Siemens XDACT-ASSY Manuel utilisateur

A6V10807278_enUS_b Siemens Industry, Inc.

Building Technologies Division

INSTALLATION INSTRUCTIONS

Model XDACT-ASSY

Assembly

INTRODUCTION

The Model XDACT-ASSY is an optional assembly that can be mounted on the inner doors next to a

PMI-2 or a PMI-3, or in the second row of inner doors of CAB2 and CAB3.

Parts Supplied:

1) Dialer bracket, q’ty = 1

2) Locknuts, q’ty = 2

3) Cable harness, q’ty = 1

4) 2-pos connector plug, q’ty = 1

5) Instruction sheet

PMI REAR

COVER

INNER DOOR

2-POS

CONNECTOR

PLUG

CABLE

HARNESS

DIALER

BRACKET

LOCKNUTS

(2) REQ’D

DIALER

MODEL FCA2015-U1

Figure 1 – Mounting the Dialer

A6V10807278_enUS_b

12-22 AWG

BLACK 12-22 AWG

RED

DIALER

FCA2015-U1

2-POS

CONNECTOR

PLUG POWER

PSC-12

TB3

POSITION 2

X102

POSITION 2

Figure 2 – Power Connection to Dialer

INSTALLATION

1. Remove all system power before installation, first battery then AC. To power up, connect the

AC first, then the battery.

2. Mount the dialer bracket in either row 1 or row 2 of the inner door, using the two locknuts

provided.

3. Mount the dialer Model FCA2015-U1, P/N S54400-A63-A1, on the bracket using the four

screws provided with the Dialer.

4. Remove the plastic rear cover of the PMI by removing only the four screws.

5. Connect the cable harness provided to the PMI connector header and to the Dialer.

6. Plug the 2-pos connector provided into the dialer as shown in Figure 2. Use two 12-22 AWG

wires to connect it to the power supply. Connect the black wire from connector TB3 “Position

2” to the connector on the dialer X102 “Position 2”. See Figure 2.

7. Reinstall the PMI rear cover that was removed in Step 4.

8. Refer to the FCA2015-U1 DACT Installation Instructions, Document ID A6V10334254, for more

information, including telephone connection wiring.

9. Apply power to the system.

10.Configure using Zeus programming tool.

NOTE: See the Zeus Quick-Start Manual, P/N 315-033875, for details on programming.

11.Check for proper operation.

A6V10807278_enUS_b

Cyber security disclaimer

Siemens products and solutions provide security functions to ensure the secure operation of building comfort,

fire safety, security management and physical security systems. The security functions on these products and

solutions are important components of a comprehensive security concept.

It is, however, necessary to implement and maintain a comprehensive, state-of-the-art security concept that

is customized to individual security needs. Such a security concept may result in additional site-specific

preventive action to ensure that the building comfort, fire safety, security management or physical security

system for your site are operated in a secure manner. These measures may include, but are not limited to,

separating networks, physically protecting system components, user awareness programs, defense in depth,

etc.

For additional information on building technology security and our offerings, contact your Siemens sales or

project department. We strongly recommend customers to follow our security advisories, which provide

information on the latest security threats, patches and other mitigation measures.

http://www.siemens.com/cert/en/cert-security-advisories.htm

Document ID A6V10807278_enUS_b P/N A5Q00069411

Table des matières

Autres manuels Siemens Unité de contrôle

Siemens

Siemens SIMOTICS CONNECT 400 Manuel utilisateur

Siemens

Siemens SINAMICS V20 Inverter Manuel utilisateur

Siemens

Siemens SIMOTICS CONNECT 400 Manuel utilisateur

Siemens

Siemens SITRANS RD500 Manuel utilisateur

Siemens

Siemens SIMATIC 6DL1131-6DF00-0PK0 Document technique

Siemens

Siemens SIMATIC 6DL1 136-6AA00-0PH1 Manuel utilisateur

Siemens

Siemens SINUMERIK 840D sl Manuel utilisateur

Siemens

Siemens IM 155-6 PN ST Document technique

Siemens

Siemens ASIsafe 3RK1205-0B.00 Manuel utilisateur

Siemens

Siemens HiPath optiPoint 410 Mode d’emploi

Siemens

Siemens VVP47 Series Manuel utilisateur

Siemens

Siemens 3VL92 Series Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SIMATIC IM 153-2 Manuel utilisateur

Siemens

Siemens WATCHDOG-Modul ET 200iSP Manuel utilisateur

Siemens

Siemens AP 641 Manuel de service

Siemens

Siemens SINAMICS S120 Manuel utilisateur

Siemens

Siemens Simatic S7-1500 Manuel utilisateur

Siemens

Siemens OMM-2 Manuel utilisateur

Siemens

Siemens LGB21.130A17 Manuel utilisateur

Siemens

Siemens EVG4U10E Series Manuel utilisateur

Siemens

Siemens SIMATIC TIM 3V-IE DNP3 Guide de l'utilisateur

Siemens

Siemens SIMATIC 6ES7135-4MB02-0AB0 Manuel utilisateur

Siemens

Siemens P Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur