Reed Instruments R6200 Manuel utilisateur
2
Table of Contents
Introduction ................................................................................................ 3
Product Quality........................................................................................... 3
Safety ......................................................................................................... 3
Features...................................................................................................... 4
Specications..........................................................................................4-5
Included...................................................................................................... 5
Instrument Description............................................................................... 6
Display Description .................................................................................... 6
Operating Instructions...........................................................................6-12
Power ON/OFF...................................................................................... 6
MAX/MIN/AVG....................................................................................... 7
Indoor/Outdoor Temperature Mode Selection ...................................... 7
Switching the Temperature Unit of Measure ......................................... 7
Switching the Pressure Unit of Measure ............................................... 7
Temperature Display Modes.................................................................. 7
Data Hold............................................................................................... 8
Auto-Power Off ..................................................................................... 8
Backlight Function................................................................................. 8
Internal Memory..................................................................................... 8
Memory Recall....................................................................................... 9
Clear Stored Readings .......................................................................... 9
WBGT Audible Alarm Threshold Setting ............................................... 9
Turn Alarm Function ON/OFF.............................................................. 10
Global Temperature/Ambient Temperature/Humidity
Offset Function...............................................................................10-11
Globe Temperature Offset .............................................................. 10
Ambient Temperature Offset .......................................................... 11
Humidity Offset............................................................................... 11
continued...
3
Pressure Offset Function..................................................................... 11
Error Codes ......................................................................................... 11
Battery Replacement................................................................................ 12
Applications.............................................................................................. 12
Accessories and Replacement Parts ....................................................... 12
Product Care ............................................................................................ 13
Product Warranty ..................................................................................... 13
Product Disposal and Recycling .............................................................. 14
Product Support....................................................................................... 14
Introduction
Thank you for purchasing your REED R6200 WBGT Heat Stress Meter.
Please read the following instructions carefully before using your instrument.
By following the steps outlined in this manual your meter will provide years
of reliable service.
Product Quality
This product has been manufactured to meet stated product specications.
If a certicate of calibration is required please contact the nearest authorized
REED distributor or authorized Service Center. Please note an additional fee
for this service will apply.
Safety
Never attempt to repair or modify your instrument. Dismantling your product,
other than for the purpose of replacing batteries, may cause damage that
will not be covered under the manufacturer's warranty. Servicing should only
be provided by an authorized service center.
4
Features
• Measuresambienttemperature,humidity,wetbulbtemperature,black
globe temperature, WBGT (wet bulb global temperature), heat stress
index, dew point and pressure
• HeatStressIndexmeasureshowhotitfeelswhenhumidityiscombined
with temperature, air movement and radiant heat
•
Black Globe Temperature (GT) monitors the effects of direct solar radiation
on an exposed surface
• In/OutfunctiondisplaystheWBGTvaluewithorwithoutdirectsunexposure
• Multi-linebacklitLCDdisplaysimultaneouslydisplays4measurements
• Maximum,Minimum,AverageandDataHoldfunctions
• Internalmemorystoresupto99measurements
• Userselectableunitofmeasure(°For°C)
• UseradjustableWBGTthresholdalarm(audible)
• Tripodmountforlong-termmonitoring
• Lowbatteryindicatorandautoshutoff
Specifications
Temperature
MeasuringRanges: AirTemperature:32to122°F(0to50°C)
BlackGlobe:32to176°F(0to80°C)
WBGT(Indoor):59to138.2°F(15to59°C)
WBGT(Outdoor):59to132.8°F(15to56°C)Ω
Accuracy: AirTemperature:±1.1°F(±0.6°C)
BlackGlobe:±0.6°C(20~50°C),other±1°C
WBGT(Indoor):±2.7°F(±1.5°C)
WBGT(Outdoor):±3.6°F(±2°C)
Resolution: 0.1°F/°C
Humidity
MeasuringRanges: 0to99.9%RH
Accuracy(@25°C): 10to70%RH:±3%
RestofRange:±5%
Resolution: 0.1%RH
continued...
5
Barometric Pressure
Measuring Range:
300 to 1100hPa (inHg, mmHg switchable)
Accuracy: ±1.5hPa
Resolution: 1hPa, 0.1inHg, 0.1mmHg
General Specifications
DewPoint/WetBulbCalculation:
Yes
Response Time: 1 sec
Display: LCD
Backlight: Yes (non-condensing)
Data Hold: Yes
Min: Yes
Max: Yes
Average: Yes
InternalMemory: Yes,upto99measurements
AutoShut-Off: Yes(after15minutes/off)
User Adjustable
WBGT Alarm: Yes (audible)
Tripod Mountable: Yes
LowBatteryIndicator: Yes
Power Supply: 4 x AAA Batteries, Optional AC Adapter
Product Certications: CE, RoHS
OperatingTemperature: 32to122°F(0to50°C)
OperatingHumidity: <80%(non-condensing)
StorageTemperature: -4to122°F(-20to50°C)
StorageHumidity: <90%(non-condensing)
Dimensions: Instrument: 6.4 x 2.3 x 1.3"
(162x58x32mm)
Black Brass Ball Diameter: 2.0" (50mm)
Weight: 4.8oz(136g)
Included
• Batteries
6
Instrument Description
1. Black Globe Sensor
2. Temperature & Humidity
Sensor
3. LCDDisplay
4. Hold Button
5. Mode Button
6. Set Button
7. Power Button
8. Max/MinButton
9. UnitofMeasurementButton
10. Backlight Button
Display Description
1. Alarm Indicator
2. Relative Humidity Indicator
3. Ambient Temperature Indicator
4. HI, DPT, WB, GT, WBGT
Indicator
5. Barometric Pressure Indicator
Operating Instructions
Power ON/OFF
1. Push the PWR button to turn the meter on.
To turn the meter off, press and hold the
PWR button for approximately 3 seconds.
2.
Whenthemeterispoweredon,theLCDdisplaystheWBGTmodeand
the previously selected "Indoor or Outdoor" WBGT measurement mode.
3. Shortly after, a beep will sound and the instrument will begin taking
measurements.
WBGT WBGT
WBGT
GT
%
hpa
AVG
MIN
MAX
WBGT
HIDPT
%
hpa
GT
%
%
REC
hpa
3
4
5
continued...
WBGT WBGT
WBGT
GT
%
hpa
AVG
MIN
MAX
WBGT
HIDPT
%
hpa
GT
%
%
REC
hpa
3
4
5
3
4
5
6
7
8
9
10
7
MAX/MIN/AVG
1.
Press the MAX/MIN button to cycle through
the maximum, minimum and average
measurements of Ambient Temperature,
Global Temperature and Relative Humidity
since the instrument was powered on.
2. To clear the maximum, minimum and average
readings, press and hold the MAX/MIN
buttonuntil"CLr"appearsatthebottomof
theLCD.Theinstrumentwillautomatically
return to normal operation once the readings
have cleared.
Note:WhenthemeterisMAX/MIN/AVGfunction,theHOLD and MODE
buttons are disabled.
Indoor/Outdoor Temperature Mode Selection
When in the WBGT mode, press and hold the UNIT button to toggle
between indoor or outdoor temperature. The instrument automatically
calculates the measurement using the following parameters:
1. Outdoor formula WBGT = 0.7Tw (wet bulb temperature) + 0.2Tg
(globe temperature) + 0.1Td (air temperature).
2. Indoor formula WBGT = 0.7Tw (wet bulb temperature) + 0.3Tg
(globe temperature).
Switching the Temperature Unit of Measure
Press the UNITbuttontoswitchbetween°Cand°F.
Switching the Pressure Unit of Measure
Press the BKLT button to change the pressure measuring unit.
(hpa--> inHg--> mmHg).
Temperature Display Modes
Press the MODE button to toggle through the GT (Globe temperature) -->
WBGT temperature --> HI (Heat index) --> DPT (Dew point) --> WB (Wet
bulb temperature measurements).
continued...
WBGT WBGT
WBGT
GT
%
hpa
AVG
MIN
MAX
WBGT
HIDPT
%
hpa
GT
%
%
REC
hpa
3
4
5
8
Data Hold
Press the HOLDbuttonundernormalmeasurementanda"HLD"icon
appears on the display to indicate that the meter is in Data Hold.
Note: When data hold is active the MAX/MIN and SET buttons are disabled.
Auto-Power Off
To preserve battery life, the meter is programmed to turn off after
15 minutes of inactivity.
1. To turn this function off, press and hold the HOLD Button while powering
on the meter.
2. Release both buttons simultaneously.
3. TheLCDwillmomentarilydisplay"n"whilepoweringonindicating
the auto-power off feature is disabled.
4. If the meter is turned off then back on, the "Auto-Power Off" feature
will be enabled again.
Backlight Function
Press and hold the "BKLT"buttontoturntheLCDBacklightONorOFF.
Internal Memory
TheR6200hastheabilitytorecordupto99
temperature/relativehumiditypointsinternally.
1. Press the SET button to save a reading.
2.
While the reading is being saved, the "REC"
indicator will appear next to the temperature
reading and the record number appears at the
bottomoftheLCDforapproximately
2 seconds.
continued...
WBGT WBGT
WBGT
GT
%
hpa
AVG
MIN
MAX
WBGT
HIDPT
%
hpa
GT
%
%
REC
hpa
3
4
5
9
Memory Recall
1. Press and hold the MODEbuttontorecalltherecordedTemperature/
RH measurement values and sequential number.
2. Press the HOLD button to scroll up the stored readings.
3. To scroll down the stored readings, press the BKLT button.
4.
To exit memory recall function, press and hold the MODE button at which
point you will be redirected into the WBGT alarm threshold setting.
5. Press and hold the MODE button again to exit the memory recall
function and resume normal operation.
Clear Stored Readings
When required, you can clear the stored readings by pressing and holding
the SETbutton.TheLCDdisplaywillindicate"---"conrmingthatthe
stored values have been cleared.
WBGT Audible Alarm Threshold Setting
(ThedefaultWBGTtemperaturealarmvalueissetat31°)
1. Press and hold the MODE button for 2 seconds and the meter will
enter memory recall function.
2. Press and hold MODE button again to enter
WBGT alarm function.
3. Press the HOLD button to increase the value.
4. Press the BKLT button to decrease the value.
5. Press the UNIT button to conrm your
selectionandjumptothenextdigit.
6. Repeat steps 3 to 5 for each digit.
7. Once the alarm is selected, press and hold the
MODE button to save the value and resume
normal operation.
continued...
WBGT WBGT
WBGT
GT
%
hpa
AVG
MIN
MAX
WBGT
HIDPT
%
hpa
GT
%
%
REC
hpa
3
4
5
10
Turn Alarm Function ON/OFF
After setting up the threshold, press the PWR button and the alarm
indicator will display on the screen indicating the alarm is activated.
Press the PWR button again to disable alarm function.
Global Temperature/Ambient Temperature/Humidity
Offset Function
It is recommended that this unit be calibrated
once a year to ensure measurements stay within
manufacturer's specications. In the case that a
user would like to perform self-verication with a
trusted calibration source follow the offset
procedures below.
To enter the offset function:
1. Power off the meter.
2. Press and hold the MODE and BKLT
buttons while powering on the meter.
3. ReleasebothbuttonswhentheLCD
indicates all 3 parameters with "0.0" values
as shown.
Note: Hold the MAX/MIN button and press the POWER button to select
therequiredoffsettemperaturein°Cor°F.
Globe Temperature Offset
1. Hold the UNIT button and then press the HOLD button to increase
the value.
2. Hold the UNIT button and then press the BKLT button time to
decrease the value.
3. Press the MODE and POWER buttons to save the value.
4. TheLCDdisplaywillindicate"SAVE"
conrming the selection.
5. Repower the meter to resume normal operation.
continued...
WBGT WBGT
WBGT
GT
%
hpa
AVG
MIN
MAX
WBGT
HIDPT
%
hpa
GT
%
%
REC
hpa
3
4
5
Table des matières
Autres manuels Reed Instruments Instrument de mesure
Reed Instruments
Reed Instruments R7700 Manuel utilisateur
Reed Instruments
Reed Instruments R4700SD Manuel utilisateur
Reed Instruments
Reed Instruments R3500 Manuel utilisateur
Reed Instruments
Reed Instruments Smart Series Manuel utilisateur
Reed Instruments
Reed Instruments R6000 Manuel utilisateur
Reed Instruments
Reed Instruments HT-6510A Manuel utilisateur
Reed Instruments
Reed Instruments SMART Series Manuel utilisateur
Reed Instruments
Reed Instruments R7150 Manuel utilisateur
Reed Instruments
Reed Instruments R5055 Manuel utilisateur
Reed Instruments
Reed Instruments R6210 Manuel utilisateur
Reed Instruments
Reed Instruments R2310 Manuel utilisateur
Reed Instruments
Reed Instruments R1620 Manuel utilisateur
Reed Instruments
Reed Instruments Smart Series Manuel utilisateur
Reed Instruments
Reed Instruments R9260 Manuel utilisateur
Reed Instruments
Reed Instruments R9930 Manuel utilisateur
Reed Instruments
Reed Instruments Smart R1610 Manuel utilisateur
Reed Instruments
Reed Instruments SD-4023 Manuel utilisateur
Reed Instruments
Reed Instruments SMART Series Manuel utilisateur
Reed Instruments
Reed Instruments R9400 Manuel utilisateur
Reed Instruments
Reed Instruments R9510 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur