Rexing R4 Manuel utilisateur
R4
Quick Start Guide
The information in this manual is subject to change without notice.
www.rexingusa.com
We hope you love your new products as much as we do. If you need assistance, or
have any suggestions to improve it, please contact us.
Our support team will respond to you as soon as possible.
Always a surprise with Rexing
•https://www.facebook.com/rexingusa/
•https://www.instagram.com/rexingdashcam/
•https://www.rexingusa.com/support/registration/
Overview
Thank you for choosing REXING!
Check us out here.
Facebook Instagram Site Product Support
(877) 740-8004
1
What’s in the box?
21 3 4
5 6 8
1. R4 Quick Start Guide
2. Safety Guide
3. 3M Adhesive Mount
4. Suction Cup Mount
5. Rexing R4 Dash Cam
6. Cable Management Tool
7. Car Power Connector
(12ft)
8. R4 Rear Camera with
Extension Cable (22ft)
2
7
R4
Quick Start Guide
Theinformation in this manual is subject to change without notice.
www.rexingusa.com
Safety Guide
www.rexingusa.com
3
Camera Overview
1. 8 IR Lights
2. Power Button / Screen Toggle Button
3. Menu Button / Playback Button
4. Up Button / Mode Button / Wi-Fi Button
5. Down Button / Mic Button
6. OK (Confirm) Button / Video Lock
Button / Record Button
1
11
7. Charger/ Type C Port
8. Micro SD Card Slot
9. Rear Camera Port
10. Mounting Area
11. LED indicator
12. Microphone
The camera is recording when the LED is
flashing red. The device is charging or
powered on when the LED is solid red.
23 4 5 6
10
POWER
7 8 9 12
Screen Icons
4
1. Recording (on)
2. Recording Time (current clip)
3. Video Resolution
4. Current Date (MM/DD/YYYY)
5. Time (24h)
6. Wi-Fi (connected)
7. GPS Signal (connected)
8. Current video file locked
9. Audio Recording (on)
10. Memory Card (Inserted)
11. Battery Charging
1. Recording (off)
2. Wi-Fi (not connected)
3. GPS Signal (Searching)
4. Audio Recording (off)
00:32 2022/12/14 14:22:541080P
Wi-Fi is connected
SSID: FS_CDR_08
PWA2: 12345678
MAC: 54:EF:33:C9:67:08
Long press OK to close Wi-Fi
6 789 10
11
12345
00:32 2022/12/14 14:22:541080P
21 3 4
5
Step 1: Install the Dash Camera
Adhesive Mount: Place the 3M tape on the mount and properly orient the mount
square to the roof and hood line of the vehicle. Firmly press the mount onto the
windshield. Wait at least 20 minutes before mounting the camera. Orient the mount
as shown on the illustration below.
Suction Cup Mount: Remove the protective plastic from the suction cup, clean the
mounting area of the windshield with rubbing alcohol, and wipe dry with a lint free
cloth. Now, clean the back of the suction cup with rubbing alcohol and wipe dry with
a lint free cloth. Next, apply moisture to the suction cup to create a better seal and
mount the suction cup to the windshield as shown below and wait approximately 30
minutes for it to dry. Once dry, attach the device by fitting the tab on the top of the
mount into the slot on the top of the device.
Installation
Orient the mount as shown
6
Step 2: Insert the memory card
The Rexing R4 Plus accepts Class 10/UHS-3 or higher Micro SD memory cards up to
256GB. You will need to insert a memory card before begin recording. Before
inserting or removing a memory card, first ensure you’ve powered down the device.
Gently push the memory card in until you hear a click, and allow the spring release to
push the card out.
7
Press the Menu button twice and toggle
down to Format
Press the OK
button to confirm
formatting the card
Step 3: Power on the Camera and Format the
Memory Card
Power the camera by connecting the charger to the car cigarette lighter and camera.
Before you start using a new memory card, you MUST format the card within the
camera using the format function. Always backup important data stored on the
memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then
turn on the device by connecting to a power source. Press OK to stop recording. Then
press the MENU button twice to enter the Menu.
Video Settings Format
System Settings
8527 MB
Screen Saver
Language English
Close
General
Settings
All date will be
deleted
OK
Cancel
Mount the rear camera as shown below. Use rear camera cable to connect the rear
camera to the R4 camera.
8
Use the UP and DOWN navigation buttons and go to the Format setting. Press the OK
button to confirm the selection. You may now disconnect from power. The camera
will shut down after 3 seconds. The camera should begin recording automatically the
next time it is powered on.
Step 4: Mount the Rear Camera
front
side
cabin
rear
9
Place the camera on the mount and carefully route the power cable around the
windscreen and tuck in under the trim.
Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter.
Connect car charger to the camera. The camera will auto-start recording once
powered on.
Step 5: Installing the Camera onto the Windshield
Connect the
power cable to
the dash cam Plug Type C connector to
the dash cam
Plug charger into
power outlet or
cigarette lighter
Rear Camera
Table des matières
Autres manuels Rexing Caméra embarquée
Rexing
Rexing V2 Manuel utilisateur
Rexing
Rexing V55 Manuel utilisateur
Rexing
Rexing M1 Manuel utilisateur
Rexing
Rexing V33 Plus Manuel utilisateur
Rexing
Rexing V1 Manuel utilisateur
Rexing
Rexing V1PGEN3 Manuel d'installation et d'exploitation
Rexing
Rexing V5 Plus Manuel utilisateur
Rexing
Rexing V1 Manuel utilisateur
Rexing
Rexing V1PGW-4K Manuel utilisateur
Rexing
Rexing M3 Manuel utilisateur
Rexing
Rexing S800 Manuel utilisateur
Rexing
Rexing S1 Pro Manuel utilisateur
Rexing
Rexing V1P Pro Manuel utilisateur
Rexing
Rexing S1 Manuel utilisateur
Rexing
Rexing S3 Manuel utilisateur
Rexing
Rexing P1 Manuel utilisateur
Rexing
Rexing V1P Manuel utilisateur
Rexing
Rexing S300 Manuel utilisateur
Rexing
Rexing DT2 Manuel utilisateur
Rexing
Rexing M2 Max Manuel utilisateur
