Protech PA-J580 Series Manuel utilisateur

USER

MANUAL

PA-J580 Series

POS System Powered by

Intel®CoreTM i5/i3 / Pentium® /

Celeron®Processor

PA-J580 M3

PA-J580 POS System

All trademarks and registered trademarks mentioned herein are the

property of their respective owners.

This manual is copyrighted in Feb. 2021. You may not reproduce or

transmit in any form or by any means, electronic, or mechanical,

including photocopying and recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up

the system. The information contained in this document is subject to

change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment

not expressly approve by the party responsible for compliance could

void your authority to operate such equipment.

CAUTION: Danger of explosion may occur when the battery

is incorrectly replaced. Replace the battery

only with the

same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.

WARNING: Some internal parts of the system may have high

electrical voltage. We strongly recommend that only qualified

engineers are allowed to open and disassemble the system.

Please operate the LCD and Touchscreen with extra care as

they can be broken easily.

Contents

Revision History ........................................................................................... vii

1Introduction ......................................................................................... 1-2

1.1 About This Manual ....................................................................... 1-2

1.2 POS System Overview ................................................................ 1-3

1.2.1 Panel PC ............................................................................... 1-3

1.2.2 Normal Stand ........................................................................ 1-4

1.2.3 Normal Stand with 15” 2nd Display....................................... 1-5

1.2.4 Normal Stand with VFD......................................................... 1-6

1.3 System Specifications.................................................................. 1-7

1.4 Safety Precautions....................................................................... 1-9

2System Configuration......................................................................... 2-1

2.1 System External I/O Ports Diagram & Pin Assignment ............... 2-2

2.2 Function Buttons and I/O Ports ................................................... 2-3

2.2.1 Power Button......................................................................... 2-3

2.2.2 DC-IN Port............................................................................. 2-3

2.2.3 COM Ports (COM2, COM3, COM4 (option), JCOM4_1) ...... 2-3

2.2.4 VGA Port (VGA) .................................................................... 2-4

2.2.5 LAN Port (LAN) ..................................................................... 2-5

2.2.6 HDMI Port Connector (HDMI) ............................................... 2-6

2.2.7 USB 3.0 Connector (USB1) .................................................. 2-7

2.2.8 USB 2.0 Connector (USB2) .................................................. 2-8

2.2.9 12V DC Out Connector (option) (12V) .................................. 2-9

2.2.10 24V DC Out Connector (option) (24V) .................................. 2-9

2.2.11 12V/24V Power USB Port / Dual USB 2.0 Port (option) .....2-10

2.2.12 Cash Drawer Port (DRW1).................................................. 2-11

2.2.13 Line Out Audio Jack (Line Out) ...........................................2-12

2.2.14 Mic In Audio Jack (MIC) ......................................................2-12

2.3 Main Board Component Locations & Jumper Settings..............2-13

2.4 Jumper & Connector Quick Reference Table ............................ 2-14

2.5 Setting Jumpers......................................................................... 2-16

2.6 Setting Main Board Connectors and Jumpers...........................2-18

2.6.1 COM2, COM3, COM4 Voltage Selection (JP_COM2,

JP_COM3, JP_COM4)........................................................ 2-18

2.6.2 COM Connectors (JCOM2_1, COM3_1, JCOM4_1) .......... 2-19

2.6.3 COM4 Port and iButton Selection (JP4, JP5, JP6) ............. 2-19

2.6.4 Enable COM4 Port Selection (JP23)................................... 2-20

2.6.5 SPI (BIOS) Flash Wafer (JP13)........................................... 2-21

2.6.6 Drawer Ports (DRW1, DRW1-1, DRW1-2)..........................2-21

2.6.7 Dual Cash Drawer Selection with Y-Cable (JP17) .............. 2-21

2.6.8 Cash Drawer Voltage Selection (JP16)............................... 2-22

2.6.9 USB Connectors (JUSB4, JUSB6, JUSB7, JUSB8, JUSB910).

....................................................................................... 2-25

2.6.10 USB 2.0 Port / On Board Touch Selection (JP18, JP14) ....2-27

2.6.11 USB4 / M.2_E (Wi-Fi) Selection (JP20, JP15) ....................2-28

2.6.12 Power for 2nd Display Connector (JVOUT_12V)................ 2-28

2.6.13 Power for Thermal Printer Connector (JVOUT_24V).......... 2-29

2.6.14 Fan Connector (CPU_FAN1) .............................................. 2-29

2.6.15 PS/2 Keyboard function for MSR Device (JPS2) ................2-30

2.6.16 Audio Connector (JAUDIO1)............................................... 2-30

2.6.17 Speaker Connector (JSPK1)...............................................2-31

2.6.18 System LED Wafer (JSYS_LED1) ...................................... 2-31

iii

2.6.19 Power Switch Wafer (JPWR_SW) ...................................... 2-31

2.6.20 System Reset Wafer (JP19)................................................ 2-32

2.6.21 I2C Wafer (JI2C1) ............................................................... 2-32

2.6.22 RTC Coin Battery Wafer (JBAT1)........................................2-32

2.6.23 Clear RTC Data Selection (JRTC1) ....................................2-33

2.6.24 Clear CMOS Data Selection (JCMOS1) .............................2-33

2.6.25 Unlock the Entire SPI Flash (override descriptor setting) (JP1)

....................................................................................... 2-34

2.6.26 SATA 3.0 Connector (SATA1)..............................................2-34

2.6.27 LVDS Connector (JLVDS1) ................................................. 2-35

2.6.28 Inverter Connector (JINV1) .................................................2-36

2.6.29 HDD Power Port (JHDD_PWR1) ........................................2-36

2.6.30 LVDS Resolution Selection (JP7, JP8) ...............................2-37

2.6.31 LVDS VCC Selection (JP11) ............................................... 2-38

2.6.32 LVDS Backlight Control Selection (JP12) ........................... 2-39

2.6.33 M.2 M-Key Connector for SSD (M2_M) ..............................2-40

2.6.34 M.2 E-Key Connector for Wi-Fi (M2_E) .............................. 2-41

2.6.35 On Board Touch Wafer (JTOUCH1).................................... 2-42

2.6.36 Flash MCU Firmware Wafer (JMCU) .................................. 2-42

2.7 VFD Board Component Locations & Pin Assignment ............... 2-43

2.7.1 VFD Board: MB-4003.......................................................... 2-43

2.7.2 Jumper & Connector Quick Reference Table...................... 2-43

2.7.3 Setting MB-4003 VFD Board Connector and Jumper......... 2-44

2.7.3.1 Power Switch Selection (JP12V) ................................. 2-44

2.7.3.2 RS-232 Serial Interface Connector (CN1) ...................2-44

3Software Utilities................................................................................. 3-1

3.1 Driver ........................................................................................... 3-2

3.1.1 Introduction............................................................................ 3-2

3.1.2 Intel®Chipset Software Installation Utility ............................. 3-3

3.1.3 Graphics Driver Utility ........................................................... 3-4

3.1.4 LAN Driver Utility ................................................................... 3-5

3.1.5 Sound Driver Utility................................................................ 3-6

3.1.6 Intel®Management Engine Components Installer Installation ...

......................................................................................... 3-7

3.1.7 Installing Intel®Rapid Storage Technology (RST) Driver Utility .

......................................................................................... 3-8

3.1.8 Microsoft Hotfix kb3211320 and kb3213986 Driver Utility ..3-10

3.2 Peripheral Devices..................................................................... 3-11

3.2.1 VFD: MB-4003 (RS-232)..................................................... 3-11

3.2.1.1 Commands List ............................................................ 3-11

3.2.1.2 OPOS Driver ................................................................ 3-12

3.2.2 Cash Drawer OPOS Driver .................................................3-19

3.3 API ............................................................................................. 3-20

3.3.1 API Package Content.......................................................... 3-20

3.3.2 API Procedure ..................................................................... 3-21

3.3.3 Cash Drawer ....................................................................... 3-24

3.3.4 Watchdog ............................................................................3-25

3.3.5 I-Button................................................................................ 3-26

3.3.6 Fingerprint Reader ..............................................................3-27

3.3.7 RFID .................................................................................... 3-28

3.3.8 VFD ..................................................................................... 3-29

3.3.8.1 Mode Setting ................................................................ 3-30

3.3.8.2 Welcome Message....................................................... 3-30

3.3.8.3 Define Character .......................................................... 3-31

3.3.8.4 Command Send ........................................................... 3-32

3.3.8.5 Firmware Update.......................................................... 3-33

3.3.9 MSR .................................................................................... 3-34

3.4 API Function .............................................................................. 3-35

3.4.1 Cash Drawer Function ........................................................ 3-35

3.4.2Watch Dog Function ............................................................ 3-36

3.5 BIOS Operation ......................................................................... 3-37

3.5.1 BIOS Setup ......................................................................... 3-37

3.5.1.1 Accessing Setup Utility ................................................3-38

3.5.2 Main..................................................................................... 3-40

3.5.3 Advanced ............................................................................3-41

3.5.3.1 Advanced – CPU Configuration ................................... 3-42

3.5.3.2 Advanced – SATA Configuration (AHCI Mode)............3-44

3.5.3.3 Advanced – Intel(R) Rapid Storage Technology.......... 3-45

3.5.3.4 Advanced – PCH-FW Configuration ............................ 3-46

3.5.3.5 Advanced – Trusted Computing................................... 3-47

3.5.3.6 Advanced – ACPI Settings........................................... 3-48

3.5.3.7 Advanced – F81866 Super IO Configuration...............3-49

3.5.3.8 Advanced – Hardware Monitor .................................... 3-54

3.5.3.9 Advanced – F81866 Watchdog Configuration ............. 3-57

3.5.3.10 Advanced – USB Configuration ................................... 3-58

3.5.3.11 Advanced – Network Stack Configuration ................... 3-59

3.5.4 Chipset ................................................................................ 3-60

3.5.4.1 Chipset – System Agent (SA) Configuration................ 3-61

3.5.4.2 Chipset – PCH-IO Configuration.................................. 3-64

3.5.5 Security ............................................................................... 3-66

3.5.6 Boot ..................................................................................... 3-67

3.5.7 Save & Exit.......................................................................... 3-69

3.5.8 Configuring WatchDog Timer ..............................................3-71

3.5.9 Flash BIOS Update ............................................................. 3-73

3.5.10 Resource Maps ................................................................... 3-77

Appendix A System Diagrams....................................................A-1

HDD Tray Disassembly ............................................................................A-2

MSR Module Assembly ............................................................................A-3

i-Button Module Assembly ........................................................................A-4

Fingerprint Module Assembly ...................................................................A-5

Connecting 60W Power Adapter ..............................................................A-6

Front Cover Assembly Exploded Diagram ...............................................A-8

LCD Holder Assembly Exploded Diagrams (1) ........................................A-9

LCD Holder Exploded Diagram (2).........................................................A-11

LCD Front Cover Assembly Exploded Diagram .....................................A-12

CPU Heatsink Exploded Diagram ..........................................................A-14

HDD Module Exploded Diagram ............................................................A-15

Back Cover Exploded Diagram ..............................................................A-16

Exploded Diagram for Panel PC HDD Module Assembly ......................A-17

AL Cover Module Exploded Diagram .....................................................A-18

List of Figures

Figure 2-1. MB-4003 VFD Board Component Locations ................ 2-43

Figure 3-1. Extensible Firmware Interface Diagram ....................... 3-37

vii

Revision History

The revision history of PA-J580 User Manual is described below:

Version No.

Revision History

Page No.

Date

Initial Release

2020/09/28

M2 •Revised Section 3.3.8 VFD.

•Added Section 3.3.9 MSR.

3-29 ~3-33

2020/11/20

3-34

M3 •In Section 1.3 System

Specifications, revised the

Touchscreen specification as

“Bezel-free 5-wire analog resistive

projected capacitive”.

1-8

2021/2/3

•Added JTOUCH1 wafer in the

PB-5685 Mainboard diagram.

2-13

•In Section 2.6.9 USB

Connectors, added the

description of “JUSB8 signal is

shared from "JTOUCH1" port and

could be functioned when JP14 is

set 2-3, JP18 is set 1-2[short]."

2-25

•Revised the description of

Section

2.6.10 USB 2.0 Port / On Board

Touch Selection for jumpers

JP18

and JP14.

2-27

•Added the pin definition for On

Board Touch Wafer (JTOUCH1).

2-42

Table des matières

Autres manuels protech Terminal tactile

protech

protech PA-A901 Manuel utilisateur

protech

protech PA-3320 Manuel utilisateur

protech

protech PS6508 Series Manuel utilisateur

protech

protech prox PA-J581 Manuel utilisateur

protech

protech PA-6722 Manuel utilisateur

protech

protech PA-3110 Manuel utilisateur

protech

protech POS-6511 Series Manuel utilisateur

protech

protech prox PA-R120 Manuel utilisateur

protech

protech prox PA-A900 Manuel utilisateur

protech

protech PS8852 Manuel utilisateur

protech

protech prox KS-M333 Manuel utilisateur

protech

protech PA-3055 Manuel utilisateur

protech

protech POS-3520 Manuel utilisateur

protech

protech POS-3152 Series Manuel utilisateur

protech

protech PA-6222 Manuel utilisateur

protech

protech prox PA-A310 Manuel utilisateur

protech

protech PA-3570 Series Manuel utilisateur

protech

protech prox KF-P231 Manuel utilisateur

protech

protech PA-3310 Manuel utilisateur

protech

protech KS-M320 Manuel utilisateur

protech

protech PA-3211 Manuel utilisateur

protech

protech PA-2019 Series Manuel utilisateur

protech

protech prox PA-J580 Manuel utilisateur

protech

protech PA-6225 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur

protech PA-J580 Series Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques