Quantum PX506 Manuel utilisateur
Document 81-81338-01 D01, June 2005 1
Quantum PX506 and
PX510 Unpacking and
Installation Instructions
Introduction 3
Selecting an Installation Location 4
Rack Space Requirements.........................................................................................5
Environmental Conditions.......................................................................................6
Preparing for the Installation 7
Providing Necessary Tools and Equipment..........................................................7
Taking ESD Precautions ...........................................................................................7
Unpacking the Library 8
Removing the Remaining Packing Materials 11
Installing the Library 15
Locating the Mounting Position............................................................................15
Installing the Library...............................................................................................19
Loading the Tape Cartridges .................................................................................32
Initial Configuration................................................................................................32
Installing Additional Libraries 35
Removing the FlexLink Covers .............................................................................36
Installing the Alignment Hardware......................................................................38
Installing the Libraries ............................................................................................39
Configuring the Libraries in a Multiple Stack.....................................................39
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
2
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
Introduction 3
Introduction 0
This document explains how to unpack the Quantum PX506 and PX510
libraries and install them in a standard 19 in. rack. Once the library is
unpacked and installed, set up the library using the instructions in the
Quantum PX500 Series User’s Guide PN 81-81290.
The Quantum PX506 and PX510 are automated storage and retrieval libraries
consisting of:
• up to six tape drives and up to 88 SDLT cartridges or 100 LTO tape
cartridges for the PX506 (see figure 1).
• up to ten tape drives and up to 171 SDLT or 201 LTO tape cartridges for
the PX510 (see figure 2).
Figure 1 Quantum PX506
Library
Caution: Do NOT unpack the Quantum PX506 or PX510 unless you are
a qualified Quantum field service engineer.
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
4 Selecting an Installation Location
Figure 2 Quantum PX510
Library
Selecting an Installation Location 0
When choosing an installation site for the PX506 and PX510, consider the
following requirements:
•Rack Space Requirements
•Environmental Conditions
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
Selecting an Installation Location 5
Rack Space
Requirements 0Figure 3 shows the minimum rack space required by both the PX506 and
PX510.
• Depth - 31 in (76.2 cm)
• Width - 19 in (48.3 cm)
•Height:
• PX506 - 17.25 in (44 cm) - 10U per library
• PX510 - 31.5 in (80 cm) - 18U per library
•Weight:
• PX506 - 202 lbs. (92 kg) with 6 drives, 4 magazines, and 0 cartridges
installed
• PX510 - 334 lbs. (152 kg) with 10 drives, 10 magazines, and 0
cartridges installed
• Clearance behind library, inside rack - 6 in (15 cm) for serviceability
• Door swing - 3 ft (.91 m)
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
6 Selecting an Installation Location
Figure 3 Rack Space
Requirements
Environmental
Conditions 0The installation site must have the following environmental conditions:
• Humidity: 20%-80% non-condensing
• Temperature: 15°C-35°C (59°F-95°F)
• Altitude: -984 to 10,000 feet (-300 to 3048 meters)
• PX506 power requirements:
• Voltage - 88-264 VAC, 47-63 Hz
• Watts - 325
• PX510 power requirements:
• Voltage - 88-264 VAC, 47-63 Hz
• Watts - 500
PX510 shown
31into36in(78.8to91cm
19in(48.3cm)
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
Preparing for the Installation 7
• Service clearance - 15 in (38 cm) in the front of the library and 12 in (30
cm) in the back of the library
These environmental conditions apply when the PX506 and PX510 libraries
are in operation.
Preparing for the Installation 0
Before you begin the installation procedure in this section, make the
following preparations as described in this section:
•Providing Necessary Tools and Equipment
•Taking ESD Precautions
Providing Necessary
Tools and Equipment 0Provide the following tools for unpacking and installing the PX506 and PX510
libraries:
• #2 PHILLIPS® screwdriver
• Metal pick included in accessory kit
• Wood dowel included in accessory kit
• #1 flat blade screwdriver
• Allen wrench (2.5mm and 3mm) included in accessory kit
• Antistatic wrist strap
Taking ESD
Precautions 0Some components within the PX506 and PX510 libraries contain static-
sensitive parts. To avoid damaging these parts while performing installation
procedures, always observe the following precautions:
• Keep the library turned off during all installation procedures.
• Use an antistatic wrist strap (included in the accessory kit).
• Keep static-sensitive parts in their original shipping containers until
ready for installation. Look for the ESD sticker to identify static sensitive
parts.
Note: For additional PX500 Series specifications (including
environmental requirements during shipping and storage), see the
Quantum PX500 Series User’s Guide (PN 81-81290).
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
8 Unpacking the Library
• Do not place static-sensitive parts on a metal surface. Place them inside
their protective shipping bag or on an antistatic mat.
• Avoid touching connectors and other components.
Unpacking the Library 0
This section explains how to unpack both the PX506 and PX510 library
components and move them to their final installation location. By following
these instructions, you help ensure that the system will continue to be
safeguarded after it arrives at the installation site.
Unpack and remove the following components from the packing materials
(see figure 4 for PX506 and figure 5 for PX510):
1Remove the accessories kit and set it aside.
2With the help of a second person, lift the library chassis up and out of the
shipping carton.
3Place the library on a table approximately waist high.
Note: Dry climates and cold-weather heating environments have lower
relative humidity and are more likely to produce static electricity.
Note: Inspect the outer library packaging for damage. If there is any
damage evident on the library packaging, to not continue with the
installation and contact Quantum customer support.
Note: Unpack the library as close to the installation location as possible.
Warning: At least two people are required to move the library
chassis.
Caution: Lift the library chassis at the sides. Avoid putting the
weight of the library chassis on the front bezel.
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
Unpacking the Library 9
Figure 4 Unpacking the
Libraries (PX506)
Metal bands
Front bezel
Accessories kit
Lift point
Cover
Pallet
Metal bands
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
10 Unpacking the Library
Figure 5 Unpacking the
Libraries (PX510)
Metal bands
Front bezel
Accessories kit
Lift point
Sleeve
Pallet
Metal bands
Lid
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Quantum Stockage
Quantum
Quantum Internal Storage System Travan 40 GB Manuel utilisateur
Quantum
Quantum P4000 Series Manuel utilisateur
Quantum
Quantum Scalar 218 Guide d'installation
Quantum
Quantum StorNext QM1200 Manuel utilisateur
Quantum
Quantum DLTtape SDLT 220 Fiche d'information produit
Quantum
Quantum DXi4701 Manuel utilisateur
Quantum
Quantum Superloader 3 Manuel utilisateur
Quantum
Quantum DLTtape DLT 2000 Manuel
Quantum
Quantum ActiveScale X100 Manuel utilisateur
Quantum
Quantum Scalar i6 Manuel utilisateur
Quantum
Quantum LTO-6 Manuel utilisateur
Quantum
Quantum Scalar i500 Manuel utilisateur
Quantum
Quantum 6-67057-02 Rev A Manuel utilisateur
Quantum
Quantum STD2401LW Manuel utilisateur
Quantum
Quantum Scalar 50 Manuel utilisateur
Quantum
Quantum Scalar i40 Instructions d'utilisation et de sécurité
Quantum
Quantum SuperLoader 3A Series Manuel utilisateur
Quantum
Quantum RDX 8000 Manuel utilisateur
Quantum
Quantum Tape Drive A-Series Manuel utilisateur
Quantum
Quantum Scalar 50 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur