Sennheiser Active Transmitter Combiner 8:1 AC 3200 Manuel utilisateur

Active Transmitter Combiner 8:1

AC 3200

Instruction manual

Contents

Important safety instructions ..................................................... 2

The AC 3200 active transmitter combiner 8:1 ......................... 5

Delivery includes ............................................................................. 5

Connection diagram ....................................................................... 6

Product overview ............................................................................ 7

Putting the AC 3200 into operation ........................................... 8

Preparing the AC 3200 for use ............................................... 8

Connecting the antenna ......................................................... 10

Connecting a transmitter to the AC 3200 .......................... 10

Connecting the mains cable .................................................. 11

Switching the AC 3200 on and off ....................................... 11

Recommendations and tips for optimum reception ............ 12

Cleaning the AC 3200 ................................................................... 12

If a problem occurs ... ................................................................... 13

Accessories and spare parts ....................................................... 14

Specifications ................................................................................. 15

Manufacturer Declarations ......................................................... 16

Important safety instructions

1. Read these instructions.

2. Keep these instructions. Always include these instructions when passing the

device on to third parties.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use the device near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with these

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other devices (including amplifiers) that produce heat.

9. The device should be operated only from the type of power source indicated on

the mains plug. The device must only be connected to properly grounded power

outlets.

10. Protect the mains cable from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where it exits from the device.

11. Only use attachments/accessories specified by Sennheiser.

12. Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the device. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug the device during lightning storms or when unused for long periods of

time.

14. Refer all servicing to qualified service personnel.

Servicing is required if the device has been damaged in any way, such as mains

cable or plug damage, liquid has been spilled, objects have fallen inside, the

device has been exposed to rain or moisture, does not operate properly or has

been dropped.

15. To completely disconnect the device from the AC mains, disconnect the mains

plug from the AC receptacle.

16. WARNING: To reduce the risk of fire or electric shock, do not expose the device to

rain or moisture.

17. Do not expose the device to dripping or splashing and ensure that no objects

filled with liquids, such as vases or coffee cups, are placed on the device.

18. The plug of the mains cable shall remain readily operable and easily accessible.

Important safety instructions

Hazard warnings on the rear of the

AC 3200 active transmitter combiner 8:1

The label shown on the left is attached to the rear of the

AC 3200. The symbols on this label have the following meaning:

This symbol is intended to alert the user to the presence of

uninsulated dangerous voltage within the AC 3200’s enclosure

that may be of sufficient magnitude to constitute risk of fire or

electric shock.

This symbol is intended to alert the user to the risk of electric

shock if the AC 3200 is opened. There are no user serviceable

parts inside. Refer servicing to qualified personnel only.

This symbol is intended to alert the user to the presence of

important operating and maintenance instructions in the

literature accompanying this AC 3200.

Overloading

Do not overload wall outlets and extension cables as this may

result in fire and electric shock.

Replacement parts

When replacement parts are required, be sure the service

technician has used replacement parts specified by Sennheiser

or those having the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or

other hazards.

Safety check

Upon completion of any service or repairs to this device, ask the

service technician to perform safety checks to determine that

the device is in a safe operating condition.

Important safety instructions

Intended use of the device

Intended use of the AC 3200 includes:

yusing the device for professional purposes,

yhaving read this instruction manual especially the chapter

“Important safety instructions” on page 2,

yusing the device within the operating conditions and

limitations described in this instruction manual.

“Improper use” means using the device other than as described

in this instruction manual, or under operating conditions which

differ from those described herein.

The AC 3200 active transmitter combiner 8:1

The

AC 3200

active transmitter

combiner 8:1

With the AC 3200 active transmitter combiner, the signals of up

to eight Sennheiser wireless monitoring transmitters can be

combined onto a single antenna, e.g. the A 2003 UHF

directional antenna, the A 1031 U omni-directional antenna or

the A 5000 CP circularly polarized UHF antenna. For suitable

transmitters, please refer to the AC 3200 product page at

www.sennheiser.com.

The AC 3200 allows you to make high-quality 8-channel

transmission systems suitable for the following areas of

application:

yMulti-channel monitoring systems for stage use

yMulti-channel systems suitable for any application where

talk-back signals are to be transmitted (e.g. studio)

Delivery includes

1 AC 3200 active transmitter combiner 8:1

3 mains cable (EU/UK/US)

4 self-adhesive device feet

1 instruction manual

Connection diagram

The below connection diagram shows the connections for an

8-channel system with a single antenna.

AC 3200

Product overview

쐃Rack mount “ears”

쐇Air vents (on the sides)

쐋8 LEDs: operation indicators of the RF inputs

쐏LED

쐄On/off switch

쐂IEC mains socket

쐆8 RF inputs RF IN 1 to RF IN 8 for connecting the transmitters

쐊BNC socket for antenna output ANT

70 W



쐋쐏

쐂 쐊

쐆쐆쐆

쐆

쐇쐇

쐃

쐄

쐃

Putting the AC 3200 into operation

Putting the AC 3200 into

operation

Preparing the AC 3200 for use

You can set up the AC 3200 on an even surface or mount it into

a 19" rack.

Setting up the device

To ensure that the AC 3200 cannot slip on the surface on which

it is placed, four self-adhesive soft rubber feet are supplied.

CAUTION! Danger of heat damage to the devices!

During operation, the AC 3200 and the connected

transmitters produce considerable waste heat!

If this heat cannot dissipate, it can cause damage

to the devices!

The devices are equipped with fans to assist

dissipation of generated heat:

왘Make sure that the air vents 쐇on the sides of

the AC 3200 are not covered or blocked and

provide ducts of sufficient size or allow

sufficient space to ensure a free air flow

between the devices.

왘Regularily clean the air vents on the sides of

the AC 3200 with a soft brush.

왘In order to avoid heat accumulation, make sure

to install the AC 3200 as the uppermost device.

왘Never stack more than two devices directly one

above the other!

CAUTION! Risk of staining of surfaces!

Some surfaces have been treated with varnish,

polish or synthetics which might cause stains

when they come into contact with other

synthetics. Despite a thorough testing of the

synthetics used by us, we cannot rule out the

possibility of staining.

왘Do not place the AC 3200 on delicate surfaces.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sennheiser Émetteur

Sennheiser

Sennheiser SP230 Manuel utilisateur

Sennheiser

Sennheiser AC 3200-II High Gain Manuel utilisateur

Sennheiser

Sennheiser TI 200 Manuel utilisateur

Sennheiser

Sennheiser S 550 Manuel utilisateur

Sennheiser

Sennheiser SKP 100 Manuel utilisateur

Sennheiser

Sennheiser ew 300 G2 Manuel utilisateur

Sennheiser

Sennheiser SK 5012 Dimensions

Sennheiser

Sennheiser SR 300 IEM Manuel utilisateur

Sennheiser

Sennheiser SKM 2020-D Dimensions

Sennheiser

Sennheiser BF 1053 Manuel utilisateur

Sennheiser

Sennheiser AC 2 Manuel utilisateur

Sennheiser

Sennheiser AC 3200 - 09-08 Manuel utilisateur

Sennheiser

Sennheiser SR 2020-D Dimensions

Sennheiser

Sennheiser HDI 406 - ANNEXE 69 Manuel utilisateur

Sennheiser

Sennheiser SKP 100 G3 Manuel utilisateur

Sennheiser

Sennheiser SK 2000 Manuel utilisateur

Sennheiser

Sennheiser SKM 3072-U-X Manuel utilisateur

Sennheiser

Sennheiser AC 3000 Manuel utilisateur

Sennheiser

Sennheiser TVC2-TX Manuel utilisateur

Sennheiser

Sennheiser SR 2000 IEM Manuel utilisateur

Sennheiser

Sennheiser SK 1013-6-1 Manuel utilisateur

Sennheiser

Sennheiser SZI 1015-T Manuel utilisateur

Sennheiser

Sennheiser SK 3063 Dimensions

Sennheiser

Sennheiser SK 300 Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur