OK.
4. Click OK again, then close Device Manager to save
the changes.
Removing the PC Card
BeforeejectingtheSingle-Serial PCCard fromthecomputer,
first use the Safely Remove Hardware utility to stop it.
Not following the steps below could lead to system
crashes, data corruption or data loss.
1. For Windows 7: Click the Safety Remove Hardware
and Eject Media icon located in the taskbar.
2. For Windows Vista / XP / Server 2003 & 2008 / 2000:
Click the Safely Remove Hardware icon located in
the taskbar by the system clock.
3. For Windows ME / 98SE / 98: Click the Unplug or
Eject Hardware icon located in the taskbar by the
system clock.
4. Click Stop PCMCIA-RS232_550 (COM...) or Safely
remove PCMCIA-RS232_550 (COM...).
5. At the Safe To Remove Hardware box, the Single-
Serial PC Card can be ejected from the computer.
7
Technical Support and Warranty
QUESTIONS? SIIG’sOnline Support has answers! Simplyvisit our
web site at www.siig.com and click Support. Our online support
database is updated daily with new drivers and solutions. Answers
toyour questionscould bejust afewclicks away. Youcan alsosubmit
questions online and a technical support analysts will promptly
respond.
SIIGoffersalifetime manufacturer warrantywiththis product. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased from.
B) Ifyour purchasehas passedthe store's returnpolicy period,please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. Your RMA request will be processed, if the
product is determined to be defective, an RMA number will be
issued.
Step 2: After obtaining an RMA number, ship the product.
•Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
•Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
Single-Serial PC Card is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of
SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other
names used in this publication are for identification only and may be trademarks of their respective
owners.
March, 2010 Copyright © 2010 by SIIG, Inc. All rights reserved.
PRODUCT NAME
Single-SerialPCCard
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by
adding A/V and Digital Signage connectivity solutions to our extensive
portfolio. Allcenteredaround the distribution and switching of A/V signals
overCAT5/6, theseproducts includematrix switches,distribution amplifiers,
extenders, converters, splitters, cabling, and more.
SIIG is the premier one-stop source of upgrades and is committed to
providing high quality products while keeping economical and competitive
prices. High-quality control standards are evident by one of the lowest
defective return rates in the industry. Our products offer comprehensive
user manuals, user-friendly features, and most products are backed by a
lifetime warranty.
SIIG products can be found in many computer retail stores, mail order
catalogs, and e-commerce sites in the Americas, as well as through major
distributors, system integrators, and VARs.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels SIIG Matériel informatique
SIIG
SIIG FireWire 800 ExpressCard Manuel utilisateur
SIIG
SIIG NN-403P12 Manuel utilisateur
SIIG
SIIG NN-EC2812-S1 Manuel utilisateur
SIIG
SIIG FireWire 800 + Hi-Speed USB Combo Manuel utilisateur
SIIG
SIIG NN-000032-S1 Manuel utilisateur
SIIG
SIIG SC-SAE512-S1 Manuel utilisateur
SIIG
SIIG Network Device EVTEK-5103 Guide d'installation
SIIG
SIIG SATA II-150 PCI Manuel utilisateur
SIIG
SIIG SC-SE6412 Manuel utilisateur
SIIG
SIIG SIIG 2-Port Serial 950-Value Manuel utilisateur
SIIG
SIIG DP SoundWave 4 Channel PCI Manuel utilisateur
SIIG
SIIG Serial ATA PCI RAID Manuel utilisateur
SIIG
SIIG CyberParallel Dual Manuel utilisateur
SIIG
SIIG ExpressCard/54 CF R/W Manuel utilisateur
SIIG
SIIG UltraATA 133 PCI Manuel utilisateur
SIIG
SIIG DP FireWire 800 3-Port PCIe Manuel utilisateur
SIIG
SIIG SoundWave 5.1 PCI-LP Manuel utilisateur
SIIG
SIIG USB 2.0+1394 DV Kit Manuel utilisateur
SIIG
SIIG SC-SAE312-S3 Manuel utilisateur
SIIG
SIIG 1394 Dual-Port CardBus Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
