Rose electronics CrystalView DVI EX Manuel utilisateur

CrystalView DVI EX

KVM Extender, DVI, USB 2.0, Audio, CAT5

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

INSTALLATION AND

OPERATIONS

MANUAL

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission

of Rose Electronics.

Rose Electronics Part # MAN-CRVDVIEX

Printed In the United States of America – Revision

Rose Electronics warrants the CrystalView DVI EX to be in good working order for one year

from the date of purchase from Rose Electronics or an authorized dealer. Should this product

fail to be in good working order at any time during this one-year warranty period, Rose

Electronics will, at its option, repair or replace the Unit as set forth below. Repair parts and

replacement units will be either reconditioned or new. All replaced parts become the property of

Rose Electronics. This limited warranty does not include service to repair damage to the Unit

resulting from accident, disaster, abuse, or unauthorized modification of the Unit, including

static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty

period to Rose Electronics or an authorized repair center providing a proof of purchase date. If

this Unit is delivered by mail, you agree to insure the Unit or assume the risk of loss or damage

in transit, to prepay shipping charges to the warranty service location, and to use the original

shipping container or its equivalent. You must call for a return authorization number first. Under

no circumstances will a unit be accepted without a return authorization number. Contact an

authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF

PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY

AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN

IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR

SOLE REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO

EVENT WILL ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING

ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT,

EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT

APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY

ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and

Microsoft Windows are registered trademarks of Microsoft Corp. Any other trademarks

mentioned in this manual are acknowledged to be the property of the trademark owner.

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY

Product

CrystalView DVI EX / Part number CRK-2DTXT-EX/A1

This equipment generates, uses and can radiate radio frequency energy

and if not installed and used properly, that is in strict accordance with the

manufacturer’s instructions may cause interference to radio communication.

It has been tested and found to comply with the limits for a Class A digital

device in accordance with the specifications of Part 15 of FCC rules, which

are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of

this equipment in a residential area is likely to cause interference, in which

case the user at his own expense will be required to take whatever

measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Operation is subject to the following two conditions:

1- This device may not cause harmful interference

2- This device must accept any interference received including

interference that may cause undesired operation.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la classe A

prescrites dans le Règlement sur le brouillage radioélectrique publié par

Industrie Canada.

CE Statement

The product meets European Standard EMC:

EN-55022:2006+A1:2007 Class A

EN 61000-3-2:2006 + A2(2009)

EN 61000-3-3:2008

EN 55024:1998 + A1(2001) + A2(2003).

IC Statement

This Class A digital apparatus complies with Canadian ICES-003.

TABLE of CONTENTS

Installation and Operations Manual 1

Contents Page #

Disclaimer ...................................................................................................... 2

System introduction ....................................................................................... 2

Features ..................................................................................................... 3

Package Contents...................................................................................... 3

System Overview........................................................................................... 4

CrystalView DVI EX Model ............................................................................ 5

Transmitter and receiver indicators............................................................ 6

CrystalView DVI EX Installation..................................................................... 7

Installation Verification (Refer to Table 1)..................................................8

USB Device Installation.............................................................................. 8

Operating the CrystalView DVI EX ................................................................ 8

Maintenance and Repair.............................................................................. 11

Technical Support........................................................................................ 11

Product Safety ............................................................................................. 12

Figures Page #

Figure 1. Model.............................................................................................. 5

Tables Page #

Table 1. LED Descriptions............................................................................. 6

Appendices Page #

Appendix A – General Specifications .......................................................... 13

Appendix B – Part numbers......................................................................... 14

Appendix C – Recommended Equipment.................................................... 15

INTRODUCTION

2 Installation and Operations Manual

Disclaimer

While every precaution has been taken in the preparation of this manual, the

manufacturer assumes no responsibility for errors or omissions. Neither

does the manufacturer assume any liability for damages resulting from the

use of the information contained herein. The manufacturer reserves the

right to change the specifications, functions, or circuitry of the product

without notice.

The manufacturer cannot accept liability for damages due to misuse of the

product or other circumstances outside the manufacturer’s control. The

manufacturer will not be responsible for any loss, damage, or injury arising

directly or indirectly from the use of this product.

System introduction

Thank you for choosing the Rose Electronics



CrystalViewDVI EX KVM

station extender. The CrystalView DVI EX is the KVM extender of choice for

businesses that need to extend and operate a computer, server, or KVM

switch from a distance. The CrystalView DVI EX makes this possible by the

use of CAT5 cable. You can fully operate and control a computer or server

from 1,640 feet away (500m)). The CrystalView DVI EX supports a wide

variety of DVI-D monitors and video cards. UP to 3 USB peripherals, such

as a keyboard, mouse, speakers, printers, USB mass storage devices and

web cameras can be directly connected to the receiver’s USB ports.

Additional USB devices can be connected using a USB hub. Up to 13 USB

devices and 4 USB hubs are supported.

The system consists of two Units, a transmitter and a receiver. The

transmitter connects to your CPUs USB port and the DVI-D monitor

connector. The receiver normally connects to a DVI-D video monitor, a USB

keyboard, a USB mouse, and one other USB device or a USB hub. The

transmitter and receiver are connected together with industry standard

CAT5 cable. The receiver unit can be up to 1,640 feet (500m) from the

transmitter.

Using the CrystalView DVI EX to remotely access your computer has

several advantages over conventional extenders. The CrystalView DVI EX

can access computers used in hazardous industrial environments. This

keeps the users safe and unexposed to any hazards. It can also be used

for interactive digital signage, remote touchscreen applications and medical

environments.

Installation and Operations Manual 3

Features







Supports USB 1.1 or 2.0







Extend your workstation, USB devices, and audio up to 1640 feet

(500m) over industry standard CAT5 UTP solid core cable.







HD resolutions up to 1680x1050, 24-bit color depth are supported at

distances up to 1640ft (500m). The resolution does not degrade over

all supported distances.







Supports all USB 2.0 devices including keyboards, mice, web cams,

flash drives, speakers, microphones, and other USB devices







Operates with USB 2.0 high-speed host controllers and USB 1.1 host

controllers.







Standard USB hubs can be used to increase the maximum number of

connected USB devices to 13.







Up to 500 ma of power is available at each USB port on the receiver

unit for powering high-power USB devices







Plug-and-Play installation, no configuration or set-up needed.







Installation consists of:

1. Connecting the receiver to your USB device(s), DVI monitor,

USB keyboard and mouse, headphone or speakers and

microphone

2. Connect the transmitter to your computer’s USB port and DVI-D

monitor port.

3. Connect the transmitter to the receiver with up to 1640 feet (500

meters) of CAT5 UTP cable

. Apply power and the installation is complete

Package Contents

The package contents consist of the following:



The CrystalView DVI EX units (Transmitter and Receiver)



2 power adapters (+5VDC-Transmitter / +24VDC-Receiver)



6’ USB Type A / B cable



5’ DVI-Dmm cable



Documentation CD

Other cables are usually ordered separately. If the package contents are

not correct, contact Rose Electronics or your reseller so the problem can be

quickly resolved.

OVERVIEW

4 Installation and Operations Manual

System Overview

The CrystalView DVI Ex system consists of two units; a transmitter and a

receiver. The transmitter connects to your computer’s DVI–D video

connector and a USB Type A connector. The receiver connects to a DVI

monitor, a microphone, a headset, and three USB devices. The transmitter

and receiver units are connected together with up to 1,640 feet of solid core

CAT5 or better UTP cable.

Normally two of the USB devices are a USB keyboard and USB mouse.

The other USB port can connect to another USB device such as a USB

printer, scanner, USB hard drive, web cam, and many other compatible USB

devices. If more than three USB devices need to be connected, you can

connect up to 4 USB hub levels and 13 USB devices max to the unit. Keep

in mind that each of the three USB ports on the receiver supplies a

maximum of 500 ma per port. If you connect a four port hub to the unit, the

hub receives 500 ma or 125ma per USB port. A powered hub may be

needed if you have several high power USB devices that only use the USB

port power.

See Appendix C for a list of recommended devices to use in a system

Transmitter

Receiver

Installation and Operations Manual 5

CrystalView DVI EX Model

Transmitter Front View

LED Indicators*

Status

Link

/ Video

/ USB

Transmitter Rear View

Connectors

DVI-D – Video In

Config – Reserved

USB – Type B

Link – RJ45

Power - +5V, 3A adapter

Receiver Front View

LED Indicators*

Status

Link

/ Video

/ USB

Connectors

USB – Type A (3)

Receiver Rear View

Connectors

DVI-D – Video Out

Headphone – 3.5mm

Microphone – 3.5mm

Config - Reserved

Link – RJ45

Power - +24V, 1A adapter

Figure 1. Model

* See Table 1 for LED indicator definitions

6 Installation and Operations Manual

Transmitter and receiver indicators

Description applies to both the transmitter and receiver unless specified

otherwise.

Table 1. LED Descriptions

Indicator Description

Status

(Green LED)

On – System ready

Blinking – System being configured – not ready

Off – No power to the unit

Link

(Green LED)

On – Valid link between the transmitter and

receiver

Off – No link between the transmitter and receiver

Transmitter

On (Green) – Valid link from the host computer to

the transmitter to the Receiver

Blinking (Green) – Video is being transmitted

between the transmitter and

receiver

On (Amber) – Video source not detected at the

transmitter

Blinking (Amber) – Over current detected at one

or more receiver USB ports

Off – No link between the transmitter and receiver

Video

(Green / Amber LED) Receiver

On (Green) – Valid link from the transmitter and

from the monitor

Blinking (Green) – Video is being transmitted

between the transmitter and

receiver

On (Amber) – Monitor not detected at the receiver

DVI-D Video out port or the monitor

is not compatible

Blinking (Amber) – Invalid resolution detected

Off – No link between the transmitter and receiver

USB

(Green / Amber LED)

On (Green) – System properly enumerated on the

host computer

Blinking (Green) – USB data is being transmitter

between the transmitter and

receiver

On (Amber) – USB source not detected at the transmitter

Blinking (Amber) – Over current detected at one

or more receiver USB ports

Off – No link between the transmitter and receiver

OPERATION

Installation and Operations Manual 7

CrystalView DVI EX Installation

It is recommended that initially, power to all equipment be off.

Refer to Figure 2 for a typical system installation diagram.

Installation of the CrystalView DVI EX consists of:

1. Connect the provided USB cable from the transmitter’s USB Type B

connector to an unused USB 2.0 or 1.1 Type A port on the

computer

2. Install the provided DVI cable to the transmitter’s DVI-D video in

connector and to the DVI video connector on the computer

3. Connect your remote monitor to the receiver’s DVI-D video output

port

4. Connect a USB keyboard and USB mouse to two USB Type A ports

on the receiver unit

5. Install a compatible USB device to a USB Type A port on the

receiver unit. (Up to 4 hub levels can be installed, and 13 USB

devices)

6. Connect your microphone and headset to the corresponding 3.5mm

ports on the rear panel of the receiver unit.

7. Connect up to 1,640 feet of CAT5 UTP or better cable between the

Link port on the transmitter and the Link port on the receiver unit.

NOTE: It is recommended that only CAT5 or better UTP solid core

wire cabling terminated with 8 conductor RJ45 connectors

on both ends be used. The combined length of any patch

cords using stranded conductors must not exceed 33 feet

(10 meters). With surface and premise cabling, do not

exceed the max cable length specification of 1,640 feet.

Connecting / applying power

8. Connect the 5V, 3A power adapter to an AC outlet and to the

Transmitter unit

9. Connect the 24V, 1A power adapter to an AC outlet and to the

Receiver unit

10. Turn on the remote monitor and boot the computer. Wait for

approximately one minute for the CrystalView DVI EX units to

initialize.

NOTE: Use only the provided DC power adapters with this product.

Using substitute adapters may cause permanent damage to

the units and will void the warranty.

Autres manuels pour CrystalView DVI EX

Table des matières

Autres manuels Rose electronics Extenseur

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Manuel utilisateur

Rose electronics

Rose electronics CRK-1P1V Manuel utilisateur

Rose electronics

Rose electronics CrystalView CAB-MD6M2MD6F Manuel utilisateur

Rose electronics

Rose electronics CrystalView HDMI 4K60 Manuel utilisateur

Rose electronics

Rose electronics CrystalLink CLK-1U1TP-40M Manuel utilisateur

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Manuel utilisateur

Rose electronics

Rose electronics PS/2 Manuel utilisateur

Rose electronics

Rose electronics RJ45 Manuel utilisateur

Rose electronics

Rose electronics CrystalView Mini Manuel utilisateur

Rose electronics

Rose electronics CrystalView CrystalView TWISTED PAIR KVM... Manuel utilisateur

Rose electronics

Rose electronics CrystalLink USB Fiber Manuel utilisateur

Rose electronics

Rose electronics Orion XTender OT2-SLDTXUD1D Manuel utilisateur

Rose electronics

Rose electronics Xcion DVI/VGA over CATx Manuel utilisateur

Rose electronics

Rose electronics Cybernetech CLK-2U2TP-100M Manuel utilisateur

Rose electronics

Rose electronics CrystalLink CLK-1U4TP-100M/PE Manuel utilisateur

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Manuel utilisateur

Rose electronics

Rose electronics CrystalLink USB-3-2-1 Fiber Manuel utilisateur

Rose electronics

Rose electronics CrystalView USB2 Manuel utilisateur

Rose electronics

Rose electronics CrystalView EX5 Manuel utilisateur

Rose electronics

Rose electronics VideoSplitter CAT5 Manuel utilisateur

Rose electronics

Rose electronics CrystalLink CAT5 Serial Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI Mini Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manuel utilisateur

Rose electronics

Rose electronics CrystalView DVI Plus Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur