Shining 3D EinScan-SE Manuel utilisateur
Shining 3D EinScan SE/SP_User Manual_3.1.1
0
EinScan SE/SP
User Manual
V3.1.1
Shining 3D EinScan SE/SP_User Manual_3.1.1
1
Table of contents
1. Specification and System Requirements...................................................................................3
1.1. System Requirements ..............................................................................................................................3
1.2. Hardware Installation...............................................................................................................................4
2. Set Software ..............................................................................................................................7
2.1. Download the Software............................................................................................................................7
2.2. Install the Software ..................................................................................................................................7
2.3. Update the Software................................................................................................................................7
2.4. Activate the Scanner ................................................................................................................................8
2.5. Interface and Parameters.........................................................................................................................9
3. Calibrate the Scanner..............................................................................................................14
3.1. Precautions and Use...............................................................................................................................14
3.2. Operation ...............................................................................................................................................14
4. Before Scanning.......................................................................................................................19
4.1. Object.....................................................................................................................................................19
4.2. Preparation.............................................................................................................................................19
5. Scan .........................................................................................................................................21
5.1. Before Scanning......................................................................................................................................21
5.2. Turntable................................................................................................................................................23
5.3. Scan........................................................................................................................................................26
6. Project Group ..........................................................................................................................29
6.1. Create/Import Projects...........................................................................................................................29
6.2. Current Projects .....................................................................................................................................29
6.3. Rename a Project ...................................................................................................................................29
6.4. Remove/Delete ......................................................................................................................................30
6.5. Create/Split a Group...............................................................................................................................31
6.6. Edit Data.................................................................................................................................................31
6.7. Alignment...............................................................................................................................................32
7. Mesh........................................................................................................................................34
7.1. Create Mesh (Watertight/Unwatertight) ...............................................................................................34
7.2. Edit Mesh ...............................................................................................................................................35
7.3. Fill Holes .................................................................................................................................................36
7.4. Sharpen ..................................................................................................................................................37
7.5. Smooth...................................................................................................................................................37
7.6. Simplify...................................................................................................................................................38
7.7. Remap Texture.......................................................................................................................................38
8. Export Data..............................................................................................................................40
8.1. Data Formats..........................................................................................................................................40
8.2. Scale Data...............................................................................................................................................41
8.3. Measurement.........................................................................................................................................41
Shining 3D EinScan SE/SP_User Manual_3.1.1
2
9. Share Data ...............................................................................................................................48
10. Third-party Software ...........................................................................................................49
11. Preview Model.....................................................................................................................50
12. Others..................................................................................................................................51
12.1. FAQ.........................................................................................................................................................51
12.2. Safety Precautions..................................................................................................................................51
13. Support and Contact............................................................................................................52
13.1. Submit a Ticket.......................................................................................................................................52
13.2. Contact Us..............................................................................................................................................53
Shining 3D EinScan SE/SP_User Manual_3.1.1
3
1. Specification and System Requirements
1.1. Recommended System Configuration
Preparing a suitable computer will improve your scanning experience.
Handheld model
EinScan SE/SP
Recommended
Operating System
Win10，64bit
Graphics card
Integrated graphics & NVIDIA series
USB port
at least one USB2.0/3.0 port
(At least one USB 3.0 port when using discovery pack)
OS
win10 64bits
Video memory
> 4G
RAM
>32 GB
CPU
i7-8700 or higher
Screen resolution
1920*1080 DPI: 100%; 125%
3840*2106 DPI: 100%; 200%
RECOMMENDED PC MODEL （only for reference）
Dell G3 laptops, Core i7-9750H, NVIDIA GeForce RTX 2060 6GB GDDR6, 2x8GB, DDR4, 2666MHz
Asus ZenBook Flip, Core i7, Nvidia MX250 with 2Gb memory, solid state hard drive, 16gb ram
Lenovo Y520 15IKBM i7-7700hq, 16GB, gtx1060
Acer Predator PH317 i7, GTX1060, 16G RAM
MSI –GS63VR 7RF stealth pro RAM 32G
Alien ALW15M-R2726R
ASUS ROG STRIX
Shining 3D EinScan SE/SP_User Manual_3.1.1
4
1.2. Hardware Installation
Unpack and set up your scanner and software before getting started with scanning.
