Samsung MWR-SH00N Manuel utilisateur

DB68-04148A-00

SOL WRControl_IM_04148A-00_EN.indd 20 2013-09-25 오전 10:29:14

Wired remote controller

MWR-SH00N

Air Conditioner

installation manual

imagine the possibilities

Thank you for purchasing this Samsung product.

This manual is made with 100% recycled paper.

SOL WRControl_IM_04148A-00_EN.indd 21 2013-09-25 오전 10:29:15

ENGLISH-2

Contents

Preparation

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before installation ....................................................................................................... 5

Installation

Wired Remote Controller Installation ..................................................................................... 6

Others

Wired Remote Controller Installation/Service Mode ..................................................................... 15

SOL WRControl_IM_04148A-00_EN.indd 2 2013-09-25 오전 10:29:06

ENGLISH-3

01 PREPARATION

Safety Precautions

This installation manual explains how to install a Wired Remote Controller connected to the indoor unit of your Samsung

system air conditioner. Please read this manual thoroughly before installing the product.

(Please refer to appropriate installation for any optional product installation.)

WARNING Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION Hazards or unsafe practices that may result in minor personal injury or property

damage.

WARNING

Contact a service center for installation.

 Potential risk of malfunction, water leak, electric shock and ﬁre.

Install the product with proper power supply.

 Potential risk of ﬁre or product damage.

Consult the place of purchase or a contact center to disassemble or repair the product.

 Potential risk of malfunction, electric shock, or ﬁre.

The electric work must be done by qualiﬁed person according to national wiring regulations and installation guide.

 If an unauthorized person performs the installation, any resulting defects can cause malfunctions, electrical shocks, or ﬁre

accidents.

Install the product on a hard and even place that can support its weight.

 If the place cannot support its weight, the product may fall down and it may cause product damage.

Do not move or reinstall the product on your discretion.

 Potential risk of electric shock or ﬁre.

Check if the installation work is done correctly according to the installation manual.

 Incorrect installation may cause electric shock or ﬁre.

When you want to dispose your Wired Remote Controller, ask the service center.

SOL WRControl_IM_04148A-00_EN.indd 3 2013-09-25 오전 10:29:06

ENGLISH-4

Safety Precautions

CAUTION

Do not install the product where there’s combustible gas.

 Potential risk of ﬁre and explosion.

Ensure no water gets into the Wired Remote Controller.

 Potential risk of electric shock or ﬁre.

Install the air conditioner away from direct exposure to sunlight, in room temperature range of

0 °C(32 °F) ~ 39 °C(102 °F).

 Potential risk of electric shock or malfunction.

Do not handle the product with sharp objects.

 Potential risk of electric shock or product damage.

Do not install the product in areas exposed to oil or vapor.

 Potential risk of product damage or malfunction.

Do not put undue stress on the power cable.

 Potential risk of broken cable and ﬁre.

Do not install the product in areas with frequent use of acid or alkali spray.

 Potential risk of electric shock or product malfunction

Do not connect power cable to a communication terminal.

 Potential risk of ﬁre.

Be cautious not to interfere any other electrical devices if the product is installed in a place such as hospital.

 Potential risk of product malfunction.

SOL WRControl_IM_04148A-00_EN.indd 4 2013-09-25 오전 10:29:06

ENGLISH-5

01 PREPARATION

Before installation

Optional accessories

Wired Remote

Controller (1) Cable Tie (2) Cable Clamp (2) M4X16 Screw

(2) User Manual (1) Installation

Manual (1) U Terminal (3)

• The Wired Remote Controller should be installed by an installation expert.

• Check and conﬁrm the power is oﬀ before installing your Wired Remote Controller.

• Install the Wired Remote Controller cables in accordance with the electrical wiring rules, and allow it to pass

through the inner area of the wall so that other people can’t reach it.

CAUTION

External Dimensions

[Unit : mm(inch)]

122.0 (4.80)

75.0 (2.95) 16.6

(0.65)

SOL WRControl_IM_04148A-00_EN.indd 5 2013-09-25 오전 10:29:07

ENGLISH-6

Wired Remote Controller Installation

Wired remote controller installation

1. Hold the bottom part of the wired remote controller’s front cover and

push it up to separate it from the back cover.

- Wired remote controller has a slide-open type front cover. (Front cover

can be opened and removed simply by holding the front cover and

pushing it up)

2. Fix the Back cover of the wired remote controller on the wall by using 2

screws.

3. Connect the F3, F4 terminal of the indoor unit PCB to the F3, F4 terminal

of the wire remote controller.

4. Arrange the communication cable according to the installation

environment.

- When wired remote controller is concealed to the wall:

Withdraw the cable through the hole in the middle of the back cover.

- When wired remote controller is mounted on the wall:

Decide the direction of the cables to withdraw and remove the thin

part of plastic (circled part in the illustration) in front and back cover.

- When withdrawing the cable through the top of the wired remote

controller using a cable molding:

Cut at least 1 cm of cable molding on the side that is closed to the

wired remote controller, so that cable molding does not interfere with

opening/closing of the front cover.

5. Re-assemble the wired remote controller.

SOL WRControl_IM_04148A-00_EN.indd 6 2013-09-25 오전 10:29:07

ENGLISH-7

02 INSTALLATION

• When installing a Wired Remote Controller by using a cable longer than 10 m(32.80 ft), you must install the

communication cable and the AC power cable separately. (Electrical interference can cause your Wired Remote

Controller to malfunction.)

• When installing your Wired Remote Controller on the wall, consider the size of the wire hole, and select a wire

with a proper thickness.

• Wire that is connectable to Wired Remote Controller PCB.

- If you install the Wired Remote Controller by reclaiming, install it according to U-terminal cable speciﬁcation.

- If you install the Wired Remote Controller by using two pieces of PVC wire, remove the 30 cm(12 inch) of the

sheath of the cable and install it only with the two pieces of wires. (Recommended speciﬁcation: AWG21)

• The following are the specs of the compression ring terminal connected to yourWired Remote Controller PCB.

• ScrewsonthePCBterminalmustbetightenedwithlessthan6N•cmtighteningtorque.Ifthetighteningtorque

is greater, it may damage the screw thread.

 Maximum distance for connecting communication and power cable: 100 m(3.280 ft)

CAUTION

Stud D

Range of Permitted

Wires

Rated

Size Stud Size Basic Size [mm (inch)]

AWG mm2

(inch2)

mm2

(inch2)

(inch) tøD G E F W L

22~16

0.25~1.65

(0.0003 ~

0.0025)

1.5

(0.0023) 3 (0.1181) 0.7

(0.0275)

3.8

(0.1496)

10.0

(0.3937)

4.5

(0.1771)

6.5

(0.2559)

6.0

(0.2362)

21.2

(0.8346)

SOL WRControl_IM_04148A-00_EN.indd 7 2013-09-25 오전 10:29:08

ENGLISH-8

Wired Remote Controller Installation

Tracking Your Indoor Unit from the Wired Remote Controller

Displays the total number of units searched

Indicates tracking in

progress

1. Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation.

2. If you want to perform tracking again after installation, then press the []and [Set] buttons at the same time for more

than ﬁve seconds.

- The system will reset, and tracking will start again.

3. During tracking, the total number of currently searched indoor units will be displayed.

4. It may take about 5 minutes at initial installation or when you re-set the Master setting.

• If you want to perform tracking again after installation, then press the [ ] and [Set] buttons at the same time

for more than ﬁve seconds.

CAUTION

SOL WRControl_IM_04148A-00_EN.indd 8 2013-09-25 오전 10:29:08

ENGLISH-9

02 INSTALLATION

Individual Control with Your Wired Remote Controller

Individual control means that you are using one remote controller to control one indoor unit.

Outdoor Unit

Indoor Unit

COM1(F1, F2)

COM2(F3, F4)

COM1(F1, F2)

COM2(F3, F4) COM2(F3, F4)

Wired Remote

Controller

Wired Remote

Controller

Wired Remote

Controller

Indoor Unit Indoor Unit

• Regardless of the indoor group address (RMC address) only the indoor unit connected to COM2 is individually

controlled.

CAUTION

SOL WRControl_IM_04148A-00_EN.indd 9 2013-09-25 오전 10:29:08

Autres manuels pour MWR-SH00N

Table des matières

Autres manuels Samsung Télécommande

Samsung

Samsung VG-TM2360E Manuel utilisateur

Samsung

Samsung SRF1 Guide d'installation

Samsung

Samsung SolarCell Remote Manuel utilisateur

Samsung

Samsung Smart Remote BN68 Series Manuel utilisateur

Samsung

Samsung MWR-WE10 Manuel utilisateur

Samsung

Samsung MWR-TH00 Manuel utilisateur

Samsung

Samsung bn59-01178w Manuel utilisateur

Samsung

Samsung MR-BH01 Manuel utilisateur

Samsung

Samsung CS-21A11MH Manuel utilisateur

Samsung

Samsung TM2180E/F Manuel utilisateur

Samsung

Samsung MWR-SH00 Manuel utilisateur

Samsung

Samsung MWR-VH01 Manuel utilisateur

Samsung

Samsung TM2180E Manuel utilisateur

Samsung

Samsung MWR-WE10N Manuel utilisateur

Samsung

Samsung AR-KH04E Manuel utilisateur

Samsung

Samsung MWR-BS00 Manuel utilisateur

Samsung

Samsung MWR-WH01 Manuel utilisateur

Samsung

Samsung MWR-WW00N Manuel utilisateur

Samsung

Samsung RMC30C2 Manuel utilisateur

Samsung

Samsung MWR-WE00 Manuel utilisateur

Samsung

Samsung ERV Mode d’emploi

Samsung

Samsung MWR-WE10 Manuel utilisateur

Samsung

Samsung AR-KH03E Manuel utilisateur

Samsung

Samsung SolarCell Remote Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation