Rose electronics CrystalView Plus Manuel utilisateur

Using the CD

Insert the provided CD and

the Product Document

selection window will

automatically display.

Select the product and the

Manual, DataSheet, and

QuickStart document

window will display. Select

the document to display or

print. Documents are in

PDF format.

The CrystalView Plus is available in several models; single, dual, and quad

video models and the PC-Serial/Audio model. The local access version allows

an additional KVM station to be connected to the Local Unit.

The CrystalView Plus system consists of two Units, a Local Unit and a Remote

Unit. The Local Unit connects to your CPU and one or two video sources or a

Rose switch. The Remote Unit connects to a keyboard, one to four video

monitors and a mouse. The Local and Remote Units are connected together

with industry standard CAT-5, CAT-5e, or CAT-6 shielded or unshielded, solid

core twisted-pair cable terminated with RJ45 connectors. All models can extend

the distance from the CPU up to 1,000 feet. CAT-x cable

Serial/Audio models can connect a pair of

stereo speakers, a microphone, and a

supported serial device. Serial and audio

support is on the remote unit port #1 only.

The video from each connected computer can be adjusted using simple

keyboard commands shown in the keyboard command table.

Adjusting the video consists of:

1. Enter the Command Mode

2. Select the video channel to adjust

3. Display the test card at http://www.rose.com/htm/crvtestcard.htm or

create a straight line graphic that is equally divided into three color

parts, RED, GREEN, and BLUE

4. Adjust the RED, GREEN, and BLUE delay to align the three colors

5. Observe the “H” in the lower left corner of the test card or display some

text on a white background.

6. Adjust the LF and HF Equalization to eliminate smearing or bright

streaks

7. Save the settings

8. On the dual and quad models, select the next video channel to adjust

and perform steps 3 – 7 on this and all other channels.

Keyboard commands

Note: Use only the numeric keys above the keyboard to initiate the keyboard

commands from the remote unit.

Do not use the numeric keypad.

Command

Key Sequence

Command mode – [L-Ctrl]

+ [L-Shift] + [F10]

Entering the command

mode sends the remote

units keyboard instructions

to the CrystalView Plus

instead of the connected

computer. In the

command mode, the

yellow LED on the remote

units RJ45 connector for

channel 1 will light

indicating that the unit is in

the command mode. The

keyboard status LEDs

(Num lock, Caps Lock,

and Scroll Lock) will flash

indicating which channel is

selected. The Command

mode automatically times

out after 30 seconds of

inactivity, saves all

settings, and returns the

keyboard to normal

functions.

Command Mode

[L-Ctrl] + [L-Shift] + [F10]

Exit Command Mode and save

Exit Command Mode without saving

[ESC]

[L-Shift] + [ESC]

Select Channel 1, 2, 3, or 4

[1] / [2] / [3] / [4]

Select Channel 0

[0] (select all channels)

Reset EQ & Delay values

[L-Ctrl] + [Home]

Next Assisted EQ setting

[L-Ctrl] + [PgUp]

Previous Assisted EQ setting

[L-Ctrl] + [PgDn]

Increase RED delay

[R] + [R-arrow]

Decrease RED delay

[R] + [L-arrow]

Increase Green delay

[G] +[R-arrow]

Decrease Green delay

[G] + [L-arrow]

Increase Blue delay

[B] + [R-arrow]

Decrease Blue delay

[B] + [L-arrow]

Toggle RED delay

[L-Ctrl] + [R]

Toggle GREEN delay

[L-Ctrl] + [G]

Toggle BLUE delay

[L-Ctrl] + [B]

Reset EQ values

[L-Ctrl] + [End]

Increase LF EQ (Course)

[L] + [Up Arrow]

Decrease LF EQ (Course)

[L] + [Dn Arrow]

Increase LF EQ (Fine)

[L] + [R-Arrow]

Decrease LF EQ (Fine)

[L] + [L-Arrow]

Increase HF EQ (Course)

[H] + [Up Arrow]

Decrease HF EQ (Course)

[H] + [Dn Arrow]

Increase HF EQ (Fine)

[H] + [R-Arrow]

Decrease HF EQ (Fine)

[H] + [L-Arrow]

Reset keyboard and mouse

[F1]

Send NULL mouse byte

[F3]

Reset to factory defaults

[L-Ctrl] + [F9]

Toggle Unit Private Mode

[Scroll Lock]

Keyboard Commands

NOTE: All keyboard commands are initiated from the Remote unit.

Before any keyboard command can be issued, the unit must be in the

command mode and a channel selected. Refer to the installation and

operations manual for a complete description of all keyboard

commands and their usage.

Autres manuels pour CrystalView Plus

Autres manuels Rose electronics Extenseur

Rose electronics

Rose electronics VideoSplitter CAT5 Manuel utilisateur

Rose electronics

Rose electronics Cybernetech CLK-2U2TP-100M Manuel utilisateur

Rose electronics

Rose electronics Xcion DVI/VGA over CATx Manuel utilisateur

Rose electronics

Rose electronics CrystalView EX5 Manuel utilisateur

Rose electronics

Rose electronics CLK-4U2FM-500M Manuel utilisateur

Rose electronics

Rose electronics CrystalView Extreme Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI EX Manuel utilisateur

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manuel utilisateur

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Manuel du propriétaire

Rose electronics

Rose electronics CrystalLink USB-3-2-1 Fiber Manuel utilisateur

Rose electronics

Rose electronics AUTO EQUALIZATION Manuel utilisateur

Rose electronics

Rose electronics CrystalView CAT5 Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI EX Manuel utilisateur

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI CAT Series Manuel utilisateur

Rose electronics

Rose electronics Xcion XCK-2DTXUD1D Manuel utilisateur

Rose electronics

Rose electronics CrystalView Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI CATx CRK-2DTXPD1D Manuel utilisateur

Rose electronics

Rose electronics PS/2 Manuel utilisateur

Rose electronics

Rose electronics CrystalView Plus Manuel utilisateur

Rose electronics

Rose electronics XtendVue Manuel utilisateur

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Manuel utilisateur

Rose electronics

Rose electronics CRK-1USB Manuel utilisateur

Rose electronics

Rose electronics CRK-1P1V Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur