Samsung MWR-WW10JN Manuel utilisateur

Airto WaterHeat Pump

Installation manual

Wired remote controller MWR-WW10JN

࡛Thank you for purchasing this Samsung Product.

࡛Before operating this unit, please read this installation manual carefully and retain it for

future reference.

2English

Contents

Safety Information 3

Wired Remote Controller Installation 4

External Dimensions 4

Wired Remote Controller Installation 5

Tracking Your Indoor Unit from the Wired Remote Controller [See the image A] 8

Individual control with your wired remote controller 9

Group control with yourwired remote controller 10

Controlling 2-remote controller 11

Sharing the temperature of hot water tank sensor 12

Initializing Your Wired Remote Controller Communication 14

Errors displayed on the Wired Remote Controller 14

Installation/Service mode 15

Additional functions of the Wired Remote Controller [See the image B] 15

Installation/Service mode 16

The example of Wired Remote Controller option setting method 21

How to download to microSD Card 21

Self-test mode of wired remote controller 23

Use of self-test mode [See the image D] 23

Safety Information

English

This installation manual explains how to install a Wired Remote Controller connected to the indoor unit of your

Samsung system air conditioner. Please read this manual thoroughly before installing the product. (Please refer to

appropriate installation for any optional product installation.)

Safety Information

WARNING

Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result minor personal injury or property damage.

WARNING

Contact a service centre for installation.

࡛Potential risk of malfunction, water leak, electric

shock and fire.

Install the product on a hard and even place that can

support its weight.

࡛If the place cannot support its weight, the product

may fall down and it may cause product damage.

Install the product with proper power supply.

࡛Potential risk of fire or product damage.

Do not move or reinstall the product on your discretion.

࡛Potential risk of electric shock or fire.

Consult the place of purchase or a contact centre to

disassemble or repair the product.

࡛Potential risk of malfunction, electric shock, or fire.

Check if the installation work is done correctly

according to the installation manual.

࡛Incorrect installation may cause electric shock or

fire.

The electric work must be done by qualified person

according to national wiring regulations and

installation guide.

࡛If an unauthorized person performs the installation,

any resulting defects can cause malfunctions,

electrical shocks, or fire accidents.

When you want to dispose your Wired Remote

Controller, ask the service centre.

CAUTION

Do not install the product where there’s combustible

gas.

࡛Potential risk of fire and explosion.

Do not install the product in areas exposed to oil or

vapor.

࡛Potential risk of product damage or malfunction.

Ensure no water gets into the Wired Remote Controller.

࡛Potential risk of electric shock or fire.

Do not put undue stress on the power cable.

࡛Potential risk of broken cable and fire.

Install the air conditioner away from direct exposure

to sunlight, in room temperature range of 0 °C(32 °F)~

39 °C(102 °F).

࡛Potential risk of electric shock or malfunction.

Do not install the product in areas with frequent use of

acid or alkali spray.

࡛Potential risk of electric shock or product

malfunction.

Do not handle the product with sharp objects.

࡛Potential risk of electric shock or product damage.

Do not connect power cable to a communication

terminal.

࡛Potential risk of fire.

Be cautious not to interfere any other electrical devices

if the product is installed in a place such as hospital.

࡛Potential risk of product malfunction.

Wired Remote Controller Installation

4English

Wired Remote Controller Installation

Wired Remote ControllerInstallation

Wired Remote Controller Installation

External Dimensions

[Unit : mm(inch)]

120.0 (4.72) 19.0(0.75)

120.0 (4.72)

English

Wired Remote ControllerInstallation

Wired Remote Controller Installation

1 Insert the flat-head screwdriver into two square grooves at the bottom of the Wired Remote Controller and rotate

it to lift the front cover for removal from the rear cover.

2 Arrange the power cable and the communication cable so that they fit in the housing along the edges of the rear

cover.

8 cm (3.15 inch) 8 cm (3.15 inch)

Area A

NOTE

࡛When connecting the power and communication cables to the bottom of the Wired Remote Controller, first cut

off the area A.

Wired Remote Controller Installation

6English

Wired Remote Controller Installation

Wired Remote ControllerInstallation

3 Using two or more screws, firmly affix the rear cover of the remote controller to the wall, and then cut off the

grooves of the front covers for communication and power cables, making sure these cables have reasonable

length.

ߣߢ࣑ߢ࢏ߦ

inch) or more

ߣߢ࣑ߢ࢏ߦ

inch) or more

ߧߢ࣑ߤʀ˵࣒

or more

ߣߢ࣑ߢ࢏ߦʀ˵࣒ͱθͱθʪ

Screw hole

Rear cover

࢜9ʪ˙ͱθʪ˙у˝ϩ˵ʪθʪɇθʀͱЭʪθࡥ

ϑʪʀЇθʪɇϩʪɇϑϩߣߢ࣑ߢ࢏ߦʀ˵࣒

space of upper side, left side,

θ˝˵ϩϑʒʪࡥɇʒߧߢ࣑ߤʀ˵࣒

space of bottom side.

࢜ǽͱЇЇϑϩ˙ϩϩ˵ʪ

screws into the

screw holes.

4 Connect the communication cables (F3, F4) to the terminals of the back of the front cover, and then fix the wires

so that they do not get stuck during connection.

V1F1 F2 V2 F3 F4

PCB terminal

Front cover

Wire (not supplied)

࢜Uͱͱϩϩ˝˵ϩʪϩ˵ʪϑʀθʪиϑͱϩ˵ʪťA9

terminal with excessive force.

Indoor

Wired

Remote

Controller

CAUTION

࡛When using an electric screwdriver, tighten the screws to the standard torque because the top of screws may be

worn out if you use a strong torque.

English

Wired Remote ControllerInstallation

5 Reassemble the Wired Remote Controller.

NOTE

࡛Align the controllerwith the upper groove first, and then insert it by

turning it downwards as shown in the figure.

After assembly, check and confirm that no wires are stuck in the gap

between the back and front covers.

6 Remove the front protective film.

CAUTION

࡛ Ǯ˵ʪϑϩɇ˝ɇǮθʪʒŵʪͱϩʪAͱϩθͱʪθɵцЇϑ˝ɇʀɇɵʪͱ˝ʪθϩ˵ɇߣߢ࣑ߥߤ࢏ߪߢ˙ϩ࣒ࡥцͱЇЇϑϩϑϩɇϩ˵ʪ

communication cable and the power cable separately. (Electrical interference can cause the Wired Remote

Controller to malfunction.)

࡛When installing yourWired Remote Controller on the wall, consider the size of the wire hole, and select a wire

with a proper thickness.

࡛Wire that is connectable to Wired Remote Controller PCB.

ࣞIf you install the Wired Remote Controller by reclaiming, install it according to U-terminal cable specification.

ࣞ Ã˙цͱЇϑϩɇϩ˵ʪǮθʪʒŵʪͱϩʪAͱϩθͱʪθɵцЇϑ˝ϩиͱΧʪʀʪϑͱ˙ťǤAиθʪࡥθʪͱЭʪϩ˵ʪߥߢʀ࣑ߣߤʀ˵࣒ͱ˙ϩ˵ʪ

sheath of the cable and install it only with the two pieces of wires. (Recommended specification: AWG20)

Wired Remote Controller Installation

8English

Wired Remote Controller Installation

Wired Remote ControllerInstallation

࡛The following are the specs of the compression ring terminal connected to your Wired Remote Controller PCB.

Stud

ØD

ŵɇ˝ʪͱ˙ťʪθϩϩʪʒǮθʪϑ Rated Size Stud Size Basic Size [mm (inch)]

AWG mm²

(inch²)

mm²

(inch²)

(inch) tØDG E F W L

22~16 0.25~1.65

(0.0003 ~ 0.0025)

1.5

(0.0023)

(0.1181)

0.7

(0.0275)

3.8

(0.1496)

10.0

(0.3937)

4.5

(0.1771)

6.5

(0.2559)

6.0

(0.2362)

21.2

(0.8346)

࢜đɇуЇʒϑϩɇʀʪ˙ͱθʀͱʪʀϩ˝ʀͱЇʀɇϩͱɇʒΧͱиʪθʀɇɵʪࡤߣߢߢ࣑ߥߤߪ˙ϩ࣒

࡛Screws on the PCB terminal must be tightened with less than 6N-cm tightening torque. If the tightening torque is

greater, it may damage the screw thread.

Tracking Your Indoor Unit from the Wired Remote Controller [See the image A]

1 Tracking of yourWired Remote Controller will automatically start when you turn on the power after installation.

2 If you want to perform tracking again after installation, then press the and buttons at the same time for

more than 5 seconds.

࡛The system will reset, and tracking will start again.

3 During tracking, the total number of currently searched indoor units will be displayed.

4 ÃϩɇцϩɇʪɇɵͱЇϩߧЇϩʪϑɇϩϩɇϑϩɇɇϩͱͱθи˵ʪцͱЇθʪࣛϑʪϩϩ˵ʪťͱиʪθđɇϑϩʪθϑʪϩϩ˝࢏

NOTE

࡛The operation displays on the remote controller may differ depending on the selected language.

࡛If you want to perform tracking again after installation, then press the and buttons at the same time for

more than 5 seconds.

English

Wired Remote ControllerInstallation

Individual control with yourwired remote controller

ÃʒЭʒЇɇʀͱϩθͱʪɇϑϩ˵ɇϩцͱЇɇθʪЇϑ˝ͱʪθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱͱʪʒͱͱθЇϩͱθͱʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ

When connecting the Tank integrated Hydro Unit

Outdoor unit

Tank integrated

Hydro Unit

AĮđߣ࣑ߣࡥߤ࣒

Wired Remote

Controller

When connecting the DVM Hydro unit/Hydro unit HT only

Outdoor unit

DVM Hydro unit/

Hydro unit HT

DVM Hydro unit/

Hydro unit HT

DVM Hydro unit/

Hydro unit HT

AĮđߣ࣑ߣࡥߤ࣒

AĮđߤ࣑ߥࡥߦ࣒

AĮđߣ࣑ߣࡥߤ࣒

AĮđߤ࣑ߥࡥߦ࣒ AĮđߤ࣑ߥࡥߦ࣒

Wired Remote

Controller

Wired Remote

Controller

Wired Remote

Controller

CAUTION

࡛ ŵʪ˝ɇθʒʪϑϑͱ˙ϩ˵ʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ˝θͱЇΧɇʒʒθʪϑϑ࣑ŵđAɇʒʒθʪϑϑ࣒ϑʪϩϩ˝ࡥͱцϩ˵ʪUǤđ²цʒθͱЇϩࢩ

²цʒθͱЇϩ²ƟʀͱʪʀϩʪʒϩͱAĮđߤϑʒЭʒЇɇцʀͱϩθͱʪʒ࢏

Wired Remote Controller Installation

10 English

Wired Remote Controller Installation

Wired Remote ControllerInstallation

Group control with yourwired remote controller

θͱЇΧʀͱϩθͱʪɇϑϩ˵ɇϩцͱЇɇθʪЇϑ˝ͱʪиθʪʒθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱϩиͱͱθͱθʪUǤđ²цʒθͱЇϩࢩ²цʒθͱ

unit HTs at the same time.

When connecting the DVM Hydro unit/Hydro unit HT only

1 Ƹϑ˝ͱʪиθʪʒθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱϩ˵θʪʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵϑ

Outdoor unit

AĮđߣ࣑ߣࡥߤ࣒ AĮđߣ࣑ߣࡥߤ࣒

Wired Remote

Controller

AĮđߤ࣑ߥࡥߦ࣒ AĮđߤ࣑ߥࡥߦ࣒

AĮđߣ࣑ߣࡥߤ࣒

DVM Hydro unit/

Hydro unit HT

DVM Hydro unit/

Hydro unit HT

DVM Hydro unit/

Hydro unit HT

2 Ƹϑ˝ͱʪиθʪʒθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵϑʀͱʪʀϩʪʒϩͱʒ˙˙ʪθʪϩͱЇϩʒͱͱθЇϩ

Outdoor unit

Wired Remote

Controller

Outdoor unit

AĮđߣ࣑ߣࡥߤ࣒

AĮđߤ࣑ߥࡥߦ࣒

AĮđߣ࣑ߣࡥߤ࣒

AĮđߤ࣑ߥࡥߦ࣒

DVM Hydro unit/

Hydro unit HT

DVM Hydro unit/

Hydro unit HT

CAUTION

࡛ ŵʪ˝ɇθʒʪϑϑͱ˙ϩ˵ʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ˝θͱЇΧɇʒʒθʪϑϑ࣑ŵđAɇʒʒθʪϑϑ࣒ࡥͱцϩ˵ʪUǤđ²цʒθͱЇϩࢩ²цʒθͱ

Їϩ²ƟϑʀͱʪʀϩʪʒϩͱAĮđߤɇθʪʀͱϩθͱʪʒ˝θͱЇΧ࢏

࡛ ŵʪ˝ɇθʒʪϑϑͱ˙цͱЇθͱЇϩʒͱͱθЇϩϑࡥцͱЇʀɇʀͱϩθͱɇɇуЇͱ˙ߣߨUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵϑɇϑɇ˝θͱЇΧ࢏

Autres manuels pour MWR-WW10JN

Table des matières

Autres manuels Samsung Télécommande

Samsung

Samsung MWR-WW00N Manuel utilisateur

Samsung

Samsung Smart Remote BN68 Series Manuel utilisateur

Samsung

Samsung CU7172 Manuel utilisateur

Samsung

Samsung SolarCell Remote Manuel utilisateur

Samsung

Samsung MWR-WE10 Manuel utilisateur

Samsung

Samsung MWR-WE10N Manuel utilisateur

Samsung

Samsung MR-AH01C Manuel utilisateur

Samsung

Samsung SolarCell Remote Manuel utilisateur

Samsung

Samsung MWR-WE13 Manuel utilisateur

Samsung

Samsung SolarCell Remote Manuel utilisateur

Samsung

Samsung MWR-WW10JN Manuel utilisateur

Samsung

Samsung MR-BH01 Manuel utilisateur

Samsung

Samsung MWR-TH00 Manuel utilisateur

Samsung

Samsung BN68-11568A Manuel utilisateur

Samsung

Samsung BN68-03092A-02 Manuel utilisateur

Samsung

Samsung MWR-WH01 Manuel utilisateur

Samsung

Samsung SolarCell Remote Manuel utilisateur

Samsung

Samsung RMCSPA1EP1 Manuel utilisateur

Samsung

Samsung TM2180E/F Manuel utilisateur

Samsung

Samsung SolarCell Remote Manuel utilisateur

Samsung

Samsung TM2180E/F Manuel utilisateur

Samsung

Samsung MWR-WE10N Manuel utilisateur

Samsung

Samsung TM2180E Manuel utilisateur

Samsung

Samsung MWR-SH00N Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation