Sealey P0618.V2 Manuel utilisateur

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this workbench.

9Locate workbench in a suitable work area.

9Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use workbench on level and solid ground, preferably concrete.

9Keep the workbench clean and tidy in accordance with good workshop practice.

9Keep children and unauthorised persons away from the work area.

8DO NOT use the workbench for any purpose other than that for which it is designed.

8DO NOT use the workbench outdoors.

8DO NOT place the workbench in a damp or wet location or an area where there is condensation.

8DO NOT clean the workbench with any solvents which may damage the surfaces or the protective coating.

8DO NOT move the workbench when there are items placed on it.

8DO NOT overload the workbench.

8DO NOT undertake work on the workbench without the workpiece being adequately secured. Use clamps or a vice (not included but available from

your Sealey dealer), to secure the workpiece.

WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that

may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the

operator.

2. INTRODUCTION

25mm Thick wood top, used for added extra rigidity and durability. Powder coated steel frame, for added corrosion resistance.

Four adjustable feet for levelling on uneven ground.

Dimensions: Width: 1800mm, Depth: 600mm, Height: 910mm. Maximum Capacity: 500kg - evenly distributed.

3. CONTENTS

Unpack the contents and check against the parts list. If there are any parts missing, contact your Sealey dealer.

Part No. Part Name Quantity

1 Table Top 1

2 H Leg Frame 2

3 Horizontal Back Brace 1

4 M8 x 70mm Pan Head Bolt 12

5 M8 Nut 12

AP0618.V2 Issue 2 27/01/16

Original Language Version

INSTRUCTIONS FOR:

WORKBENCH 1.8MTR STEEL WITH 25MM

WOODEN TOP

MODEL NO: AP0618.V2

Refer to

Instruction

Manual

4. ASSEMBLY

4.1. Assemble the workbench following the sequence below, referencing the parts list overleaf.

4.2.  Laythewholepackagedownonthegroundwiththetabletop(1)facingdown,seeg.1.

4.3. Lift the H leg frames (2) upright as per the above diagram and insert the leg frames (2) into the slots on each side of the table top (1),

 seeg.1.

4.4.  Fixthelegframes(2)tothetabletop(1)usingpanheadbolts(4)andhexnuts(5),seeg.1.

4.5.  Turntheworkbenchsoitistherightwayup,seeg.2.

4.6.  Attachthehorizontalbackbrace(3)andxittothelegframes(2)usingpanheadbolts(4)andhexnuts(5),seeg.2.

4.7.  Assemblyisnowcompleteandtheworkbenchisreadytouse,seeg.3.

Fig.2

Fig.1

Fig.3

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Sole UK Distributor, Sealey Group.

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk.

IP32 7AR

www.sealey.co.uk

sales@sealey.co.uk

01284 757500

01284 703534

Web

AP0618.V2 Issue 2 27/01/16

Original Language Version

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

Parts support is available for this product. To obtain a parts listing and/or diagram,

please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.

Table des matières

Autres manuels Sealey Rangement des outils

Sealey

Sealey APLHT Manuel utilisateur

Sealey

Sealey POWER PRODUCTS AP1010.V2 Manuel utilisateur

Sealey

Sealey AP28104 Manuel utilisateur

Sealey

Sealey APMSV Series Manuel utilisateur

Sealey

Sealey FWB1.V3 Manuel utilisateur

Sealey

Sealey AP12160 Manuel utilisateur

Sealey

Sealey AP165WB Manuel utilisateur

Sealey

Sealey SCR92 Manuel utilisateur

Sealey

Sealey SC01.V2 Manuel utilisateur

Sealey

Sealey AP2513B.V4 Manuel utilisateur

Sealey

Sealey AP1520 Manuel utilisateur

Sealey

Sealey APMS20 Manuel utilisateur

Sealey

Sealey PTB104008 Manuel utilisateur

Sealey

Sealey API Series Manuel utilisateur

Sealey

Sealey AP2200BB.V2 Manuel utilisateur

Sealey

Sealey AP1010 Manuel utilisateur

Sealey

Sealey AP1248SS Manuel utilisateur

Sealey

Sealey AP223 Manuel utilisateur

Sealey

Sealey Power Products API1500 Manuel utilisateur

Sealey

Sealey SM30.V2 Manuel utilisateur

Sealey

Sealey PTB181510 Manuel utilisateur

Sealey

Sealey AP2418.V2 Manuel utilisateur

Sealey

Sealey AP28102BR Manuel utilisateur

Sealey

Sealey AP22 Series Manuel utilisateur

Manuels Rangement des outils populaires d'autres marques

Ryobi

Ryobi RWB03 Manuel utilisateur

Husky

Husky H27CH5TR4BGK Manuel utilisateur

Scheppach

Scheppach ts 2100 Manuel utilisateur

Cornwell Tools

Cornwell Tools CTB360AKBK Manuel utilisateur

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur

Cassese

Cassese CS200 CART Manuel utilisateur

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuel utilisateur

Lista

Lista Align Instructions de montage

Workzone

Workzone 99609 Manuel utilisateur

Stanley

Stanley STST83800-1 Manuel utilisateur

Homak

Homak PROFESSIONAL Series Manuel du système

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuel utilisateur

Husky

Husky H5CH2R Manuel utilisateur

BGS technic

BGS technic 4107 Manuel utilisateur

Clarke

Clarke CWB1250 Manuel utilisateur

Ryobi

Ryobi RWB02 Manuel utilisateur

Husky

Husky H52CH6HDV3WHT Manuel utilisateur

General International

General International Excalibur 40-100 Manuel de la liste des pièces