Planet USB 2.0 External Hub UH-421 Manuel utilisateur

Ce manuel convient aux modèles suivants

3

Table des matières

Autres manuels Planet Changer

Planet

Planet POE-400 Manuel utilisateur

Planet

Planet IGS-5225-8P4S-12V Manuel utilisateur

Planet

Planet Switch Manuel utilisateur

Planet

Planet IGS-10020M Manuel utilisateur

Planet

Planet ISW-800T-M12 Manuel utilisateur

Planet

Planet GS-4210 SERIES Manuel utilisateur

Planet

Planet IGS-500T Manuel utilisateur

Planet

Planet WSD-800 Manuel utilisateur

Planet

Planet GSD-504 Manuel utilisateur

Planet

Planet GSD-805 Manuel utilisateur

Planet

Planet GS-6320-8P2X Manuel utilisateur

Planet

Planet IPM-8221 Manuel utilisateur

Planet

Planet SOHOConnect DHD-801 Manuel utilisateur

Planet

Planet IPOE-470 Manuel utilisateur

Planet

Planet XGS-6350-48X2Q4C Manuel utilisateur

Planet

Planet WGS-804HPT Manuel utilisateur

Planet

Planet NOVASwitch GSW-1200S Manuel utilisateur

Planet

Planet FSD-805S15 Manuel utilisateur

Planet

Planet FGSW-4840S Manuel utilisateur

Planet

Planet IGS-4215-4P4Tv2 Manuel utilisateur

Planet

Planet GSW-1600HP Manuel utilisateur

Planet

Planet FNSW-1600P Manuel utilisateur

Planet

Planet FSD-804PS Manuel utilisateur

Planet

Planet POE-400 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Quick Installation Guide

USB 2.0 External Hub

UH-421/UH-430

The UH-421/UH-430 is an Universal Serial Bus (USB) hub, which is an USB cable

concentrator and a bridge between PC USB host controller and USB devices. The

USB hub has one upstream port and four downstream ports. It supports High speed

(480Mbps), full speed (12Mbps) and low speed (1.5Mbps) devices such as mouse,

digital camera, joystick and etc. The USB hub provides bus-powered mode. On UH-

421, it is also support self-powered mode for user to connect external power adapter

to gain the output power and make the high power required USB device work stably.

Provides per port over-current detection and protection to prevent your USB hub

damage when abnormal USB device connected.

Package Content

1 x UH-421/UH-430

1 x Quick Installation Guide

1 x Type-A to Type-B cable (UH-421)

1 x Power Adapter (UH-421)

System Requirement

1. Windows 98/Me/2000/XP/Server2003

2. Macintosh, iMac, G3, 300, 350, 400 with Mac OS 8.1 or above

3. Your PC must have USB host controllers inside the H/W system.

Physical Installation

UH-421:

1. Make sure the PC’s USB driver is installed and work properly.

2. Connect bundled power adapter to UH-421.

3. Use Type-A to Type-B cable to connect your PC USB port and UH-421. The

Type-A side is for PC USB port, Type-B side is for UH-421.

UH-430:

1. Make sure the PC’s USB driver is installed and work properly.

2. Connect UH-430 to your PC USB port.

 NOTE:

1. Please make sure your PC USB port is also work with

USB 2.0 standard. If the USB standard of PC USB port

is 1.1 or 1.0, the USB hub will work with the same stan-

dard to co-work with your PC.

2. Please connect this USB hub to your PC USB port di-

rectly. Please don’t connect to the USB port on an ex-

tra USB card or keyboard. That can prevent the power

which USB hub provided is insufficient for the connected

device needs.

Driver Installation

>> Windows and Macintosh System

1. After connect USB hub to your PC/Mac, they will detect this hub and in-

stalled with built-in driver.

2. If you have seen the request for asking driver, please insert your OS instal-

lation CD and locate the driver path to the CD.

Part No.:2011-AD0040-000