Quantum StorNext QD7000 Manuel utilisateur
DC Power Installation and AC-to-DC
Power Conversion Guide
StorNext QD7000
Firmware 8.40.xx.xx
6-68674-01 Rev A
ii DC Power Installation and AC-to-DC Power Conversion Guide
DC Power Installation and AC-to-DC Power Conversion Guide, 6-68674-01 Rev A, March 2018 Product of USA.
Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not
limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this
publication from time to time without notice.
COPYRIGHT STATEMENT
© 2018 Quantum Corporation. All rights reserved.
Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written authorization of
Quantum Corporation is prohibited by law and constitutes a punishable violation of the law.
TRAEMARK STATEMENT
Artico, Be Certain (and the Q brackets design), DLT, DXi, DXi Accent, DXi V1000, DXi V2000, DXi V4000, GoVault, Lattus, NDX, the
Q logo, the Q Quantum logo, Q-Cloud, Quantum (and the Q brackets design), the Quantum logo, Quantum Be Certain (and the Q
brackets design), Quantum Vision, Scalar, StorageCare, StorNext, SuperLoader, Symform, the Symform logo (and design), vmPRO,
and Xcellis are either registered trademarks or trademarks of Quantum Corporation and its affiliates in the United States and/or
other countries. All other trademarks are the property of their respective owners.
Products mentioned herein are for identification purposes only and may be registered trademarks or trademarks of their respective
companies. All other brand names or trademarks are the property of their respective owners.
Quantum specifications are subject to change.
iii
Preface
Note: The 8.40.xx.xx firmware (Madrid) is used in the QD7000
(E5600, Titan RAID controller, only). Refer to the NetApp to
Quantum Naming Decoder section for additional information.
This section provides the following information:
•Audience
•Prerequisites
•NetApp to Quantum Naming Decoder
•Product Safety Statements
•Contacts
•Comments
•Quantum Global Services
Audience This manual is intended for storage customers and technicians.
DC Power Installation and AC-to-DC Power Conversion Guide
Preface
iv
Prerequisites Prerequisites for installing and using this product include knowledge of:
• Servers and computer networks
• Network administration
• Storage system installation and configuration
• Storage area network (SAN) management and direct attach storage
(DAS)
• Fibre Channel (FC) and Ethernet protocols
NetApp to Quantum
Naming Decoder
Use Table 1 to correlate the NetApp product nomenclature to the
equivalent Quantum-storage naming conventions.
Table 1 Product Nomenclature
E-Series NetApp
Product Quantum-Storage Description
Controller-Drive Tray Base System Quantum uses Base System when referring to a drive
tray with the RAID controllers.
Drive Tray Expansion Unit Quantum uses Expansion Unit when referring to a
drive tray with the environmental services modules
(ESMs).
E5600 (Code Name:
Titan)
RAID Controller Four 16Gb/s FC SFP+ host ports
E5500 (Code Name:
Soyuz)
RAID Controller Four 16Gb/s FC SFP+ host ports
E5400 (Code Name:
Pikes Peak)
RAID Controller Four 8Gb/s FC SFP+ host ports
DE6600 (Code Name:
Wembley)
4U 60-drive
enclosure
Sixty 3.5 inch disk drives
DC Power Installation and AC-to-DC Power Conversion Guide
Preface
v
E5660
• DE6600 4U drive
enclosure
• With E5600 RAID
controllers
(Titan)
Quantum StorNext
QD7000
E5560
• DE6600 4U drive
enclosure
• With E5500 RAID
controllers
(Soyuz)
Quantum StorNext
QD7000
E5460
• DE6600 4U drive
enclosure
• With E5400 RAID
controllers (Pikes
Peak)
Quantum StorNext
QD6000
E-Series NetApp
Product Quantum-Storage Description
DC Power Installation and AC-to-DC Power Conversion Guide
Preface
vi
Product Safety
Statements
Quantum will not be held liable for damage arising from unauthorized
use of the product. The user assumes all risk in this aspect.
This unit is engineered and manufactured to meet all safety and
regulatory requirements. Be aware that improper use may result in
bodily injury, damage to the equipment, or interference with other
equipment.
WARNING: Before operating this product, read all instructions and
warnings in this document and in the system, safety, and
regulatory guide.
E5424
• DE5600 24-drive
2U drive
enclosure
• Code Name:
Camden
• With E5400 RAID
controllers (Pikes
Peak)
Quantum StorNext
QS2400
E5412
• DE1600 12-drive
2U drive
enclosure
• Code Name:
Ebbets
• With E5400 RAID
controllers (Pikes
Peak)
Quantum StorNext
QS1200
E-Series NetApp
Product Quantum-Storage Description
DC Power Installation and AC-to-DC Power Conversion Guide
Preface
vii
DC Power Installation and AC-to-DC Power Conversion Guide
Preface
viii
Contacts For information about contacting Quantum, including Quantum office
locations, go to:
http://www.quantum.com/aboutus/contactus/index.aspx
Comments To provide comments or feedback about this document, or about other
Quantum technical publications, send e-mail to:
Quantum Global
Services
Accelerate service issue resolution with these exclusive Quantum
StorageCare services:
•Service and Support Website - Register products, license software,
browse Quantum Learning courses, check backup software and
operating system support, and locate manuals, FAQs, firmware
downloads, product updates and more in one convenient location.
Benefit today at:
http://www.quantum.com/serviceandsupport/get-help/
index.aspx#contact-support
•eSupport - Submit online service requests, update contact
information, add attachments, and receive status updates via email.
Online Service accounts are free from Quantum. That account can
DC Power Installation and AC-to-DC Power Conversion Guide
Preface
ix
also be used to access Quantum’s Knowledge Base, a
comprehensive repository of product support information. Get
started at:
http://www.quantum.com/customercenter/
For further assistance, or if training is desired, contact the Quantum
Customer Support Center:
North America 1-800-284-5101 (toll free)
+1-720-249-5700
EMEA +800-7826-8888 (toll free)
+49-6131-324-185
APAC +800-7826-8887 (toll free)
+603-7953-3010
For worldwide support:
http://www.quantum.com/serviceandsupport/get-help/
index.aspx#contact-support
DC Power Installation and AC-to-DC Power Conversion Guide
E-Series Systems
DC Power Installation and AC-to-DC Power Conversion Guide
NetApp, Inc.
495 East Java Drive
Sunnyvale, CA 94089
U.S.
Telephone: +1 (408) 822-6000
Fax: +1 (408) 822-4501
Support telephone: +1 (888) 463-8277
Web: http://www.netapp.com
Feedback: [email protected]
Part number: 215-09441_A0
Release date: December 2014
Autres manuels pour StorNext QD7000
13
Table des matières
Autres manuels Quantum Stockage
Quantum
Quantum DLT-S4 Manuel utilisateur
Quantum
Quantum SuperLoader DLT Manuel utilisateur
Quantum
Quantum QX Series Manuel utilisateur
Quantum
Quantum 6-67057-02 Rev A Manuel utilisateur
Quantum
Quantum StorNext M330 Instructions d'installation
Quantum
Quantum DAT 160 Manuel utilisateur
Quantum
Quantum DLTtape DLT 8000 Manuel utilisateur
Quantum
Quantum Scalar i2000 Manuel utilisateur
Quantum
Quantum StorNext QD7000 Manuel utilisateur
Quantum
Quantum ATL M1500 Manuel utilisateur
Quantum
Quantum P2000 Series Manuel utilisateur
Quantum
Quantum StorNext QD6000 Manuel utilisateur
Quantum
Quantum SNC 4000 Mode d’emploi
Quantum
Quantum DXi6900 Guide de démarrage rapide
Quantum
Quantum DX3000 Manuel utilisateur
Quantum
Quantum DLTtape SDLT 600 Manuel utilisateur
Quantum
Quantum StorNext QM1200 Manuel utilisateur
Quantum
Quantum Atlas V Manuel utilisateur
Quantum
Quantum Scalar i80 Manuel utilisateur
Quantum
Quantum Scalar i2000 Mode d’emploi
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur