Sharp FP-JC2 Manuel utilisateur
＊1
The technology marking data is based
on a unit attached to the passenger
seat seatback and a car air conditioning
air outlet speed of 4-meters per second
(equivalent to the “low” setting) with
the product operating at the “standard”
setting in the center of the space (0.5m
above the oor) to maintain 25000 high
dencity plasmacluster ions per cm³.
CAR AIR PURIFIER
OPERATION MANUAL
FP-JC2
The unit is designed for ordinary passenger
cars with DC 12V batteries.It cannot be used in
vehicles with DC 24V batteries
(buses, trucks, etc.)
＊1
"Plasmacluster" and "Device of a cluster
of grapes" are trademarks of Sharp
Corporation.
FP-JC2.indd 1 2018/06/28 11:35:09
All-in-one dust collection/deodorizing lter
Washable Deodorizing Filter
• Tobacco smoke (particles)
• Ammonia odor
• Acetaldehyde
• Acetic acid type odor
NOTE
• The air purier is designed to remove air-suspended dust and the odors.
The air purier is not designed to remove harmful gases such as carbon monoxide
contained in cigarette smoke.
The air purier may not completely remove an odor if the source of the odor is still
present.
• Some odors absorbed by the lters will break down over time, causing additional
odors. Depending on usage conditions, and especially if the unit is used in
environments signicantly more severe than a normal household, these odors may
become noticeable sooner than expected. Replace the lter in those cases or if dust
is unable to be removed after maintenance.
• Pollen, Allergens (Dust mite feces and remains)
• Mold
• Dust
• Tobacco smoke (particles)
• Pet odor
• Mold odor
• Ammonia odor
• Food smell
Can catch
Can catch
Do not wash
FP-JC2.indd 2 2018/06/28 11:35:11
E-1
Thank you for purchasing this SHARP Plasmacluster Ion Generator.
Please read this manual carefully before using Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future reference.
CONTENTS
• IMPORTANT SAFETY INSTRUCTIONS ...................................E-2
• PART NAMES ...................................................................... E-5
• PREPARATION.................................................................... E-7
• OPERATION ........................................................................ E-14
• CARE AND MAINTENANCE ............................................... E-16
• FILTER REPLACEMENT GUIDELINES.............................. E-18
• REPLACING THE FUSE...................................................... E-19
• SPECIFICATIONS................................................................ E-19
• TROUBLESHOOTING......................................................... E-20
FP-JC2.indd 1 2018/06/28 11:35:11
E-2
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of electrical shock, fire, or injury :
• Do not operate switches while driving.
(Doing so could lead to accidents.)
• Do not put in places exposed to direct
sunlight.(Doing so could cause warping or
malfunction.)
• Attach only to the driver’s seat or passenger
seat headrest shaft or the backseat center
arm rest.Do not place on the dashboard.
(as doing so can cause accident, injury, or
malfunction. )
• This unit is designed exclusively for use in vehicles
with 12V batteries. Do not use it in other vehicles.
Do not use the unit in large trucks, buses or other
vehicles with 24V batteries.
(Doing so could lead to re or electric shock.)
• Do not damage or modify the cord.Also, do not
use the cord if it is damaged.
(The damaged section could cause short-circuiting
and the cord could melt,leading to re.)
If the cord is damaged,contact
your store of purchase or SHARP
authorized service center.
• Do not pull on the cord when
unplugging the car adapter or the
Micro USB plug.(Doing so could
damage the cord,leading to re or
electric shock.)
• Do not plug in or unplug the car
adapter or the Micro USB plug with
wet hands.(Doing so could cause
electric shock.)
• When transporting, be careful not to drop the unit or subject it to shocks.
(Doing so could cause injury or damage.)
If the unit should drop or be damaged, contact your store of purchase or
SHARP authorized service center.Continued usage of damaged unit could
lead to re or electric shock.
• Do not install in the place that hinders driving.
(Tangled around the shift lever,cause ofaccident,injury,failure)
Plug for main unit
Car Adapter
Car Adapter Plug for main unit
FP-JC2.indd 2 2018/06/28 11:35:15
E-3
• Do not modify the unit. Also, no one other than an authorized repairman
should take apart or repair the unit. (Doing so could lead to re, electric
shock or injury.) Contact your store of purchase or SHARP authorized
service center for repairs.
• Do not spill beverages or drop cigarette ashes, metal objects,easily
burnable objects, etc., into the unit through the air outlet or air intake.
Be particularly careful if there are small children in your family.
If water or foreign substances should get inside the unit,unplug the car
adapter from the accessory socket.
(Continued usage could lead to re or electric shock.) Contact your store
of purchase or SHARP authorized service center.
• Do not wipe the unit with oils, alcohol, benzene or thinners, or spray
hairspray or insecticides on the unit. If such substances should get on
the unit, wipe them off immediately.(Such substances could lead to
cracking or electric shock or could catch re.)
• Do not place the unit in a place where it is exposed to oil smoke or
moisture such as kitchen counter or humidifying device.
(Doing so could lead to electric shock.)
Do not place the unit near heating equipment such as the utlet of hot-air
type heater. (Doing so could cause warping or malfunction.)
• Use the car adapter designed exclusively for this unit, and insert the car
adapter securely all the way in until it stops.
(If the car adapter is not inserted securely until it stops, it could heat up,
deforming the accessory socket, and this could lead to re.)
• If the fuse should blow, be sure to replace it with a 2.5A glass tube fuse
(commercially available). Never use a piece of wire, etc., in place of the
fuse.(Using anything other than the specified type of fuse could cause
heating, leading to fire.)
• Wire in such a way that the cord does not get in the way of the driver.
Correctly attached wires according to the instructions in the Operation Manual.
(Incorrect wiring can cause injury or malfunction.)
• If you notice abnormal operation (mold odor, unusual noise, etc.) during operation,
stop operation and remove the car adapter from the socket,
(as a precaution against re, electric shock, or injury.)
• Be sure to unplug the car adapter from the accessory socket whencleaning.
(Failure to do so could cause electric shock or injury.)
• Be sure to unplug the car adapter from the accessory socket when not in
use for long periods of time.
(Failure to do so could lead to electric shock or re caused by short-
circuiting.)
FP-JC2.indd 3 2018/06/28 11:35:16
E-4
• If the accessory socket is integrated into the ashtray, be sure that cigarettes
are completely extinguished before using the unit.
• When leaving the vehicle, unplug the car adapter and close the ashtray’s lid.
(Failure to do so could lead to re caused by the smoldering cigarettes.)
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of electric shock, re or injury :
Caution
To reduce the risk of electric shock, re or injury :
• Do not attach or wire in a place that may interfere with the operation of the
car's air bags,(as doing so can cause a traffic accident or injury.)Air bag
activation can cause the unit and other objects to fly about the cabin.
• Do not touch the metal parts of the car adapter’s car adapter (or of the
accessory socket).(The metal parts of the car adapter could be hot directly
after the car is stopped, and could cause burns if touched.)
• Make sure that accessory attachment belt is not loose and secured tightly
in place.(A loose belt can become detached or fall off during operation and
cause injury or accident. )
• Do not operate the air purier without the lter attached.
(Without the lter, the air purier will not lter air and may also malfunction.)
• Move the unit out of the car when using room fumigating type insecticides
or deodorizers. If not, the chemicals could get inside the unit and later be
ejected from the air outlet, possibly harming your health.
• If the unit risks falling out (when driving on rough roads,over bumps, etc.),
either slow down or remove the unit beforehand. (Failure to do so could
cause injury or damage to the unit.)
• When attaching the unit, only use the accessory attachment belt,(as failing
to do so can cause accident or injury.)Before operating the unit, make
sure that the unit is properly secure and that the attachment belt is not
loose,(otherwise the unit may come loose or fall off and cause a trafc
accident or injury.)
• Do not use items of silicone-based products* near the unit.
The uororesin or silicone could get stuck inside the unit, preventing it from
producing Plasmacluster ions.
If this happens, remove the dust from the electrode section of the
Plasmacluster Ion Generating Unit.
* Hair care products (split end coatings, hair mousses, hair treatments, etc.),
cosmetics, antiperspirants, antistatic agents, waterproong sprays, polishes,
glass cleaners, chemicalimpregnated clothes, wax, etc.
The inside of the unit has insulation with fluoresin, silicon, and similar
materials that can cause the air purier to not emit Plasmacluster ions.
FP-JC2.indd 4 2018/06/28 11:35:16
E-5
Main Unit
・
Operation Panel
/
Display
PART NAMES
Operation Panel/Display
Front
Back
Cleanliness Monitor
(Green・Yellow)
Odor Monitor
(Yellow)
Operation
Button
Filter Reset
Indicator Light(Yellow)
Unit Replacing (green)
Light Control Button
<Press 3 sec.>
FILTER RESET Button
Mode Indicator
Light(Blue・Purple)
Front
Panel
Air Outlet
Main Unit
All-in-one
dustcollection/
deodorizing lter
Washable
Deodorizing Filter
Pre-Filter
Main Unit
Belt Guide
Power Input
Terminal
Cable Rail
Sensor Cover
Air Inlet
Plug for main unit
Cord(3m)
Car Adapter (With 2.5A glass tube fuse)
Connect to the cigar lighter socket in the vehicle.
・Mounting belt
・Cable Clip(5 pieces)
To x cable on wiring.
・Operation Manual
Turbo operation
button
Accessories
See E-17
See E- 6
See E- 6
FP-JC2.indd 5 2018/06/28 11:35:22
E-6
PART NAMES
Clean
Impure
Turn OFF
Yellow
Clean
Impure
Geeen
Yellow
Odor Monitor Cleanliness Monitor
Indicates the odor level in 2 steps. Indicates the air purify level in 2 steps.
Odor Monitor / Cleanliness Monitor
FP-JC2.indd 6 2018/06/28 11:35:22
E-7
1
2
3
Filter Installation
INSTLLATION
①①
②Front Panel
Pre-Filter Washable
Deodorizing Filter All-in-one dust collection/
deodorizing lter
Grab two lever
①
②
Washable
Deodorizing Filter
Pre-Filter
put
Upside the tagged surface
4
①①
②
②
Close Close
Front Panel
Open
Push
Push
All-in-one dust collection/
deodorizing lter
FP-JC2.indd 7 2018/06/28 11:35:26
E-8
1
2
3
①Securely insert the car adapter
connection plug into the unit's
power source input terminal.
②Conforming to the attaching
location, place the power cord
along the cable rail.(The cable rail
has two directions.)
※Do not wrap the power cord
downward.
Attachment belt precautions.
PREPARATION
Attaching to the seatback
Buckle
guide
Push
• To prevent accident or injury, do not install in a car model
without a headrest.
(as doing so can cause accident or injury.)
• When attaching the unit with the belt, make sure that the
unit cannot fall off once attached.
• To open the buckle, press the back surface with the
fingers,
（as shown in the drawing on the right.）
Detach the headrest.
To secure the belt, run the headrest
shaft through the belt hole*1, and
then attach the headrest.(The buckle
should be positioned as shown in *2 in
the drawing on the left.)
①②
②
Cable Rail
Hook the cable
※1
※2
Front Headrest
Shaft
Wrap the belt around
the shaft.
FP-JC2.indd 8 2018/06/28 11:35:31
Table des matières
Autres manuels Sharp Purificateur d'air
Sharp
Sharp IG-GC2EU Manuel utilisateur
Sharp
Sharp FU-A80TA Manuel utilisateur
Sharp
Sharp FU-Y30J-W Manuel utilisateur
Sharp
Sharp FU-NC01 Manuel utilisateur
Sharp
Sharp FP-J40A Manuel utilisateur
Sharp
Sharp Plasmacluster IG-CL15U Guide de configuration
Sharp
Sharp Plasmacluster KC-6400E Manuel utilisateur
Sharp
Sharp IG-DC2A Manuel utilisateur
Sharp
Sharp FP-J80Y Manuel utilisateur
Sharp
Sharp KC-F30Y Manuel utilisateur
Sharp
Sharp KI-L80 Manuel utilisateur
Sharp
Sharp IG-A40UW Manuel utilisateur
Sharp
Sharp KC-F31R Manuel utilisateur
Sharp
Sharp Plasmacluster FU-W25AW Manuel utilisateur
Sharp
Sharp FZ-80SEF Manuel utilisateur
Sharp
Sharp FP-F40A Manuel utilisateur
Sharp
Sharp FU-60SE-K Manuel utilisateur
Sharp
Sharp FU-440E Manuel utilisateur
Sharp
Sharp FP-GM50B Manuel utilisateur
Sharp
Sharp FZ-60SEF Manuel utilisateur
Manuels Purificateur d'air populaires d'autres marques
Winix
Winix NK300 Manuel utilisateur
Friedrich
Friedrich C-90A Instructions d'utilisation et d'installation
Surgically Clean Air
Surgically Clean Air JADE2.0 Manuel utilisateur
Base aire
Base aire 555 Pro Manuel utilisateur
Champion
Champion CP25 Manuel utilisateur
vollara
vollara Air & Surface Pro+ Manuel utilisateur