1.2.1. Set the Scanner
Step 1. Place the scanner head onto the bracket.
Step 2. Insert calibration board onto the board holder.
NOTE: Rotate the calibration board only while calibration.
Step 3-1. Turntable and Scanner installation.
1) Place the turntable onto
scanner stand
2) Screw the scanner into the
socket on the stand.
Shining 3D EinScan SE/SP_User Manual_3.1.1
5
3) Plug power cord into outlet and the back of scanner; Plug USB cable into back of scanner and
computer USB port; Plug USB cable into back of scanner, and turntable.
Step3-2. Setting scanner on tripod for fixed scan, turntable coded targets and markers align
mode.
1) Screw the scanner head onto tripod.
2)Plug power cord into outlet and the back of scanner; Plug USB cable into back of scanner and
computer USB port; Plug USB cable into back of scanner, and turntable.
1.2.2. Turn on/off the Scanner
Hold on the touch switch for about one second to turn the scanner on.
Shining 3D EinScan SE/SP_User Manual_3.1.1
6
Double-click on the touch switch and stay for one second each time to turn the scanner off.
If the device with mechanical ON/OFF switch, Press the power button to turn scanner on; press again,
then turn scanner off.
Shining 3D EinScan SE/SP_User Manual_3.1.1
7
2. Set Software
2.1. Download the Software
Step 1: Go to https://www.einscan.com/support/download/.
Step 2: Select your scanner model.
Step 3: Download the software to your operating computer.
Note: You are required to register before downloading.
2.2. Install the Software
1. Double click installation package, accept the modification on your computer.
2. Follow the instructions to complete the software installation.
After the software is installed, a shortcut will be created on your desktop. Double click to
open the software.
2.3. Update the Software
When a new version is available, a pop-up will show when you start the software to remind you
update your software to the latest version.
Click Yes to update.
Update Reminder
Note before installation: Administrator rights are required for the installation of the software only.
Shining 3D EinScan SE/SP_User Manual_3.1.1
8
2.4. Activate the Scanner
Device activation is required in your initial use. There are 2 ways:
1. Online activation is recommended if your computer is connected to the internet.
2. If there is an issue with network connection, choose Local activation to save the .ple license file
on your computer, under the activation menu. (.ple file can be found in the USB drive.)
Online Activation
Local activation
When install Discovery Pack, you need to download the pack license, or import the file
with .encode suffix in the USB disk.
Note: If the activation fails, send a request for activation file to einscan_supp[email protected] with
your serial number.
Click this button to reveal
the Local Activation
Shining 3D EinScan SE/SP_User Manual_3.1.1
9
Discovery Pack license tool
2.5. Interface and Parameters
2.5.1. Navigate
Interface navigation
Left mouse: rotate
Middle mouse: move the data
Scroll up and down: zoom in or out
Navigate between different menu by click on the circle. Choose different scan modes if Discovery Pack
is connected.
Autres manuels pour EinScan-SE
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Shining 3D Imprimante 3D
Shining 3D
Shining 3D AccuFab-L4D Manuel utilisateur
Shining 3D
Shining 3D einstart-c Manuel utilisateur
Shining 3D
Shining 3D AccuFab-D1s Manuel utilisateur
Shining 3D
Shining 3D AccuFab-L4D Manuel utilisateur
Shining 3D
Shining 3D einstart-c Manuel utilisateur
Shining 3D
Shining 3D Einstart Manuel utilisateur
Shining 3D
Shining 3D AccuFab L4D Manuel utilisateur
Shining 3D
Shining 3D Transcan-C Manuel utilisateur
Shining 3D
Shining 3D AccuFab-D1s Manuel utilisateur
Shining 3D
Shining 3D einstart-c Manuel utilisateur
