ProJet 160 Mode d’emploi
Using the Removable Build Plate
The ProJet® 160, 260C and 260Plus feature a removable Build Plate, which allows you
to pick up the entire Build Plate and use it as a tray to transport very delicate parts to
the Cleaning Station.
To remove the Build Plate follow the steps below.
Open the printer top cover.1.
Ensure that the Fast Axis is pushed all the way back into its parked position.2.
Following the steps in the Coarse Cleaning section, vacuum as much Core as you can3.
from around the part.
From the Main Menu on the LCD, select ACCESS BUILD PLATE on the LCD menu. The4.
Build Platform will move up above the top of the Build Box, exposing the Build Plate.
After a short time the Build Platform will move back down.5.
Number Component
1 Build Plate (in raised position)
2 Front Overflow
3Service Station
Gently lift the Build Plate (and the part) and place it in the Cleaning Station.5.
When you have cleaned your part and removed it from the Build Plate, clean any6.
remaining Core off the Build Plate.
Thoroughly clean the underside of the Build Plate to remove any Core from the holes that7.
mate with the Locating Pins. Also clean any Core off the Locating Pins.
Return the Build Plate to the Printer. Be sure to align the Build Plate onto the Locating8.
Pins.
Number Component
1 Local pins
2 Front overflow
3Service Station
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels ProJet Imprimante 3D
ProJet
ProJet 60 Series Manuel utilisateur
ProJet
ProJet 5500X Manuel utilisateur
ProJet
ProJet MJP 5600 Manuel d'installation
ProJet
ProJet MJP 5600 Manuel utilisateur
ProJet
ProJet PJ 5000 Manuel utilisateur
ProJet
ProJet MJP 2500 Manuel utilisateur
ProJet
ProJet MJP 5600 Manuel utilisateur
ProJet
ProJet 1000 Manuel utilisateur
ProJet
ProJet 3-D Modelers Manuel utilisateur
ProJet
ProJet HD3000 Manuel utilisateur
