Surgically Clean Air JADE2.0 Manuel utilisateur

SURGICALLY CLEAN AIR

JADE2.0 (SCA5100C)

OPERATION MANUAL

Read the manual thoroughly before

operation and retain for future reference.

EPA Establishment#

100231CHN001

E520581

TABLE OF CONTENTS

SAFETY PRECAUTIONS

HOW IT WORKS

FEATURES AND SPECIFICATIONS

PART NAME

INSTALLATION

OPERATION

CARE AND MAINTENANCE

TROUBLESHOOTING

3-5

10-12

13-14

SAFETY PRECAUTIONS 1

Be sure to follow all precautions below:

Running Environment Cautions

•Use only a 120-volt outlet with grounding wire receptacle.

•Do not put it in rooms with high heat, damp or wet places.

•Best working condition is 10-40

0C.

• Level the unit well, never use unit when it is tilted or laying down.

•To reduce the risk of electric shock, this equipment has a grounding type plug that has a third (grounding) pin.

This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact qualified

personnel to install the proper outlet. Do not alter the plug in any way.

Unit Operation

• Do not insert fingers or foreign objects into the intake or air outlet.

• Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

• Do not block the air intake and air outlet. Never insert small things into the air intake/outlet.

• Do not use the air purifier if the power cord or plug is damaged or the connection to the wall outlet is loose.

• When removing the power plug, always hold the plug and never pull by the cord.

• Do not use the unit near or on hot objects, such as cooking range or where it may be exposed to steam.

• Stop the unit and unplug the power when moving or maintenance. Always hold the handles on the side

of the unit when moving it.

•To avoid causing fire and/or shock do not attempt to disassemble the unit - only certified technicians

should do this.

• Do not wash or reuse the HEPA-Rx filter and the Activated carbon filter.

WARNING

The internal UV-C lamp contains a small amount of

mercury which is contained inside the lamp unless

broken. Mercury and mercury compounds are known to

the State of California to cause cancer and birth defects or

other reproductive harm.

For more information go to www.P65Warnings.ca.gov

SAFETY PRECAUTIONS 2

This product complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume

(ppmv) in a 24-hour period. The Health Canada Guideline 2010 recommends that the maximum exposure limit,

based on an averaging time of 8 hours, is 0.020 ppmv or less when tested in a sealed, controlled room

approximately 30 m³.

Ce produit est conforme avec la concentration maximale permise d’ozone de 0,050 parties par million par

volume (ppmv) pendant une période de 24 heures. La Ligne directrice (2010) de Santé Canada recommande un

niveau maximal d'exposition, basé sur un moyen de 8 heures, soit 0,020 ppmv ou moins dans une chambre de

teste étanchée et contrôlée de 30 m³.

INTENDED USE

The JADE2.0 Air Purifier is intended to capture particles and microorganisms from the air.

UTILISATION PREVUE

Le purificateur d'air JADE2.0 est destine a capturer les particules et les micro-organismes de l'air.

DIRECTIONS FOR USE

Plug the power cord in and you will hear a "Beep". The smallinner circle will turn blue this indicates the air purifier is in

standby mode. Use your hand to wave over the sensor, this waving motion turns the unit on & off, and can also adjust the fan

speed.

MODE D'EMPLOI

Branchez le cordon d'alimentation et vous entendrez un (< bip ». Le petit cercle interieur deviendra vert - ce indique que le

purificateur d'air est en mode veille. Utilisez votre main pour agiler le capteur, ce mouvement d'ondulation allume et eteint

nite et peut egalement ajuster la vitesse du ventilateur.

DISPOSAL INSTRUCTIONS

Dispose of filters and UV-C+ bulbs according to local regulations based on location of use (e.g. medical waste if used in a

medical setting such as dental clinics, laboratories, etc.).

INSTRUCTIONS D'ELIMINATION

Eliminez les filtres conformement aux reglementations locales en fonction du lieu.

SAFETY PRECAUTIONS 3

WARNING - The internal UV-C+lamp contains a small amount of mercury which is contained inside the lamp

unless broken. Mercury and mercury compounds are known to the State of California to cause birth defects or other

reproductive harm. For more information, go to www.p65warnings.ca.gov.

The following safety warnings as per regulatory requirements of PCPA (Pest Control Products Act) in Canada:

Avertissements de securite selon Ies exigences reglementaires de Ia PCPA (Loi sur Ies produits antiparasitaires) au Canada.

PRECAUTIONS

- READ THE LABEL AND ANY OPERATING MANUAL BEFORE USE

- KEEP OUT OF THE REACH OF CHILDREN

-WARNING - UV radiation is only emitted internally in this device.

- Unintended use of the device, or damage to the housing, may result in exposure to ultraviolet radiation.

- Ultraviolet radiation may cause eye and skin irritation.

- Avoid exposing eyes and skin to ultraviolet radiation.

- The use of this device is a supplement to and not a substitute for standard infection control practices; users must continue

to follow all current infection control practices, including those practices related to cleaning and disinfection of

environmental surfaces.

FIRST AID INSTRUCTIONS

Clean the injury using soap and warm water, apply antibiotic ointment and a bandage, and watch for signs of infection.

INSTRUCTIONS DE PREMIERS SOINS

Nettoyez la blessure avec du savon et de l'eau tiede, appliquez une pommade antibiotique et un pansement et surveillez les

signes d'infection.

The air is purified in six stages:

1. NYLON NET PRE-FILTER

2. ULTRAFINE HEPA-Rx PARTICULATE FILTER

3. ACTIVATED CARBON FILTER

4. UV-C+ lamp

5. PHOTOCATALYTIC NANO-TiO2FILTER

6. REVITALIZING NEGATIVE ION CHAMBER

HOW IT WORKS

When the DC fan motor is running, the indoor air will be drawn through the bottom of the unit. The air will then

pass through the HEPA-Rx Filter, the Activated Carbon Filter, the UV-C+ and Photocatalytic Nano-TiO2 filter.

The purified air is then released through the outlet on the top of the unit. The Revitalizing Negative Ion

Generators near the air outlet releases revitalizing negative ions into the air.

FEATURES AND SPECIFICATIONS

The unit has a HEPA-Rx Filter (remove particles), Activated Carbon Filter (adsorb gases), UV-C+ lamp and

Super Oxidizing Photocatalytic Nano-TiO2 system (capturing VOC's and airborne pathogens)and two

Revitalizing Negative Ion generators.

Touch-free hand gesture operation

The JADE2.0 can be operated completely with the wave of your hand, making it suitable in medical settings

to avoid cross contamination.

Filters and UV-C+ Lamp Replacement Indicator Lights

The indicator lights tell you when to replace the HEPA-Rx filter, the Activated carbon filter or the UV-C+ lamp.

Safety and Easy Maintenance

The unit is also equipped with a safety interlock switch that will turn the power off if the bottom plate is opened.

When the filters need to be replaced, simply open the bottom plate and pull out the filters and put the new

ones in. No screws, hooks or tools are required.

Model No.

Power Requirement

Rated Power

Negative Ion

UV-C+ Lamp

Dimensions

Weight

JADE2.0 (SCA5100C)

120V, 60Hz

78W, 1.1A

3x106/cm³

10W

Φ31.6cm x H89.5cm (Φ12.4 inches x H35.2 inches )

14.5kg (31.9 pounds)

PART NAME

-01

-02

-03

-04

-05

-06

-09

-10

-11

-12

-14

-13

-15

-16

-07

-08

9- Particle laser sensor

10- HEPA-Rx filter

11- Activated carbon filter

12- UV-C+ lamp

13- Photocatalytic filter

14- Unit lock

15- UV-C+ lamp set

16- Bottom plate

01- Unit body

02- Unit housing

03- Air outlet

04- Fan motor

05- Fan blade

06- Ion generator

07- LED display

circuit board

08- Display panel

INSTALLATION

1. Power supply condition: Use only a 120-volt outlet with grounding wire receptacle.

2. Operational conditions: Temperature: 0℃~ 40℃; Relative humidity: <75%.

3. The unit should be installed in an indoor area.

Prior to using unit for the first time, you must remove the plastic bag from the HEPA-Rx filter inside the unit.

1. Turn unit upside down - put towel or any soft pad on the ground to avoid damage to the unit when you

turn it upside down.

2. Open unit from the bottom - turn counterclockwise to open bottom as pictured below (Pic.1).

3. After the bottom plate is removed, pull out the power cord of the UV-C+ lamp, open the unit lock (Pic. 2) and

take out the HEPA-Rx filter and the Activated carbon filter to remove the plastic cover.

5. Put the HEPA-Rx filter and Activated carbon filter back into unit. Align the blue arrow with blue arrow, turn

the unit lock clockwise until the blue arrow is aligned with the letter C on the bottom plate (Pic. 2)

6. Re-connect the UV-C+ power cord, install the unit bottom by rotating clockwise the same with the Step 5 ( Pic.1)

Before operation

1 2

OPEN

OPERATION 1

123

Plug the power cord in and you will hear a “Beep”. The small, inner circle will turn blue - this indicates the air

purifier is in standby mode. Use your hand to wave over the sensor, this waving motion turns the unit on & off,

and can also adjust the fan speed.

(Wave 1) Wave your hand the 1st time and the blue circle will turn white-

low speed.

(Wave 2) Wave a 2nd time, the second circle will light up - medium

speed.

(Wave 3) Wave a 3rd time, the third circle will light up - high speed.

(Wave 4) Wave a 4th time, all the circles light up white - turbo speed.

(Wave 5) Wave a 5th time, the “AUTO” indicator will light up.

This is Auto Mode -the unit will operate on low speed and will adjust

speeds accordingly based on what pollution the sensors pick upin the air

(See below pic.).

(Wave 6) Wave 6th time, the unit goes back to Standby Mode and the

inner circle turns back to blue.

Hover & hold your hand over the sensor for 2 seconds and this will lock the

unit at the desired speed. This will prevent accidental or unwanted speed changes.

To unlock this feature, hover & hold your hand over the sensor again for 2 seconds.

Indicator Color

Blue

Orange

Red

PM2.5

≤35μg/m³

36~150μg/m³

>150μg/m³

TVOC Level

Speed

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Surgically Clean Air Purificateur d'air

Surgically Clean Air

Surgically Clean Air ONYXsca Manuel utilisateur

Surgically Clean Air

Surgically Clean Air Carbon Granite SCA4000R Manuel utilisateur

Surgically Clean Air

Surgically Clean Air SCA7000E Guide de démarrage rapide

Surgically Clean Air

Surgically Clean Air Cascade White Manuel utilisateur

Surgically Clean Air

Surgically Clean Air CASCADE 6000C Manuel utilisateur

Surgically Clean Air

Surgically Clean Air JADE Manuel utilisateur

Surgically Clean Air

Surgically Clean Air Cascade White Manuel utilisateur

Surgically Clean Air

Surgically Clean Air AtomikAir Manuel utilisateur

Surgically Clean Air

Surgically Clean Air Cascade White Manuel utilisateur

Surgically Clean Air

Surgically Clean Air Carbon Granite SCA4000R Manuel utilisateur

Surgically Clean Air

Surgically Clean Air DE 2.0 Manuel utilisateur

Surgically Clean Air

Surgically Clean Air Sur301F Manuel utilisateur

Surgically Clean Air

Surgically Clean Air SCA7000H Guide de démarrage rapide

Surgically Clean Air

Surgically Clean Air Carbon Granite SCA4000R Manuel utilisateur

Surgically Clean Air

Surgically Clean Air Cascade White Manuel utilisateur

Surgically Clean Air

Surgically Clean Air SCA9000 Manuel utilisateur

Surgically Clean Air

Surgically Clean Air Carbon Granite SCA4000R Guide de démarrage rapide

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Sharp

Sharp FU-40SE Manuel utilisateur

Philips

Philips AC2721 Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur

vollara

vollara Air & Surface Pro+ Manuel utilisateur