Rose electronics CrystalView EX5 Manuel utilisateur

CrystalView EX5

CATx

Extender

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

INSTALLATION AND

OPERATIONS

MANUAL

Limited Warranty

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission

of Rose Electronics.

Rose Electronics Part # MAN-CRVEXT5

Printed In the United States of America – Revision

Rose Electronics warrants the CrystalView EX5 to be in good working order for one year from the

date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good

working order at any time during this one-year warranty period, Rose Electronics will, at its option,

repair or replace the Unit as set forth below. Repair parts and replacement units will be either

reconditioned or new. All replaced parts become the property of Rose Electronics. This limited

warranty does not include service to repair damage to the Unit resulting from accident, disaster,

abuse, or unauthorized modification of the Unit, including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period

to Rose Electronics or an authorized repair center providing a proof of purchase date. If this Unit is

delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in transit, to

prepay shipping charges to the warranty service location, and to use the original shipping container or

its equivalent. You must call for a return authorization number first. Under no circumstances will a unit

be accepted without a return authorization number. Contact an authorized repair center or Rose

Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO

WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME

STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL

ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST

PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE

ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY

TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE

OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft

Windows are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this

manual are acknowledged to be the property of the trademark owner.

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY

FCC Radio Frequency Interference

This device complies with FCC Part 15 Subpart B. of the FCC rules;

operation is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including

interference that may cause undesired operation.

CE Statement

This product meets European Standard EMC EN-55022 Class A,

EN 61000, and EN 55024

IC Statement

This Class A digital apparatus complies with Canadian ICES-003.

Table of Contents

Contents Page #

Disclaimer...................................................................................................... 1

System Introduction....................................................................................... 1

Features......................................................................................................... 2

Package Contents ......................................................................................... 2

Additional Installation Items........................................................................... 3

Rose Electronics web site.............................................................................. 3

Product Registration...................................................................................... 3

System Overview........................................................................................... 3

Models ........................................................................................................... 4

Transmitter - Front Panel........................................................................... 5

Transmitter - Rear panel Connectors......................................................... 5

Receiver - Front Panel............................................................................... 6

Receiver - Rear Panel................................................................................ 6

System Installation......................................................................................... 7

Transmitter installation............................................................................... 7

Receiver installation................................................................................... 8

Installation Verification............................................................................... 8

Connecting USB Devices........................................................................... 9

System Operation.......................................................................................... 9

System Troubleshooting.............................................................................. 10

Product Safety............................................................................................. 12

Maintenance and Repair.............................................................................. 13

Technical Support........................................................................................ 13

Figures Page #

Figure 1. Models............................................................................................ 4

Figure 2. Typical Installation.......................................................................... 7

Tables Page #

Table 1. Transmitter Indicators/Connectors .................................................. 5

Table 2. Receiver Indicators / Connectors .................................................... 6

Appendices Page #

Appendix A – General Specifications.......................................................... 14

INTRODUCTION

CrystalView EX5 Installation and Operations Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the

manufacturer assumes no responsibility for errors or omissions. Neither

does the manufacturer assume any liability for damages resulting from the

use of the information contained herein. The manufacturer reserves the

right to change the specifications, functions, or circuitry of the product

without notice.

The manufacturer cannot accept liability for damages due to misuse of the

product or other circumstances outside the manufacturer’s control. The

manufacturer will not be responsible for any loss, damage, or injury arising

directly or indirectly from the use of this product.

System Introduction

Thank you for choosing the CrystalView EX5 extender from Rose

Electronics for your remote accessing needs. The CrystalView EX5 system

consists of a Transmitter unit and a Receiver unit. The Transmitter unit

connects to your computer’s DVI-D and USB Type A connectors using the

provided DVI and USB cables. The Receiver unit connects to your

workstation. The Transmitter and Receiver units are connected together

with industry standard CAT5e or better cable. This provides access to your

computer from up to 330 feet (100m) away.

The CrystalView EX5 extender complies with USB 1.1 and USB 2.0

specifications and supports USB 1.1 and low bandwidth USB 2.0

devices. It is ideal for use in industrial control areas, digital signage,

connecting cameras for security systems, USB device printing, scanning

and storage.

If additional USB devices are needed, you can add up to 4 USB hubs to

the three port Receiver model and connect up to 13 USB devices.

The CrystalView EX5 supports all major operating systems including

Windows®, MAC®, and Linux®

USB printers, scanners, web cameras, USB hard drives, flash drives, MP3

players and more can easily be connected to the Receiver unit.

Since there are a number of factors that effect the operation of the

CrystalView EX5, not all devices are compatible with this product.

2 CrystalView EX5 Installation and Operations Manual

Features



Supports CAT5e cable distances up to 330 feet (100m)



Supports uncompressed HD DVI video with resolutions up to

1920 x 1200

(Resolution does not degrade over CAT5e distance)



USB Host support – EHCI (USB 2.0) and OHCI/UHCI (USB 1.1)



Supports USB 2.0 (high-speed at reduced bandwidth),

USB 2.0 and 1.1 (Full-speed), and

USB 2.0 and 1.1 (Low-speed)



3-USB ports available on the Receiver unit



Standard USB hubs can be used to increase the maximum number of

connected USB devices to 13 and 4 USB hubs.



Up to 500 mA of power is available at each USB port on the Receiver

for powering high-power USB devices



Plug-and-Play installation, no configuration or set-up needed.



Installation consists of:

1. Connecting the Receiver to your DVI monitor, USB keyboard and

mouse, headphone, microphone and USB device(s)

2. Connect the Transmitter to your computer’s DVI video port and

USB port.

3. Connect the Transmitter to the Receiver using standard CAT5e*

cable

4. Apply power and the installation is complete.

The Transmitter unit requires a +5VDC power adapter (included).

The Receiver unit requires a +5VDC power adapter (included).

* CAT5e or better cable, Solid core CAT6 STP cable is recommended

Package Contents



Transmitter unit



Receiver unit



5V, 3A power adapter (Transmitter)



5V, 3A power adapter (Receiver)



USB Type A to Type B cable (6 ft)



DVI cable (male to male- 5 ft)



Product Manual

CrystalView EX5 Installation and Operations Manual 3

Additional Installation Items

Computer with DVI-D/DVI-I output

USB 1.1 or 2.0 host computer

1 -CAT5e cable (Transmitter to Receiver – Point-To-Point)

USB 1.1 or 2.0 compatible devices

Rose Electronics web site

Visit our web site at www.rose.com for additional information on the

CrystalView EX5 and other products offered by Rose Electronics that are

designed for data center applications, classroom environments, digital

wall/signage displays, industrial / military systems, and many other access

and switching applications.

Product Registration

Take advantage of the following when you register your Rose Electronics

products online at www.rose.com/htm/online-registrationform.htm.

Rose Electronics standard warranty Plus . . . .

Free Lifetime Firmware Updates

Free Lifetime Technical Support

30 day Money Back Guarantee

Priority “First-In-Line” Status for Technical Support

System Overview

The CrystalView EX5 is a very versatile and flexible system that can be

easily and quickly installed. You can position your computer anywhere

within 330 feet of the Receiver unit and access and control it as if you were

directly connected to the computer. You can control and use a USB

keyboard, USB mouse, webcam, flash drive, USB speakers, microphone

and other compatible USB devices.

The versatility of the CrystalView EX5 makes it ideal for security, medical,

signage, and industrial applications where remote access is required.

The Receiver unit has 3 USB Type A connectors. These are usually

connected to a USB mouse, USB keyboard, and a USB HUB. The

CrystalView EX5 supports up to 13 USB devices and 4 HUB levels.

MODELS

4 CrystalView EX5 Installation and Operations Manual

Models

Transmitter – Front View

Indicators

Power

Link

USB

Video

Transmitter – Rear View

Connectors

DVI-D In

Config

USB Type B

Link

Power (+5V / 3A)

Receiver – Front View

Indicators

Power

Link

USB

Video

Receiver – Rear View

Connectors

DVI-D Out

Headphone Out

Microphone In

Config

Link

Power (+5V / 3A)

Figure 1. Models

CrystalView EX5 Installation and Operations Manual 5

Transmitter - Front Panel

Indicator

Description

Power

(Green LED)

On = Ready / Off = No power /

Link

(Green LED)

On = Valid Link between Transmitter and Receiver

Off = No Link

USB

(Green LED)

On = Properly enumerated on host computer

Off = No Link

Blinking = host is in suspend mode

Video

(Green LED)

On = Valid HDCP activity between the Transmitter

and host computer

Off = No Video activity

Blinking = Normal video is being transmitted

between the Transmitter and Receiver

Transmitter - Rear panel Connectors

Connector

Description

DVI-D In

DVI-D Video Input from Host computer (Supplied)

Config

Reserved for company use only

USB Type B

USB input from Host computer (Supplied)

Link (RJ45)

Connection for a CAT5e or better cable to the

Receiver unit

Power

+5V, 3A power adapter (Supplied)

Table 1. Transmitter Indicators/Connectors

6 CrystalView EX5 Installation and Operations Manual

Receiver - Front Panel

Indicator

Description

Power

(Green LED)

On = Ready / Off = No Link

Link

(Green LED)

On = Valid Link between Transmitter and Receiver

Off = No Link

USB

(Green LED)

On = Properly enumerated on host computer

Off = No Link

Blinking = host is in suspend mode

Video

(Green LED)

On = Valid HDCP activity between the Transmitter

and host computer

Off = No Video activity

Blinking = Normal video is being transmitted

between the Transmitter and Receiver

Receiver - Rear Panel

Connector

Description

DVI-D Out

DVI-D Video connector to the monitor

Config

Reserved for company use only

USB Type A

Connection (3) for remote USB devices

Link (RJ45)

Connection for a CAT5e or better cable to the

Transmitter unit

Power

+5V, 3A power adapter (Supplied)

Table 2. Receiver Indicators / Connectors

Autres manuels pour CrystalView EX5

Table des matières

Autres manuels Rose electronics Extenseur

Rose electronics

Rose electronics Cybernetech CLK-2U2TP-100M Manuel utilisateur

Rose electronics

Rose electronics CrystalView Plus Manuel utilisateur

Rose electronics

Rose electronics Orion XTender OT2-SLDTXUD1D Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manuel utilisateur

Rose electronics

Rose electronics CrystalView CrystalView TWISTED PAIR KVM... Manuel utilisateur

Rose electronics

Rose electronics CrystalLink USB Fiber Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI EX Manuel utilisateur

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manuel utilisateur

Rose electronics

Rose electronics CrystalView HDT Manuel utilisateur

Rose electronics

Rose electronics CrystalView USB2 Manuel utilisateur

Rose electronics

Rose electronics CRK-2DTPPDVI Manuel utilisateur

Rose electronics

Rose electronics CLK-4U2TP-100M Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI EX Manuel utilisateur

Rose electronics

Rose electronics CrystalView Micro LT Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI Mini Manuel utilisateur

Rose electronics

Rose electronics CrystalView Exact Manuel utilisateur

Rose electronics

Rose electronics XtendVue Manuel utilisateur

Rose electronics

Rose electronics ViewLink Coax Manuel utilisateur

Rose electronics

Rose electronics CrystalView CAT5 Rack CRV-12SLP Manuel utilisateur

Rose electronics

Rose electronics ViewLink CATx Manuel utilisateur

Rose electronics

Rose electronics CrystalView Plus Manuel utilisateur

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Manuel du propriétaire

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur