Sealey AP0618 Manuel utilisateur

INSTRUCTIONS FOR:

WORKBENCH 1.8MTR STEEL WITH

25MM RUBBERWOOD TOP

MODEL No: AP0618

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

2. INTRODUCTION

3. CONTENTS

1.1. GENERAL SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when

using this workbench.

Locate workbench in a suitable work area.

Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use workbench on level and solid ground, preferably concrete.

Keep the workbench clean and tidy in accordance with good workshop practice.

Keep children and unauthorised persons away from the work area.

DO NOT use the workbench for any purpose other than that for which it is designed.

DO NOT use the workbench outdoors.

DO NOT place the workbench in a damp or wet location or an area where there is condensation.

DO NOT clean the workbench with any solvents which may damage the surfaces or the protective coating.

 DO NOT move the workbench when there are items placed on it.

 DO NOToverload the workbench.

 DO NOT undertake work on the workbench without the workpiece being adequately secured. Use clamps or a vice (not

included) to secure the workpiece (available from your Sealey dealer).

WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions

and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this

product, but must be applied by the operator.

25mm Thick wood top, used for added extra rigidity and durability. Powder coated steel frame, for added corrosion resistance.

Four adjustable feet for levelling on uneven ground.

Dimensions: Width: 1805mm, Depth: 605mm, Height: 910mm. Maximum Capacity: 500kg - evenly distributed.

Unpack the contents and check against the parts list. If there are any parts missing, contact your Sealey dealer.

Part No. Part Name No. of

1 Table Top 1

2 H Leg Frame 2

3 Horizontal Brace 1

4 M8 x 70mm Pan Head Hex Bolt 12

Original Language Version AP0618 Issue: 1 - 19/09/12

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business

Park, Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

4.1. Assemble the workbench following the sequence below, referencing the parts list overleaf.

4. ASSEMBLY

Original Language Version AP0618 Issue: 1 - 19/09/12

Fig.1 Fig.2

Fig.3

4.2. Lay the table top face downwards. Insert one H frame

 intothegroovesatoneendofthetabletopandxin

place using 4 hex bolts. Repeat wit the other H frame.

4.3. Standtheworkbenchontoit'slegs.Locateandtbrace 

to the rear legs using four hex bolts. The workbench is

ready to use.

Table des matières

Autres manuels Sealey Rangement des outils

Sealey

Sealey PTB104008 Manuel utilisateur

Sealey

Sealey AP2050 Manuel utilisateur

Sealey

Sealey AP1248SS Manuel utilisateur

Sealey

Sealey PTB91508 Manuel utilisateur

Sealey

Sealey PCT1 Manuel utilisateur

Sealey

Sealey APMS60 Manuel utilisateur

Sealey

Sealey AP2200BB.V2 Series Manuel utilisateur

Sealey

Sealey APMS58 Manuel utilisateur

Sealey

Sealey AP26059TW Manuel utilisateur

Sealey

Sealey AP2200BB.V2 Manuel utilisateur

Sealey

Sealey AP1200MW Manuel utilisateur

Sealey

Sealey APMSV Series Manuel utilisateur

Sealey

Sealey AP3508TB Manuel utilisateur

Sealey

Sealey AP6310BE Manuel utilisateur

Sealey

Sealey MCW360 Manuel utilisateur

Sealey

Sealey APLHT Manuel utilisateur

Sealey

Sealey POWER PRODUCTS AP1010.V2 Manuel utilisateur

Sealey

Sealey AP1520.V2 Manuel utilisateur

Sealey

Sealey AP3020 Manuel utilisateur

Sealey

Sealey AP26479TBRG Manuel utilisateur

Sealey

Sealey AP2030 Manuel utilisateur

Sealey

Sealey SM30.V2 Manuel utilisateur

Sealey

Sealey AP26059TBRG Manuel utilisateur

Sealey

Sealey APMS01 Manuel utilisateur

Manuels Rangement des outils populaires d'autres marques

Ryobi

Ryobi RWB03 Manuel utilisateur

Husky

Husky H27CH5TR4BGK Manuel utilisateur

Scheppach

Scheppach ts 2100 Manuel utilisateur

Cornwell Tools

Cornwell Tools CTB360AKBK Manuel utilisateur

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur

Cassese

Cassese CS200 CART Manuel utilisateur

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuel utilisateur

Lista

Lista Align Instructions de montage

Workzone

Workzone 99609 Manuel utilisateur

Stanley

Stanley STST83800-1 Manuel utilisateur

Homak

Homak PROFESSIONAL Series Manuel du système

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuel utilisateur

Husky

Husky H5CH2R Manuel utilisateur

BGS technic

BGS technic 4107 Manuel utilisateur

Clarke

Clarke CWB1250 Manuel utilisateur

Ryobi

Ryobi RWB02 Manuel utilisateur

Husky

Husky H52CH6HDV3WHT Manuel utilisateur

General International

General International Excalibur 40-100 Manuel de la liste des pièces