Ruijie Reyee RG-NBS6002 Manuel d'installation et d'exploitation

Ruijie Reyee

RG-NBS6002 Switch

Hardware Installation and Reference Guide

DocumentVersion:V1.0

Date: 2023.02.09

All rights arereservedin this documentand this statement.

Anyreproduction,excerption,backup,modification,transmission,translationorcommercialuseofthisdocument

oranyportion ofthis document,inanyform orbyanymeans,withoutthepriorwrittenconsentofRuijieNetworks

is prohibited.

Trademarks including , are ownedby RuijieNetworks.

Allothertrademarks orregisteredtrademarks mentionedinthis document are ownedbytheirrespectiveowners.

Disclaimer

The products,services,orfeatures youpurchasearesubjectto commercialcontracts and terms,andsomeor

all ofthe products,services, orfeatures describedinthis documentmaynotbe available foryou topurchase or

use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or

warranties with respecttothe contentof this document.

Thecontentofthis documentwillbeupdatedfrom timetotimeduetoproductversionupgrades orotherreasons,

RuijieNetworks reserves therightto modifythe contentof the documentwithoutanynoticeor prompt.

This manualis designed merelyas a userguide.RuijieNetworks has tried its besttoensuretheaccuracyand

reliabilityofthe content whencompiling this manual, butitdoes not guaranteethatthe content ofthe manual is

completelyfreeoferrors oromissions,and all theinformationin this manualdoes not constituteanyexplicitor

implicitwarranties.

Preface

IntendedAudience

This documentis intendedfor:

Networkengineers

Technicalsupportand servicing engineers

Networkadministrators

Technical Support

The officialwebsiteof Ruijie Reyee:https://www.ruijienetworks.com/products/reyee

Conventions

1. Signs

This documentalso uses signs toindicatesomeimportantpoints during theoperation.Themeanings ofthese

signs areas follows:

Caution

An alert that calls attentionto safety instruction thatif not understood orfollowedcanresultin personalinjury.

Warning

An alert that calls attention to importantrules and information thatif not understoodorfollowedcanresultin

data loss orequipmentdamage.

Note

An alert that calls attentionto essentialinformation thatifnot understoodorfollowed can resultin function

failureor performancedegradation.

Instruction

An alert that contains additionalorsupplementaryinformation thatifnot understoodorfollowed willnotlead to

serious consequences.

Specification

An alert that contains adescriptionofproductor version support.

2. Note

This manual provides installation steps, troubleshooting, technical specifications, and usage guidelines for

cables and connectors.Itis intendedforusers who wanttounderstandthe above andhave extensive experience

in networkdeploymentandmanagement,andassumethatusers arefamiliar withrelatedterms andconcepts.

Hardware Installation and Reference Guide Product Overview

1 Product Overview

RG-NBS6002 switchis 1U swappable box-typenetwork switchindependentlydevelopedbyRuijie Networks. It

provides two line card slots for four types of line cards and two power supply module slots for 1+1 power

redundancy.The followingtabledescribescomponentsofanRG-NBS6002switch.

Item

Model

Remarks

Chassis(independently

purchasedanddelivered)

RG-NBS6002

The chassiscontains thebackplane.

Service module (independently

purchasedanddelivered)

M6000-24GT2XS

One or two servicemodules canbe configured.

M6000-24SFP2XS

M6000-16GT8SFP2XS

M6000-16SFP8GT2XS

Powersupplymodule

(independentlypurchased and

delivered)

RG-PA150I-FS

1+1 redundancyis supported.

Hardware Installation and Reference Guide Product Overview

1.1 RG-NBS6002Switch

1.1.1 Package Contents

Table 1-1 PackageContents

Item

Quantity

Chassis

Powersupplymodule fillerpanel

Service module fillerpanel

M4 x 10 mm screw

M4 x 8 mm screw

Foot pad

Mounting bracket

Yellow/greenground cable

Warranty Card

UserManual

Product managementsoftware ofRuijieNetworks

Instruction

●The preceding tablelists itemsdeliveredinnormalcases.Theactuallydelivereditems mayvary with the

contract. Carefullycheck your goods againstthe package contents orcontract. Contact the sellerif you

have any questions orfind anyerrors.

1.1.2 Product Appearance

The hardware ofanRG-NBS6002switch consists ofthechassis,power supplysystem,system modules,and

heat dissipation system.

Power supply system: Provides two power supply module slots and supports 1+1 power redundancy. It is

recommendedtoconfigure powerredundancy.

System modules:Provides two servicemoduleslots.Allservicemodules can beconfiguredin eitherofthe two

slots.You can selectdifferent servicemodules based onactualapplicationrequirements.

Figure 1-1 RG-NBS6002 Switch Appearance (Service Module Combination of M6000-24GT2XS and

M6000-24SFP2XS)

Front View

Hardware Installation and Reference Guide Product Overview

RearView

1.1.3 Ports - Front Panel

Figure 1-2shows thefrontpanel ofanRG-NBS6002 switch.For thedetailedmeanings ofnumbers 1 to7,see

the followingtable.

Figure 1-2 Front Panel of an RG-NBS6002 Series Switch (Service Module Combination of M6000-

16GT8SFP2XS and M6000-16SFP8GT2XS)

Hardware Installation and Reference Guide Product Overview

Item

Description

Linecard status

indicator

Linecard status indicator.Thestatuses areas follows:

●

Solidgreen:The service moduleworks properly.

●

Blinkinggreen:The service moduleis startingup.

●

Blinkingyellow:Hot swappingorconfiguration conflictoccurs.

Off: The system is notpoweredon or the system is receivingpowerbut is not

functioningproperly.

RJ-45copper

port

10/100/1000Base-TadaptiveEthernetport that supports auto-negotiation.The

copperport uses an RJ45connector.

RJ-45copper

port indicator

Status indicatorof a 10/100/1000Base-Tadaptive Ethernetport. The statuses

are as follows:

●

Solidgreen:The port has made asuccessful1000 Mbps link.

●

Blinkinggreen:The port is sending orreceiving traffic at 1000Mpbs.

Off: No linkis detectedfor the port.

SFP port

SFP port. For details aboutapplicable transceivermodules,see

TransceiverModules.

SFP port

indicator

SFP port indicator. The statuses areas follows:

●

Solidgreen:The port has madeasuccessful link.

●

Blinkinggreen:The port is sending orreceiving traffic.

Off: No linkis detected for the port.

SFP+ port

SFP+ port. For details aboutapplicable transceivermodules,see

TransceiverModules

SFP+ port

indicator

SFP+ port indicator.The statuses areas follows:

●

Solidgreen:The port has madeasuccessful link.

●

Blinkinggreen:The port is sending orreceiving traffic.

Off: No linkis detectedfor the port.

Nameplate

Nameplateonthe bottom of the device

Warning

●Before handlingortransportingthechassis ofaRG-NBS6002switch,removethe servicemodules and

powersupplymodules from thechassis.Pleasedonothandleortransportthe chassisofanRG-

NBS6002 switchwiththe servicemodules or powersupplymodulesinstalled.

1.1.4 Ports - Rear Panel

Figure 1-3shows therear panelof anRG-NBS6002 switch.For detailedmeanings ofnumbers 1to 7,seethe

followingtable.

Hardware Installation and Reference Guide Product Overview

Figure 1-3 Rear Panel of an RG-NBS6002 Switch

Item

Description

Groundingpost

Used to fastenthe groundcable.

MGMT port

10/100/1000Base-Tadaptive Ethernetport. The port uses anRJ-45

connector. The managementportis used for configuration andsoftware

upgrade.

System indicator

(SYS)

●

Solidgreen:The system is initialized.

●

Blinkinggreen(rapidly):The system is startingup.

●

Blinkingyellow:The temperaturereaches thewarningvalueor you are

unableto read the temperature.Aservice moduleis insertedinhot

swappingmode.

●

Blinkingred:Adevice fault occurs, whichcauses system ormodule failure

or causes devicedamageifthe system continues to run.

The powersupplymoduleis faultyor inserted withoutacable.

Off: The switchis not powered on.

Managementport

indicator

10/100/1000Base-Tadaptive Ethernetport status indicator.The statuses are

as follows:

●

Solidgreen:The port has madeasuccessful 1000Mbps link.

●

Blinkinggreen:The port is sending orreceiving traffic at 1000Mpbs.

Off: No linkis detectedfor the port.

Resetbutton

After the resetbuttonis pressed,thesystem is resetand restarts basedonthe

originalsoftwareversion(Note).

Fan module

Three fan modulesareused forheat dissipation.

Powersupply

module

Two powersupplymodule slots PWR1 andPWR2 areavailable.

Insertpowersupplymodules andthenconnectAC powercords.

1+1 powerredundancyis supported.

Powersupply

module indicator

Powersupplymodule status indicator(PWR1 andPWR2). The statuses are

as follows:

●

Solidgreen:Power supplyis normal.

●

Solidred: Powersupplyis abnormal.

Hardware Installation and Reference Guide Product Overview

Off: The system is not powered on.

Note

●Resetbutton:Whenyou press andholdthe resetbutton for less than2 seconds,all modulesarereset.

When you press andholdthe resetbuttonfor morethan5 seconds,all modulesarereset,the initial

passwordis restored,thesupervisormoduleis restoredto factory settings,and theconfigurationbackup

file is saved.If you login to the web-basedmanagementsystem aftera restart,you can selectDelete

Backup or Restore Backup (the password is the defaultpassword).If you do not login, factory settings

are usedforthe supervisormodule.Whenyou press andholdtheresetbuttonfor 2s to 5s, no operation

is performed.Thepreceding events are executed after you releasetheresetbutton.

1.1.5 Technical Specifications

Table 1-2 Technical Specifications of an RG-NBS6002 Switch

Product

Model

RG-NBS6002

CPU

EmbeddedCPU,single-core processor,and clockspeed of 1 GHz

Flash

Memory

256MB

SDRAM

DDRIII 1 GB

Module Slot

Two service moduleslots

Service

Module

M6000-24GT2XS

M6000-24SFP2XS

M6000-16GT8SFP2XS

M6000-16SFP8GT2XS

Hot Swapping

Powersupplymodules supporthotswapping,whileservicemodules donot.

PowerSupply

Module

RG-PA150I-FS: 100V to 240V; Power:150 W

Power Supply

Redundancy

Supported(Powersupplymodules ofthe samemodelmustbeused.)

Fan Module

Fixed fans

Certificate

Altitude

At 3000m (3.11 miles)above sealevel,the maximum operating temperatureis 50°C

(122°F). Every timethe altitudeincreases by220 m (721.78 ft.), the maximum

operatingtemperatureis decreaseby1°C (1.8°F).

Operating altitude:up to 5000 m above sealevel (3.11 miles)

Storagealtitude: upto 5000m above sealevel (3.11 miles)

Hardware Installation and Reference Guide Product Overview

Operating

Temperature

0°C to 50°C (32°F to 122°F)

Storage

Temperature

–40°Cto 70°C (-40°F to 158°F)

Operating

Humidity

10%to 90%RH (non-condensing)

MTBF

> 200,000hours

Noise

In an ambienttemperatureof25°C(77°F),the device noiseis 60 dB or less.

Weight

(Without

Service

Modules)

5.4 kg (11.90 lbs.)

Dimensions

(Chassis) (H x

W x D)

44 mm x442 mm x460 mm (1.73in. x 17.40 in. x 18.11 in.), 1U

Instruction

●The weightin the preceding tableindicates onlythe weightof the emptychassis.The entiredevice weight

is calculated based ondifferentservicemodules.

Caution

●Operation of this equipmentina residential environmentcouldcause radio interference.

●This equipmentis notsuitableforuse inlocations wherechildrenare likelyto be present.

1.2 RG-PA150I-FSPower SupplyModule

Powersupplyfor anRG-NBS6002switch:

AC input: The RG-PA150I-FS powersupplymodule is supported.

Note

●RG-NBS6002 switchsupports 1+1 redundancyof the powersupplymodules.Toimprovethe stabilityand

reliabilityof the entire system,itis recommended to configurepowerredundancy.

Table des matières

Autres manuels Ruijie Changer

Ruijie

Ruijie RG-S7600 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-NBS5200 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6580-48CQ8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-IS2700-P Series Manuel d'installation

Ruijie

Ruijie RG-S5300-E Series Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-NBS7003 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S5000-24GT4MS-E Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-ES126S-LP V2 Manuel utilisateur

Ruijie

Ruijie RGOS 11.X Manuel utilisateur

Ruijie

Ruijie Reyee RG-ES126S-P V2 Manuel utilisateur

Ruijie

Ruijie XS-S1960-10GT2SFP-P-H Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6580-48CQ8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie S8600E Series Manuel

Ruijie

Ruijie S5750 Series Manuel utilisateur

Ruijie

Ruijie RG-MF2920U Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES200 Series Manuel utilisateur

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES126S-LP Manuel utilisateur

Ruijie

Ruijie RG-S6510-48VS8CQ Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS88-08 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-PF2920U-4GT1MS-P Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S2928G-E Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS85 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6510-32CQ Manuel d'installation et d'exploitation

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur