Siemens Fujitsu D1159 Manuel utilisateur
Sie haben ...
... technische Fragen oder Probleme?
Wenden Sie sich bitte an:
• einen unserer Servicepartner
• Ihren zuständi
g
en Vertriebspartner
• Ihre Verkaufsstelle
Die Adressen Ihrer Servicepartner finden Sie im Garantieheft oder im Service-Adressenheft.
Aktuelle Informationen zu unseren Produkten, Tips, Updates usw. finden Sie im Internet:
http://www.fujitsu-siemens.com
Is there ...
... any technical problem or other
question you need clarified?
Please contact:
• one of our service partners
• your sales partner
• your sales outlet
The addresses of your service partners are contained in the
g
uarantee booklet or in the service
address booklet.
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com
! "
# $
%&
'( ) *
+,&- ,.
' *
/* 0122 01&22
U41126-J-Z156-1-74
Systembaugruppe
D1159
System Board D1159
Technisches Handbuch
Technical Manual
Deutsch
Elih
En
g
lish
Ausgabe November 1999
December 1999 edition
Intel, Pentium und Celeron sind eingetragene Warenzeichen und MMX ist ein Warenzeichen
der Intel Corporation, USA.
Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft
Corporation.
PS/2 ist ein eingetragenes Warenzeichen von International Business Machines, Inc.
Magic Packet ist ein eingetragenes Warenzeichen von Advanced Micro Devices, Inc.
Rambus, RDRAM, und das Rambus Logo sind eingetragene Warenzeichen der Rambus Inc.
Direct Rambus, RIMM, SO-RIMM und Direct RDRAM sind Warenzeichen von Rambus Inc.
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen
der jeweiligen Inhaber und werden als geschützt anerkannt.
Copyright Fujitsu Siemens Computers GmbH 1999
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are
trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
Magic Packet is a registered trademark of Advanced Micro Devices, Inc.
Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct
Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
U41126-J-Z156-1-74
Contents
Introduction....................................................................................................................................... 1
Notational conventions.............................................................................................................. 1
Important notes................................................................................................................................. 1
Information on boards............................................................................................................... 2
Features ........................................................................................................................................... 3
Interfaces and connectors......................................................................................................... 5
Temperature monitoring / system monitoring............................................................................ 7
Hard disk connection................................................................................................................. 8
LAN port.................................................................................................................................... 8
PCI bus interrupts..................................................................................................................... 8
Settings............................................................................................................................................. 9
Processor's clock speed ........................................................................................................... 9
Setting USB power jumper...................................................................................................... 10
Recovering System BIOS - switch 2 ....................................................................................... 10
Write protection for floppy disks - switch 3.............................................................................. 10
Add-on modules.............................................................................................................................. 11
Installing / removing processor................................................................................................ 12
Upgrading main memory......................................................................................................... 13
Installing network board with WOL.......................................................................................... 15
Replacing the lithium battery................................................................................................... 15
Glossary ......................................................................................................................................... 16
U41126-J-Z156-1-74 English - 1
Introduction
iThese system boards are available in different confi
g
uration levels. Dependin
g
on the
hardware confi
g
uration of your device, it may be that you cannot find several options in
the system board, even though they are described.
You may find further information in the description "BIOS Setup".
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!Pay particular attention to texts marked with this symbol. Failure to observe this warnin
g
endangers your life, destroys the system, or may lead to loss of data.
iSupplementary information, remarks and tips follow this symbol.
Texts which follow this symbol describe activities that must be performed in the order shown.
This symbol means that you must enter a blank space at this point.
This symbol means that you must press the Enter key.
Texts in this typeface are screen outputs.
Texts in this bold typeface are the entries you make via the keyboard.
Texts in italics indicate commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being emphasized.
Important notes
Store this manual close to the device. If you pass on the device to third parties, you should also
pass on this manual.
!Be sure to read this page carefully and note the information before you open the device.
You cannot access the components of the system board without first openin
g
the device.
How to dismantle and reassemble the device is described in the Operatin
g
Manual
accompanying the device.
Please note the information provided in the chapter "Safety" in the Operatin
g
Manual of
the device.
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the chapter "Add-on modules“- "Replacin
g
the
lithium battery“.
Important notes
2 - English U41126-J-Z156-1-74
The shipped version of this board complies with the requirements of the EEC
directive 89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installin
g
the board, refer to the specific installation information in the
Operating Manual or Technical Manual of the receiving device.
Connecting cables for peripherals must be adequately insulated to avoid interference.
!Components can become very hot durin
g
operation. Make sure you do not touch
components when making extensions to the system board. There is a danger of burns!
iThe warranty is invalidated if the device is dama
g
ed durin
g
the installation or
replacement of system expansions. Information on which system expansions you can
use is available from your sales outlet or the customer service center.
Information on boards
To prevent damage to the system board or the components and conductors on it, please take great
care when you insert or remove boards. Take care above all to ensure that extension boards are
slotted in straight without damaging components or conductors on the system board, or any other
components, for example EMI spring contacts.
Be especially careful with the locking mechanisms (catches, centering pins etc.) when you replace
the system board or components on it, for example memory modules or processors.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the
label shown.
When you handle boards fitted with ESDs, you must observe the followin
g
points under all circumstances:
• You must always dischar
g
e yourself (e.
g
. by touchin
g
a
g
rounded
object) before working.
• The equipment and tools you use must be free of static charges.
• Pull out the power plu
g
before insertin
g
or pullin
g
out boards containin
g
ESDs.
• Always hold boards with ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.
Table des matières
Autres manuels Siemens Matériel informatique
Siemens
Siemens CP 1612 A2 Manuel utilisateur
Siemens
Siemens SIMATIC NET CP 5614 A2 Manuel utilisateur
Siemens
Siemens PAD-5 Series Manuel utilisateur
Siemens
Siemens CP 342-5 Manuel utilisateur
Siemens
Siemens CP 5623 Manuel utilisateur
Siemens
Siemens CPU 31 Series Manuel d'instructions
Siemens
Siemens SIMATIC S7-1200 Manuel utilisateur
Siemens
Siemens LMV50 series Manuel utilisateur
Siemens
Siemens CPU 412-1 Manuel utilisateur
Siemens
Siemens System 600 APOGEE Manuel utilisateur
Siemens
Siemens SIMATIC NET CP 243-1 Manuel utilisateur
Siemens
Siemens SIMATIC S7-300 CPU Data: CPU 315-T-2 DP Manuel utilisateur
Siemens
Siemens XMS-SP Manuel utilisateur
Siemens
Siemens SIMATIC CP 541 Manuel utilisateur
Siemens
Siemens Simatic S7-300 31xC Series Manuel utilisateur
Siemens
Siemens CP 1626 Manuel utilisateur
Siemens
Siemens SENTRON PROFIBUS DPV1 Series Manuel utilisateur
Siemens
Siemens SIMATIC PG 760 Manuel
Siemens
Siemens Simatic S7-300 Manuel d'instructions
Siemens
Siemens CP 1243-8 IRC Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
