Powerware 5105 Manuel utilisateur

powerware®5105

User’s Guide

450–1500 VA

www.powerware.com

Requesting a Declaration of Conformity

Units that are labeled with a CE mark comply with the following harmonized standards and EU directives:

SHarmonized Standards: EN 50091-1-1 and EN 50091-2

SEU Directives: 73/23/EEC, Council Directive on equipment designed for use within certain voltage limits

93/68/EEC, Amending Directive 73/23/EEC

89/336/EEC, Council Directive relating to electromagnetic compatibility

92/31/EEC, Amending Directive 89/336/EEC relating to EMC

The EC Declaration of Conformity is available upon request for products with a CE mark. For copies of the EC

Declaration of Conformity, contact:

Powerware Corporation

Koskelontie 13

FIN-02920 Espoo

Finland

Phone: +358-9-452 661

Fax: +358-9-452 665 68

Powerware is a registered trademark and Advanced Battery Management (ABM) is a trademark of Powerware

Corporation.

reproduced in any way without the express written approval of Powerware Corporation.

Class A EMC Statements

FCC Part 15

NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

ICES-003

This Class A Interference Causing Equipment meets all requirements of the Canadian Interference Causing Equipment

Regulations ICES-003.

Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matériel brouilleur du Canada.

EN50091-2

Some configurations are classified under EN50091-2 as “Class-A UPS for Unrestricted Sales Distribution.” For these

configurations, the following applies:

WARNING This is a Class A-UPS Product. In a domestic environment, this product may cause radio interference, in

which case, the user may be required to take additional measures.

Special Symbols

The following are examples of symbols used on the UPS to alert you to important information:

Risk of Electric Shock

Do Not Open Cover

CAUTION

CAUTION To reduce the risk of electric shock,

Do not remove cover (or back)

No user-serviceable parts inside

Refer servicing to the factory

RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the

associated warning should be observed.

CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s manual for

additional information, such as important operating and maintenance

instructions.

This symbol indicates that you should not discard the UPS or the UPS batteries

in the trash. The UPS may contain sealed, lead-acid batteries. Batteries must be

recycled.

Powerware®5105 User’s Guide S05146193 A Uncontrolled Copy

TABLE OF CONTENTS

1 Powerware 5105 – One of the Best! 1..................................

2 Installation 3.....................................................

Inspecting the Equipment 3........................................................

Safety Precautions 3............................................................

Installing the UPS 4.............................................................

UPS Rear Panels 6..............................................................

3 Operation 9......................................................

Turning the UPS On 9............................................................

Starting the UPS on Battery 9....................................................

Turning the UPS Off 9...........................................................

Standby Mode 9...............................................................

UPS Front Panel 10..............................................................

AC Input LEDs 11.............................................................

Battery Charge LEDs 11........................................................

Load Level LEDs 12...........................................................

Initiating the Self-Test 12..........................................................

4 Configuration 13...................................................

Why Change Factory Defaults? 13....................................................

Nominal Input Voltage 13.......................................................

Other Settings 13.............................................................

Configuration Mode 13...........................................................

5 UPS Maintenance 17...............................................

UPS and Battery Care 17..........................................................

Storing the UPS and Batteries 17..................................................

When to Replace Batteries 17......................................................

Replacing Batteries 18............................................................

Testing New Batteries 22..........................................................

Recycling the Used Battery 22......................................................

6 Additional UPS Features 23..........................................

Communication Port Configurations 23................................................

Communication Indicator 23......................................................

Pin Out 23..................................................................

Table of Contents

ii Powerware®5105 User’s Guide S05146193 A Uncontrolled Copy

Network Transient Protector 25.....................................................

Load Segments (1000-1500 VA Models Only) 26..........................................

Option Modules (1000-1500 VA Models Only) 26.........................................

7 Specifications 27..................................................

8 Troubleshooting 31.................................................

Audible Alarms and UPS Conditions 31................................................

Silencing an Audible Alarm 31....................................................

Service and Support 33...........................................................

Powerware®5105 User’s Guide S05146193 A Uncontrolled Copy

CHAPTER 1

POWERWARE 5105 – ONE OF THE BEST!

The PowerwareR5105 uninterruptible power system (UPS) protects

your sensitive electronic equipment from basic power problems such as

power failures, power sags, power surges, brownouts, and line noise.

Power outages can occur when you least expect it and power quality can

be erratic. These power problems have the potential to corrupt critical

data, destroy unsaved work sessions, and damage hardware — causing

hours of lost productivity and expensive repairs.

With the Powerware 5105, you can safely eliminate the effects of power

disturbances and guard the integrity of your equipment. The Powerware

5105’s flexibility to handle an array of network devices makes it the

perfect choice to protect your LANs, servers, and workstations.

