Shuttle FS58 Manuel utilisateur

FS58

Pentium4,LGA775Processor

Based MAIN BOARD

Shuttle®FS58

Pentium 4, LGA 775 Processor Based Mainboard

No part of this publication may be reproduced, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

prior written permission from Shuttle®Inc.

Disclaimer

Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.

Information in this manual has been carefully checked for reliability; however, no guarantee is

given as to the correctness of the contents. In the interest of continued product improvement,

this company reserves the right to revise the manual or include changes in the specifications

of the product described within it at any time without notice and without obligation to notify any

person of such revision or changes. The information contained in this manual is provided for

general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

Intel, Pentium is a registered trademarks of Intel Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product names used in this manual are ascribed to their respective

owners and acknowledged.

M981

Statement of Shuttle Mainboard via the EMI Test

Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/

CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,ANSI

C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-

trated as follows:

(A)Voltage:AC110V/60HZ &AC230V/50HZ

(B) Tested Product Information:

Product Name: PC Mainboard

Status: Sample

ModelName: FS58

S/N:N/A

CPU:

External Frequency: 133 MHz

Intel Pentium 4, LGA 775 Processor: 2.40/ 2.53/ 2.66/ 2.80 GHz

External Frequency: 200 MHz

Intel Pentium 4, LGA 775 Processor: 2.8/ 3/ 3.2/ 3.4/ 3.6 GHz

Serial Port: one port with 9 pins

VGA Port: one port with 15 pins

Keyboard Port: one port with 6 pins

Mouse Port: one port with 6 pins

USB 2.0 Port: four ports with 4 pins respectively

1394 Port: one port with 4 pins and one port with 6 pins respectively

LAN Port: one port with 8 pins (10Mbps/100Mbps)

Center/Bass-Out Port: four ports

Mic-In Ports: one port

Line-In Ports: two ports

SPDIF-Out (Coaxial) Port: one port

SPDIF-Out (Optical) Port: one port

SPDIF-In (Optical) Port: one port

Clear CMOS button: one port

DIMM Memory (optional): DDR 400 256 MB *2

Power Cable: Detachable and Shielded (with a GND pin)

Monitor: CRT+DVI

Maximum Resolution: 1280 X 1024 V:60Hz

All CPUs have completely been tested, and values offered by the worst EMI combination of

CPU external frequency are listed as follows:

Test Mode External Frequency CPU CPU Open/Close

1200MHz P4 3.6 GHz Close

2200MHz P4 3.6 GHz Open

3133MHz P4 2.8 GHz Close

4133MHz P4 2.8 GHz Open

Remedy:N/A

EMIInterference:

Crystal:14.318MHz(X2)/ 25MHz(X6)/32.768KHz(X1)/12MHz(X4)

/24.576MHz(X7)/ 24.576MHz(X5).

ClockGenerator: U4,U5

(D) Supported Host Peripherals:

Host Peripheral Product Name Model Name

# 1 Case FS58

# 2 Power Supply PC40I2503

# 3 SerialATA Westerm Digital WD1200JD-00FYB0

# 4 Panasonic FDD JU-257A606P

# 5 Pioneer DVD Player DVD-116

(E) Notices for Assembling Computers:

1. Cases should be made of iron or other metal that has good electric conductivity.

2. Cylinders in a case should be made of metal, and as having a mainboard mounted

in a case, make sure screws are all utilized and fastened on a mainboard.

3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.

4. Cables should appropriately be arranged and fixed in a case. Follow instructions:

Ø Leave IDE cables not crossed upon CPU and SDRAM;

Ø Leave power cables minimum in length, and not crossed upon a mainboard;

Ø Leave CPU fan cables minimum in length, and not near CPU;

Ø Leave cables on panels and other spare cables tied in a computer case.

5. Make sure an EMI shielding attached to a case has properly been installed.

6. Make sure a 5.25" and screws are fastened to an EMI shielding.

7. Make sure a case is closely in contact with EMI connected points.

8. Make sure there is no cleft in a case which is not deformed.

9. Make sure a PCI door is bound to a case.

10. Make sure cables of other devices (fans or some others) are fixed in a case.

Important Safety Information

SAFETY INSTRUCTIONS

1. Pleasereadthese safetyinstructionscarefully.

2. PleasekeepthisUser‘s Manual forlaterreference.

3. PleasedisconnectthisequipmentfromACoutletbeforecleaning.Don‘tuseliquid

orsprayeddetergentfor cleaning.

4. Forpluggableequipment,the socket-outletshallbeinstallednear theequipment

andshallbeeasilyaccessible.

5. Pleasekeepthis equipmentfromhumidity.

6. Laythisequipment onareliablesurface wheninstall.A drop or fallcouldcauseinjury.

7. Donotleavethis equipment inanenvironmentunconditioned,it may damagethe

equipment.

8. Theopeningsonthe enclosure areforairconvectionhence Protect theequipment

fromoverheating.DO NOTCOVERTHEOPENINGS.

9. Makesurethevoltage ofthepowersourcewhen connect theequipmenttothe

poweroutlet.

10. Placethepowercord suchawaythat peoplecannotstep onit.Donot placeanything

overthepower cord.Thepower cordmustberatedfortheproduct andforthevoltage

andcurrentmarkedontheproduct’selectricalratingslabel.Thevoltageandcurrent

ratingofthecord should begreaterthanthevoltage and currentratingmarkedonthe

product.

11. Allcautionsandwarnings on theequipmentshouldbenoted.

12. Iftheequipmentisnotuseforlongtime,disconnectthe equipmentfrommainstoavoid

beingdamagedby transientover-voltage.

13. Neverpouranyliquidintoventilationopenings,thiscouldcausefireorelectricalshock.

14. CAUTION:Thecomputeris provided withabattery-poweredreal-timeclock circuit.

Thereisadangerof explosion if batteryisincorrectlyreplaced.

Replaceonlywith sameorequivalenttype recommendedbythemanufacture.

Discardusedbatteriesaccordingtothe manufacturer’s instructions.

15. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITHAPPROPRI-

ATESAFETYSTANDARDSINCLUDINGIEC60825.

CAUTION :RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS

CLASS 1 LASER PRODUCT

- 1 -

TABLE OF CONTENTS

WHAT'S IN THE MANUAL.................................................................... 5

Quick Reference............................................................................................... 5

About This Manual ........................................................................................... 5

1 INTRODUCTION................................................................................ 6

1.1 TO DIFFERENT USERS ............................................................................. 6

FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6

EXPERIENCEDDIY USER ........................................................................ 6

SYSTEMINTEGRATOR............................................................................... 6

1.2 ITEM CHECKLIST....................................................................................... 7

2 FEATURES ........................................................................................ 8

2.1 SPECIFICATIONS ....................................................................................... 8

3 HARDWARE INSTALLATION.......................................................... 11

3.1 STEP BY STEP INSTALLATION................................................................11

Accessories of FS58..............................................................................11

STEP1CPUInstallation ........................................................................ 12

STEP 2 Set Jumpers............................................................................. 14

STEP3InstallDDRSDRAMSystemMemory........................................ 14

STEP 4Install InternalPeripheralsin System Case ................................ 15

STEP5MounttheMainboardontheComputerChassis........................ 16

STEP6Connect Front-PanelSwitches/LEDs/USBs/1394/Aux-In/Mic-In/

Line-Out ................................................................................................ 16

STEP 7 Connect IDE, Floppy and SerialATADisk Drives ...................... 17

STEP8Connect OtherInternalPeripherals............................................ 18

STEP9InstallAdd-on Cards inExpansion Slots .................................... 20

STEP10ConnectPowerSupply ........................................................... 21

STEP11ConnectExternalPeripheralstoBack-panel ........................... 21

STEP 12 First Time System Boot Up ..................................................... 22

- 2 -

STEP13InstallDriver&SoftwareComponents ..................................... 23

3.2 JUMPER SETTINGS ................................................................................. 24

JUMPERS&CONNECTORSGUIDE.................................................... 25

Back-Panel Connectors

VGAPort............................................................................................... 28

COM Port .............................................................................................. 28

SPDIF-INPort........................................................................................ 28

1394 Port .............................................................................................. 28

PS/2 Keyboard & PS/2 Mouse Ports ..................................................... 28

LANPort ............................................................................................... 29

USB Ports ............................................................................................. 29

SPDIF-OUTRCAPort ........................................................................... 29

Line-InPort ............................................................................................ 29

5.1ChannelBass/Centerport ................................................................ 30

5.1ChannelRear-Outport ..................................................................... 30

5.1ChannelFront-Outport..................................................................... 30

ClearCMOSButton............................................................................... 30

Front-Panel Connector

ATXPowerOn/Off SwitchConnector(PWON) ....................................... 31

HDD LED Connector (HLED) ................................................................ 31

GreenLED/PowerLEDConnector(GLED/PWRLED) ......................... 32

HardwareResetConnector (RST) ......................................................... 32

FrontPanelAUDIO/USB/1394Connector(JP9)................................... 33

Internal Peripherals Connectors

EnhancedIDE,Floppy Connectors ........................................................ 34

Other Connectors

ATXPowerSupplyConnectors(CN5/JP10) .......................................... 35

- 3 -

FanConnectors(FAN1/2/3) ................................................................... 36

SPDIFOUTConnector (JP18)(White).................................................... 36

LINE-IN(J4),CD-IN(CN3),MiniCD-IN(CN4)Connectors ........................ 37

ParallelPortHeader-EXT.PrintPort(JP11) ........................................... 38

WirelessKeyboardandMouseConnectors (JP2).................................. 39

IRConnector(JP13) .............................................................................. 39

USB Header (JP3) ................................................................................ 40

EXT.GPIHeader(JP15)........................................................................ 40

3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 41

INSTALLMEMORY................................................................................ 41

UPGRADEMEMORY............................................................................ 41

4 SOFTWARE UTILITY ......................................................................42

4.1 Mainboard CD Overview ......................................................................... 42

4.2 Install Mainboard Software ..................................................................... 43

4.2.A Install SIS AGP Driver ............................................................................ 44

4.2.B Install SIS IDE Driver............................................................................. 44

4.2.C Install SIS VGA Driver ........................................................................... 45

4.2.D Install Realtek LAN Driver..................................................................... 45

4.2.E Install Realtek Audio Driver .................................................................. 46

4.2.F Install SIS USB2.0 Driver....................................................................... 46

4.2.G Install DirectX9 Utility............................................................................ 47

4.3 View the User's Manual........................................................................... 47

5 BIOS SETUP ................................................................................... 48

5.1 Enter the BIOS .......................................................................................... 48

5.2 THE MAIN MENU ...................................................................................... 49

STANDARD CMOS FEATURES ............................................................... 51

- 4 -

ADVANCED BIOS FEATURES ................................................................. 54

ADVANCED CHIPSET FEATURES .......................................................... 58

INTEGRATEDPERIPHERALS .................................................................. 61

POWERMANAGEMENTSETUP.............................................................. 64

PNP/PCICONFIGURATIONS .................................................................... 68

PCHEALTHSTATUS................................................................................ 70

Frequency/VoltageControl......................................................................... 72

LOAD FAIL-SAFE DEFAULTS .................................................................. 74

LOADOPTIMIZEDDEFAULTS ................................................................. 74

SET PASSWORD ..................................................................................... 74

SAVE & EXIT SETUP................................................................................ 75

EXITWITHOUTSAVING ............................................................................ 75

- 5 -

WHAT'S IN THE MANUAL

Quick Reference

Hardware Installation >> Step-by-Step ................................................ Page 11

Jumper Settings >> A Closer Look.......................................................Page 24

Drivers/Software Utilities >> How to Install .........................................Page 42

BIOS Setup >> How to Configure.........................................................Page 48

About This Manual

For First-Time DIY System Builder.........................................................Page 6

For Experienced DIY User ......................................................................Page 6

For System Integrator .............................................................................Page 6

Table des matières

Autres manuels Shuttle Carte mère

Shuttle

Shuttle Spacewalker MV25 Manuel utilisateur

Shuttle

Shuttle HOT-683 Manuel utilisateur

Shuttle

Shuttle FB54 Manuel utilisateur

Shuttle

Shuttle HOT-675V Manuel utilisateur

Shuttle

Shuttle Spacewalker MV17 Manuel utilisateur

Shuttle

Shuttle av61 Manuel utilisateur

Shuttle

Shuttle FN41V3 Manuel utilisateur

Shuttle

Shuttle FB95 Manuel utilisateur

Shuttle

Shuttle Spacewalker AK31 Manuel utilisateur

Shuttle

Shuttle FV24 Manuel utilisateur

Shuttle

Shuttle FT62 Manuel utilisateur

Shuttle

Shuttle HOT-679V Manuel utilisateur

Shuttle

Shuttle MV43V Manuel utilisateur

Shuttle

Shuttle Spacewalker MV18 Manuel utilisateur

Shuttle

Shuttle MB48 Manuel utilisateur

Shuttle

Shuttle FT61 Manuel utilisateur

Shuttle

Shuttle AB49 Manuel utilisateur

Shuttle

Shuttle HOT-595 Manuel utilisateur

Shuttle

Shuttle Spacewalker AB40 Manuel utilisateur

Shuttle

Shuttle FN45 Manuel utilisateur

Shuttle

Shuttle MV43 Manuel utilisateur

Shuttle

Shuttle FN41 Manuel utilisateur

Shuttle

Shuttle HOT-641/P Manuel utilisateur

Shuttle

Shuttle Spacewalke AK21 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur