Sanus DMF215 Manuel utilisateur
Our US-based
install experts
are standing
by to help.
Call us at:
888-333-9952
Get it right the
first time.
HeightFinder™
shows you
where to drill.
Check it out at:
SANUS.com/1174
Want to watch
a video that
shows how
easy this DIY
project will be?
Watch it now at:
SANUS.com/2888
Recommended placement
WE’RE HERE TO HELP
DMF215
INSTRUCTION MANUAL
Para Español ver página 20
DMF215
2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit MountFinder.sanus.com or call
1-888-333-9952 to find a compatible mount.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
50 lbs.
(22.6 kg)
Ready to begin?
Does your TV
(including accessories)
weigh more than
50 lbs. (22.6 kg)?
Drywall with
wood studs?
Solid concrete or
concrete block?
Perfect!
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder
Screwdriver
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill Hammer
1/2 in.
(13 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Unsure?
Call Customer Service: 1-888-333-9952
Concrete kit CMK1 (not included)
CAUTION:
DO NOT
install into
drywall alone
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-888-333-9952.
CAUTION: Avoid potential personal injury or property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●This product is designed for INDOOR USE ONLY
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
3
Dimensions
7.87in
200mm
3.94in
100mm
15.75in
400mm
11.81in
300mm
.34in
8.7mm
4.02in
102mm
.99in
25.2mm
45deg 45deg
5deg
15deg
15.0in
381mm
9.06in
230mm
8.27in
210mm
2.91in
74mm
.33in
8.4mm
3.1in
78mm
2.8in
71mm
WITHOUT EXTENSION
BRACKETS
17.07in
433.7mm
17.07in
433.7mm
6deg
TV INTERFACE
WALL PLATE
ROLL CONTROL
TOP VIEW - EXTENDED
TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
SIDE VIEW - RETRACTED
3-D
Before getting started, let’s make sure this mount is perfect for you!
4
M4 x 12mm
M6 x 12mm M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 20mm
M8 x 12mm M8 x 40mm
2.5mm
M4 M6/M8
22mm
5mm M8 x 30mm M8 x 50mm
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
01
Faceplate
TV Screws
Washers Spacers
TV Bracket
Extender
TV Bracket
Screw
09 x4 10 x4
13 x4
12 x4
11 x4
14 x4 15 x4
17 x4
16 x4
04 x4 05 x4 06 x4 08 x4
03 x8
x1
02 x4
07 x4
5
5/16 x 2¾ in.
.
t
M5 x 6mm
5/16 x 2¾ in.
Fischer UX10 x 60R Anchor
STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED]
STEP 2 Parts and Hardware
STEP 3 Parts and Hardware
Nut Cap
18 x1 19 x1
Full Motion Arm
Wall Plate
Template
Lag Bolt
Lag Bolt
Concrete Anchor
C1
x2
C2
x2
20 x2
22 x1
21 x1 23 x1
Washer
Contact Customer Service at 1-888-333-9952 to have these
additional pieces shipped directly to you.
Locking Screw
6
cm
inches
cm
inches
inch dimensions are approximate
inches cm mm
3 7.5 75
4 10 100
7 ⅞ 20 200
11 ¾ 30 300
15 ¾ 40 400
W
H
STEP 1 Attach Faceplate to TV
1.1 Measure Your TV Hole Pattern 1.2 Assemble Your Faceplate
Measure the width and height of your TV
hole pattern in mm.
Record your measurements:
Width_______mm x Height_______mm
Based on your TV hole pattern measurements
(Wmm x Hmm), determine your Faceplate
configuration: A, B, C, D or E.
A
200
[7 ⅞ in.]
200
[7 ⅞ in.]
400
[15¾ in.]
400
[15¾ in.]
B
These smaller hole patterns only use
Faceplate 01 . Do not use the four TV
brackets 02 and eight screws 03 .
02
100
[4 in.]
100
[4 in.]
03
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
02
01
01
03
300
[11 ¾ in.]
300
[11 ¾ in.]
02
100 x 100
200 x 100
200 x 200
For TV Hole Pattern
Measurements
(Dimensions in mm)
300 x 300
400 x 400
For TV Hole Pattern
Measurements
(Dimensions in mm)
7
03
D E
03
200
[7 ⅞ in.]
200
[7 ⅞ in.]
01
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
01
02
02
02
02
C
03
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
02
02
01
400
[15¾ in.]
400
[15 ¾ in.]
400
[15¾ in.]
300
[11 ¾ in.]
300
[11 ¾ in.]
300
[11 ¾ in.]
400 x 300
For TV Hole Pattern
Measurements
(Dimensions in mm)
300 x 200
400 x 200
For TV Hole Pattern
Measurements
(Dimensions in mm) 200 x 300
200 x 400
For TV Hole Pattern
Measurements
(Dimensions in mm)
or required.
8
Too Long
Too Short
Correct
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
Standard configurations
are shown. For special
applications, or ifyou
are uncertain aboutyour
hardware selection, contact
Customer Service.
CAUTION:
Verify adequate thread
engagementwith yourscrew/
washer/spacercombination
AND TV bracket.
–Too short will not holdthe TV.
–Too long will damage the TV.
M4
M6
M8
ab
a:For flat-back TVs,
no spacers 06 07
,
08
b:Spacers 06 and,
07 08 supplied for:
●Round (irregular) back TVs
●Extra space needed (forcables
or inset mounting holes)
FLAT BACK ROUND BACK CABLES INSET HOLES
Test the four TV screw diameters (M4,
M6, and M8) in the threaded inserts on
the back of your TV to determine which
screw diameter fits your TV.
08
0706
06 07 08
9
1.5 Attach TV Bracket
TV Bracket Configuration B
Illustrated (with spacers) 04 05
04 05
a: Flat Back
b: Round Back / Extra Space
TV Bracket Configuration A
Illustrated (with spacers)
Positionyour TV bracket configuration (A, B, C, Dor E) onto your TV, making sure the bracketis both centered and level overyour TV hole pattern.
NOTE: The hanging tab Hon faceplate 01 must be oriented toward the top of the TV.
Secure the TV bracket using your selection: (a) screw/washer or (b) screw/washer/spacer.
CAUTION:Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to
secure the TVbracket to the TV. DO NOT overtighten thescrews.
H
01
17
17
09
09
01
01
02
10
center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
1. Locate your stud. Verify and mark the
2. Position the template 18at your desiredheight and line up the holes with your stud center line. Level the template and tape in place.
≤ 5/8 in.
(16 mm)
STEP 2A Attach Wall Plate to Wall Wood Stud Installation
CAUTION: Avoid potential personal injury or property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½x 3 ½in. (38 x 89 mm)
21
18
Table des matières
Autres manuels Sanus Support TV
Sanus
Sanus Classic MLT15 Manuel utilisateur
Sanus
Sanus HMF115 Manuel utilisateur
Sanus
Sanus Sanus VisionMount LL11-B1 Manuel utilisateur
Sanus
Sanus VXT7-B2 Manuel utilisateur
Sanus
Sanus VLL5 Manuel utilisateur
Sanus
Sanus MMF12b Manuel utilisateur
Sanus
Sanus BML1 Manuel utilisateur
Sanus
Sanus VXF730-B2 Manuel utilisateur
Sanus
Sanus VDLT17 Manuel utilisateur
Sanus
Sanus VLF320 Manuel utilisateur
Sanus
Sanus FTVS1 Manuel utilisateur
Sanus
Sanus VLT7-B3 Manuel utilisateur
Sanus
Sanus HLT1 Manuel utilisateur
Sanus
Sanus VMPL3 Manuel utilisateur
Sanus
Sanus VDLT16 Manuel utilisateur
Sanus
Sanus VisionMount VMPl50A Manuel utilisateur
Sanus
Sanus SAN12 Manuel utilisateur
Sanus
Sanus SASP1 Manuel utilisateur
Sanus
Sanus SECURA QXL12 Manuel utilisateur
Sanus
Sanus Classic MLF20 Manuel utilisateur