1000–1500 VA Models450–700 VA Models

Figure 1. Powerware 5105

Because an integral part of power protection is power management

software, the Powerware 5105 comes fully equipped with a

communication port, serial cable, and a CD containing both LanSafe III

for networked systems and FailSafe III for standalone systems.

Powerware 5105 – One of the Best!

2Powerware®5105 User’s Guide S05146193 A Uncontrolled Copy

Providing outstanding performance and reliability, the Powerware

5105’s unique benefits include the following:

SAdvanced Battery Management (ABMt) doubles battery service life,

optimizes recharge time, and provides a warning up to 60 days before

the end of useful battery life.

SBuck and Double Boost regulation ensures consistent voltage to your

load by correcting voltage fluctuations without using battery power.

SSequential shutdown and load management through separate

receptacle groups, called load segments.

SHot-swappable batteries simplify maintenance by allowing you to

replace batteries safely without powering down the critical load.

SNetwork Transient Protector guards your modem, fax machine, and

other network communications equipment from surges.

SStart-on-battery capability allows you to power up the UPS even if

utility power is not available.

SOptional power communication cards provide enhanced

communication capabilities for increased power protection and

longer battery backup times.

SThe Powerware 5105 is backed by worldwide agency approvals.

Powerware®5105 User’s Guide S05146193 A Uncontrolled Copy

CHAPTER 2

INSTALLATION

This section explains:

SEquipment inspection

SSafety precautions

SUPS installation

SUPS rear panels

Inspecting the Equipment

If any equipment has been damaged during shipment, keep the shipping

cartons and packing materials for the carrier or place of purchase and

file a claim for shipping damage. If you discover damage after

acceptance, file a claim for concealed damage.

To file a claim for shipping damage or concealed damage: 1) File with

the carrier within 15 days of receipt of the equipment; 2) Send a copy of

the damage claim within 15 days to your service representative.

Safety Precautions

Read the following precautions before you install the UPS.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS. This manual contains important instructions that you

should follow during installation and maintenance of the UPS and batteries. Please

read all instructions before operating the equipment and save this manual for future

reference.

Installation

4Powerware®5105 User’s Guide S05146193 A Uncontrolled Copy

WARNING

SThis UPS contains its own energy source (batteries). The output receptacles may

carry live voltage even when the UPS is not connected to an AC supply.

SDo not remove or unplug the input cord when the UPS is turned on. This removes

the safety ground from the UPS and the equipment connected to the UPS.

STo reduce the risk of fire or electric shock, install this UPS in a temperature and

humidity controlled, indoor environment, free of conductive contaminants. Ambient

temperature must not exceed 40°C (104°F). Do not operate near water or

excessive humidity (95% max).

STo comply with international standards, the sum of earth leakage current from the

load connected to the UPS must not exceed 1.5 mA.

Installing the UPS

The following steps explain how to install the UPS. Figure 2 shows a

typical installation only. See “UPS Rear Panels” on page 6 for the rear

panel of each model.

NOTE Do not make unauthorized changes to the UPS; otherwise, damage may occur

to your equipment and void your warranty.

1. If you are installing power management software, connect your

computer to the UPS communication port using the supplied

communication cable.

Some power management software has a Load Segment feature

that allows you to control UPS output receptacles. If you plan

to use this feature, read the appropriate sections of your power

management software manual before you install the UPS.

2. On 230V models, plug the UPS power cord into the input

connector on the UPS rear panel.

Autres manuels pour 5105

Table des matières

Autres manuels Powerware UPS

Powerware

Powerware 9910 p Series Manuel utilisateur

Powerware

Powerware 9315 Manuel utilisateur

Powerware

Powerware 5105 Manuel utilisateur

Powerware

Powerware 5140 Manuel utilisateur

Powerware

Powerware PowerRite XT Manuel utilisateur

Powerware

Powerware 5140 Manuel utilisateur

Powerware

Powerware 9315 Manuel utilisateur

Powerware

Powerware UPS 1000 - 2200 Manuel utilisateur

Powerware

Powerware 5125 9910 P18 Manuel utilisateur

Powerware

Powerware 700 3000 VA Manuel utilisateur

Powerware

Powerware 3110 Manuel utilisateur

Powerware

Powerware 9170+ Manuel utilisateur

Powerware

Powerware 9390 Manuel utilisateur

Powerware

Powerware 5125 Manuel utilisateur

Powerware

Powerware 9330 Manuel utilisateur

Powerware

Powerware 9125 Manuel utilisateur

Powerware

Powerware Prestige series 9 Manuel utilisateur

Powerware

Powerware FERRUPS QFER Manuel utilisateur

Powerware

Powerware 9390 Manuel utilisateur

Powerware

Powerware 5119 RM Manuel utilisateur

Powerware

Powerware 9315 Manuel utilisateur

Powerware

Powerware 9330 Manuel utilisateur

Powerware

Powerware BPIV Manuel utilisateur

Powerware

Powerware BPIV 30 kVA Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur