Sealey AP2401 Manuel utilisateur

INSTRUCTIONS FOR

TOP CHEST

MODEL NO’S: AP2401 & AP2403

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this product.

8DO NOT open more than one drawer at a time.

8DO NOT step on the drawers.

8DO NOT let children near the tool chest.

8DO NOT use in damp areas.

9Ensure drawers are fully closed and the self locking catch is activated before moving the tool chest.

9Keep the work area clean and ensure there is adequate lighting.

WARNING! The warnings, cautions and referred to in this instruction manual cannot cover all possible conditions and situations that may

occur. It must be understood that common sense and caution are factors that can not be built into this product, but must be applied by the

operator.

2. INTRODUCTION

Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and

carry heavier loads. Each drawer tted with catch to prevent unexpected opening, when being transported around the workshop. Added security

provided by side mounted cylinder locks, supplied with two keys. Recessed handles permit units to be slotted in work environments where space

is tight. Rust and solvent resistant powder coat paint nish. Fitted with anti-shock protection on all four corners to prevent accidental damage.

Tough composite top allows these units to be used as a workstation.

3. SPECIFICATION

AP2401, AP2403| Issue:2 (L) 15/06/17

Original Language Version

Refer to

instruction

manual

AP2401 AP2403

Model No AP2401 AP2403

Overall Size

Width 690mm

Depth 465mm

Height 400mm 535mm

Drawers (Qty) 46

Drawer Width 535mm

Drawer Depth 400mm

Drawer Height 60mm

Optional Accessories

Model No Description

AP24ACC6 Drawer Divider 3 x 395 x 58mm

AP24ACC9 Short Hook Set x 10pcs

AP24ACC10 Medium Hook Set x 10pcs

4. OPERATION

4.1. Each drawer is fitted with a catch mechanism on the right hand side of the drawer underneath the handle. To open drawer push the catch

to the left to release the catch and pull the drawer open (fig.1).

WARNING! Only open one drawer at a time.

4.2. Before moving the tool chest ensure that the drawers are closed and locked (fig.2) to prevent accidental opening.

Fig.1 Fig.2

AP2401, AP2403| Issue:2 (L) 15/06/17

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

according to local regulations.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sealey Rangement des outils

Sealey

Sealey CX1042D Manuel utilisateur

Sealey

Sealey AP41104BWS Manuel utilisateur

Sealey

Sealey AP6310 Manuel utilisateur

Sealey

Sealey APMS60 Manuel utilisateur

Sealey

Sealey CX103 Manuel utilisateur

Sealey

Sealey FWB1.V3 Manuel utilisateur

Sealey

Sealey PTB104008 Manuel utilisateur

Sealey

Sealey PTB181510 Manuel utilisateur

Sealey

Sealey AP165WB Manuel utilisateur

Sealey

Sealey AP28102BR Manuel utilisateur

Sealey

Sealey AP1205 Manuel utilisateur

Sealey

Sealey Power Products API1500 Manuel utilisateur

Sealey

Sealey AP2405 Manuel utilisateur

Sealey

Sealey AP12160 Manuel utilisateur

Sealey

Sealey AP1248SS.V2 Manuel utilisateur

Sealey

Sealey AP2416.V2 Manuel utilisateur

Sealey

Sealey AP2200BB Series Manuel utilisateur

Sealey

Sealey AP26059TBRG Manuel utilisateur

Sealey

Sealey SL1D.V2 Manuel utilisateur

Sealey

Sealey AP2050 Manuel utilisateur

Sealey

Sealey AP2418.V2 Manuel utilisateur

Sealey

Sealey SC01.V2 Manuel utilisateur

Sealey

Sealey AP4707S Manuel utilisateur

Sealey

Sealey AP2405 Manuel utilisateur

Manuels Rangement des outils populaires d'autres marques

Ryobi

Ryobi RWB03 Manuel utilisateur

Husky

Husky H27CH5TR4BGK Manuel utilisateur

Scheppach

Scheppach ts 2100 Manuel utilisateur

Cornwell Tools

Cornwell Tools CTB360AKBK Manuel utilisateur

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur

Cassese

Cassese CS200 CART Manuel utilisateur

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuel utilisateur

Lista

Lista Align Instructions de montage

Workzone

Workzone 99609 Manuel utilisateur

Stanley

Stanley STST83800-1 Manuel utilisateur

Homak

Homak PROFESSIONAL Series Manuel du système

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuel utilisateur

Husky

Husky H5CH2R Manuel utilisateur

BGS technic

BGS technic 4107 Manuel utilisateur

Clarke

Clarke CWB1250 Manuel utilisateur

Ryobi

Ryobi RWB02 Manuel utilisateur

Husky

Husky H52CH6HDV3WHT Manuel utilisateur

General International

General International Excalibur 40-100 Manuel de la liste des pièces