Shuttle MT63 Manuel utilisateur
MT63
Pentium4/Celeron,478-pinProcessor
Based MAIN BOARD
Shuttle®MT63
Pentium 4/Celeron , 478-pin Processor Based Mainboard
Manual Version 1.0
Copyright
Copyright©2003 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel, Pentium is a registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.
M863
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName: MT63
S/N:N/A
CPU:
External Frequency: 100 MHz
IntelPentium4: 1.6/1.8/ 2.0/2.2/2.4/2.6GHz
External Frequency: 133 MHz
Intel Pentium4: 2.26/ 2.40/ 2.53/ 2.66/ 2.80/ 3.06 GHz
External Frequency: 200 MHz
Intel Pentium4: 2.8/ 3.0/ 3.2 GHz
Serial Port: one ports with 9 pins
Parallel Port: one port with 25 pins
VGA Port: one port with 15 pins
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
USB 2.0 Port: four ports with 4 pins respectively
LAN Port: one port with 8 pins (10Mbps/100Mbps/1000Mbps)
Mic-In & Line-Out & Line-In Ports: one port for each
DIMM Memory (optional): DDR 400 256 MB *4
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode External Frequency CPU CPU Open/Close
1100MHz P4 2.60 GHz Close
2100MHz P4 2.60 GHz Open
3133MHz P4 3.06 GHz Close
4133MHz P4 3.06 GHz Open
5200MHz P4 3.20 GHz Close
6200MHz P4 3.20 GHz Open
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X1)/ 32.768KHz(X2)/25.00MHz(X3)/ 25.00MHz(X4)/
24.576MHz(X5)
Clock Generator: CLK1
(D) Supported Host Peripherals:
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name S/N FCC ID
#1 Case MT63 N/A
#2 power supply (300w) delta DPS-300KB-1A TDC0024000143
#3 Maxtor HDD (40 GB) D740X-6L N/A 3902B975
#4 Panasonic FDD JU-257A606P
#5 Pioneer DVD Player DVD-116 AAMS027197WL 3892D029
- 1 -
TABLE OF CONTENTS
WHAT'S IN THE MANUAL.................................................................... 5
Quick Reference............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6
EXPERIENCEDDIY USER ........................................................................ 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST....................................................................................... 7
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION.......................................................... 11
3.1 STEP BY STEP INSTALLATION................................................................11
Accessories of MT63..............................................................................11
STEP1CPUInstallation ........................................................................ 12
STEP 2 Set Jumpers............................................................................. 13
STEP3InstallDDRSDRAMSystemMemory........................................ 13
STEP 4Install InternalPeripheralsin System Case ................................ 14
STEP5MounttheMainboardontheComputerChassis........................ 15
STEP6ConnectFront-Panel Switches/LEDs/Speaker connectors........ 16
STEP 7 Connect IDE, Floppy, and SerialATA Disk Drives ..................... 17
STEP8Connect OtherInternalPeripherals............................................ 18
STEP9ConnectPowerSupply ............................................................. 19
STEP10InstallAdd-on Cards in ExpansionSlots .................................. 20
STEP11ConnectExternalPeripheralstoBack-panel ........................... 21
STEP 12 First Time System Boot Up ..................................................... 22
STEP13InstallDriver&SoftwareComponents..................................... 23
- 2 -
3.2 JUMPER SETTINGS ................................................................................. 24
JUMPERS&CONNECTORSGUIDE.................................................... 25
Jumpers
Clear CMOS Setting (JP1) ................................................................... 27
Back-Panel Connectors
PS/2Keyboard&PS/2MouseConnectors............................................ 28
ParallelPortConnector.......................................................................... 28
VGAConnector ..................................................................................... 28
COM1PortConnector ........................................................................... 28
USBPortConnectors ............................................................................ 29
LANPortConnector .............................................................................. 29
Bass/Center-Out(Mic-In)Port ................................................................ 29
Line-In(Rear-Out)Port.......................................................................... .29
Line-OutPort ......................................................................................... 29
Front-Panel Connectors
ATXPowerOn/Off SwitchConnector(PWON) ....................................... 30
GreenLED/PowerLEDConnector(GLED/PLED)................................. 31
HDD LED Connector (HLED) ................................................................ 31
Power LED Connector (PLED).............................................................. 32
HardwareResetConnector(Reset) ....................................................... 32
SpeakerConnector(Speaker) ............................................................... 32
Internal Peripherals Connectors
EnhancedIDE,FloppyATAConnectors ................................................. 33
SerialATAConnectors(ATA1)(Optional) ............................................... 33
Other Connectors
ATXPowerSupplyConnectors(ATX1andATX2).................................. 34
CPU,ChipsetandSystemFanConnectors(FAN1/2/3).......................... 35
AudioCD_INConnectors(J4)(Black)/ (J6)(White)................................. 35
- 3 -
AUXILIARYCDin Connector(J5)(White) ............................................... 36
SPDIF_Out/InHeader(JP4)................................................................... 36
Front-PanelMicrophoneandLine_outHeader (JP3) ............................. 37
ExtendedoneUSBConnectorHeader(J2)............................................ 37
IrDAHeader(J3).................................................................................... 38
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 39
INSTALLMEMORY................................................................................ 39
UPGRADEMEMORY............................................................................ 39
4 SOFTWARE UTILITY ......................................................................40
4.1 Mainboard CD Overview ......................................................................... 40
4.2 Install Mainboard Software ..................................................................... 41
4.2.A InstallATI Chipset Driver ...................................................................... 42
4.2.B Install ATI VGA Driver ........................................................................... 42
4.2.C Install Realtek Audio Driver ................................................................. 43
4.2.D Install Broadcom LAN Driver............................................................... 43
4.2.E Install Silicon RAID Driver (Optional) .................................................. 44
4.2.F Install ATI USB2.0 Driver ...................................................................... 44
4.3 View the User's Manual........................................................................... 45
5 BIOS SETUP ................................................................................... 46
5.1 Enter the BIOS .......................................................................................... 46
5.2 THE MAIN MENU ...................................................................................... 47
STANDARD CMOS FEATURES ............................................................... 49
ADVANCED BIOS FEATURES................................................................. 52
ADVANCED CHIPSET FEATURES .......................................................... 56
INTEGRATEDPERIPHERALS .................................................................. 60
POWERMANAGEMENTSETUP.............................................................. 64
PNP/PCICONFIGURATIONS .................................................................... 67
- 4 -
PCHEALTHSTATUS................................................................................ 69
LOAD FAIL-SAFE DEFAULTS .................................................................. 70
LOADOPTIMIZEDDEFAULTS ................................................................. 70
SET PASSWORD ..................................................................................... 71
SAVE & EXIT SETUP................................................................................ 72
EXITWITHOUTSAVING ............................................................................ 72
- 5 -
WHAT'S IN THE MANUAL
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 11
Jumper Settings >> A Closer Look.......................................................Page 24
Drivers/Software Utilities >> How to Install .........................................Page 40
BIOS Setup >> How to Configure.........................................................Page 46
About This Manual
For First-Time DIY System Builder.........................................................Page 6
For Experienced DIY User ......................................................................Page 6
For System Integrator .............................................................................Page 6
- 6 -
1INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle MT63 mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle MT63 mainboard. You will find
that installing your new Shuttle MT63 mainboard is just easy. Bundled with an
array of onboard functions, the highly-integrated MT63 mainboard provides
you with a total solution to build the most stable and reliable system. Refer to
sections 3.2 Jumper Settings and Chapter 4 Drivers/Software Utilities to
find out how to get the best out of your new mainboard. Chapter 5 BIOS
Setup also contains the relevant information on how to tune up your system to
achieve higher performance.
System Integrator
You have wisely chosen Shuttle MT63 to construct your system. Shuttle MT63
incorporates all the state-of-the-art technology of the RS300+IXP150 chipset
from ATI. It integrates the most advanced functions you can find to date in a
compact Micro ATX board.
Table des matières
Autres manuels Shuttle Carte mère
Shuttle
Shuttle Spacewalker AB30 Manuel utilisateur
Shuttle
Shuttle HOT-673 Manuel utilisateur
Shuttle
Shuttle Spacewalker MV17 Manuel utilisateur
Shuttle
Shuttle Spacewalker MS50 Manuel utilisateur
Shuttle
Shuttle DL30N Series Manuel utilisateur
Shuttle
Shuttle MB47N Manuel utilisateur
Shuttle
Shuttle HOT-661/P Manuel utilisateur
Shuttle
Shuttle Spacewalker AK31 Manuel utilisateur
Shuttle
Shuttle HOT-579 Manuel utilisateur
Shuttle
Shuttle FV24 Manuel utilisateur
Shuttle
Shuttle Spacewalker AV30 Manuel utilisateur
Shuttle
Shuttle AB60P Manuel utilisateur
Shuttle
Shuttle FS51 Manuel utilisateur
Shuttle
Shuttle HOT-597 Manuel utilisateur
Shuttle
Shuttle Spacewalker ME17 Manuel utilisateur
Shuttle
Shuttle HOT-675V Manuel utilisateur
Shuttle
Shuttle AN50R Manuel utilisateur
Shuttle
Shuttle HOT-681 Manuel utilisateur
Shuttle
Shuttle FS56 Manuel utilisateur
Shuttle
Shuttle Spacewalker MS51 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
