SC&T IP01 Manuel utilisateur

IP CABLING TRANSMISSION – Passive

ITEM NO.: IP01K = (IP01 4 units + IP01H 1 unit)

IP01：IP Extender over Coax

IP01H：Ethernet Switch with 4Port 10Base-T+ 1Port 10/100Base E

IP01 is a low cost and easy, speedy solution to allow you use existing coax cable to send IP

camera signal. Used in pairs with your RG59 cable to exceed the IEEE 802.3 10BaseT NEXT

specification. The working range could up to 200 meters at 10Mbps speed.

IP01H 4 port Ethernet Switch is special design and built in 4 pieces IP01 (IP extender over coax)

with BNC interface to send and extender TCP/IP signal over coaxial cable. Used in set with IP01

at IP camera side or any TCP/IP equipment, to send the IP signal up to 200 meters over your

existing coax cable. 4 BNC port based on 10Mbps transmission speed, 1 port RJ45 to your

NVR/computer based on 10/100Base-T.

IP01K：4 x IP01 IP extender + 1 x IP01H 4 Port Ethernet Switch Kit Package

Package include：4 pieces x IP01, 1pcs x IP01H with power adapter.

Installation View:

IP01

IP01

IP01H

IP01

IP01

Caution: IP01H unit with BNC male terminator at channel 2, 3, 4.

Do not remove the terminator if you do not use these channels.

Otherwise, it will cause this Switch not working.

Related model:

1

FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV

IP01：IP Extender over Coax

Send IP camera signal over existing coaxial cable.

Passive, no power required.

Exceeds 802.3 10BaseT NEXT specification, isolating the receiver from the transmitted

signal.

Transmission up to 200 meters (Max).

IP01H：Ethernet Switch with 4Port 10Base-T+ 1Port 10/100Base

4 Port Ethernet Switch with 4 port BNC and 1 port RJ45.

RJ45 terminal support 10/100Mbps auto detect function

BNC terminal support 10Mbps, must work with IP01.

LED indication: Link/Active, Power.

Complies with standard IEEE802.3 and IEEE802.3u.

Auto MDI/MDI-X auto cross at RJ45 terminal.

P

anel View:

IP01

Front Rear

IP01H

Front Rear

Specification:

ITEM NO. IP01

VIDEO INPUT (BNC female Connector)

1

Connector BNC Female Connector to RJ45 Jack

Impedance 50Ωto dual 100Ωor 75Ωto dual 100Ωor 93Ωto dual 100Ω

Crosstalk > 30 dB

Cable Coax Cable (RG59)

DIMENSIONS W x H x D mm 69x25x22

ITEM NO. IP01H

Speed 10Base-T and 100Base-TX

Connector BNC x 4, RJ45 x 1

Power Supply DC5V 1A

Power Consumption 500mA

Storage Temperature -30℃~70℃

Operation Temperature -10℃~45℃

Dimensions W x H x D mm 125×121×30（mm）

Weight g 400g

Material Metal Black

2

FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels SC&T Extenseur

Manuels Extenseur populaires d'autres marques

SY

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuel utilisateur