SC&T IP02EPT Manuel utilisateur

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels SC&T Extenseur

Manuels Extenseur populaires d'autres marques

SY

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuel utilisateur

1

IP CABLING TRANSMISSION –Active Series

ITEM NO.: IP02EP IP Extender with Power over Coax 500M

IP02EP IP extender is designed to extend any TCP/IP devices for long range transmission up to 500M over

existing coaxial cable. The benefit could send power to camera use over same coax cable. It is perfect to

add one IP camera with power over existing CCTV analog video camera environment. It is a great

surveillance solution for sending IP video links to remote camera installation that are beyond the 100 meters

distance limit of Ethernet and also provide camera power together.

IP02EP IP Extender with Power over Coax 500M

Extend IP camera signal and power together over existing coaxial cable.

Provide power to IP camera DC5V or DC12V.

Long range transmission up to 500 meters (Max.)

Support 10/100BASE-T transmission rate.

Perfect to upgrade the analog camera system into IP CCTV application.

Plug and play for easy installation.

Installation View:

1. Connect IP02PT, IP02PR with coax cable at both ends before powering.

2. Power input use external DC 48V adapter to provide IP camera power DC5V/DC12V.

To make sure the transmission quality, you could setup the DIP Switch based on the cable distance,

a longer distance setup to lower data rate; a short distance could be setup at higher data rate.

Cable:

Link cable use high quality 75Ω coaxial cable.

RJ45 Define:

Ethernet Cable (Use TIA/EIA-568-B)

1. Orange-White TX+

2. Orange TX-

3. Green-White RX+

4. Blue Reserve

5. Blue-White Reserve

ETHERNET

DC OUT

DC 5V or DC 12V

2

6. Green RX-

7. Brown-White Reserve

8. Brown Reserve

DIP Switch Setting：

IP02ET Uplink data rate setting

１２

↑↑ 21Mbps (default)

↓↑ 25Mbps

↑↓ 28Mbps

↓↓ 36Mbps

IP02ER Uplink data rate setting

１２

↑↑ 3Mbps (default)

↓↑ 4Mbps

↑↓ 9Mbps

↓↓ 11Mbps

LED Indication:

Green ：Power ON/OFF

Blue : Power output DC 5V

Red : Power output DC12V

Yellow ：Ethernet 10/100Mbps linking

Green ：Flash →Data transmission

Panel View:

IP02EPT

IP02EPR

3

Specifications:

ITEM NO.

IP02EPT

IP02EPR

Transmission Interface

RJ45 x 1(Ethernet) ,BNC x 1 (75 Ω)

Power Input Connector

BNC ( DC48V)

DC JACK 2.0mm x 1

(DC 48V 0.83A 40W)

Power Output Connector

DC JACK 2.5mm x 1

(DC 5V 2A，DC 12V 1A)

BNC ( DC48V)

Data , Power Switch

DIP SW 2P2 x 1,SLIDE SW 2 step x 1

DIP SW 2P2 x 1

LED Indication

RJ45 (Yellow/Green) x 1

Power (Green) x 1, Power output

(Blue/Red) x1

RJ45 ( Yellow/Green)

Power ( Green) x 1

Linking Cable

75Ω coax cable

Ethernet Speed

10/100 Mbps

Data Rate

Uplink：36Mbps , Downlink：11Mbps

Uplink：11Mbps, Downlink:36Mbps

Transmission Distance

500 M (Max)

Power Consumption

28W

28W

Temperature

Operation: 0 to 70℃, Storage: -20 to 85℃, Humidity: up to 95%

Dimension mm

67 x 102 x 27

67 x 103.7 x 27

Weight g

180

180

Rev.A